ADMIN-AUTH-STATS-MIB

        The Altiga Administrator Authentication Statistics MIB models counters and objects that are
of management interest for administration authentication.
        
Acronyms
The following acronyms are used in this document:
        
  IP:         Internet Protocol
        
  MIB:        Management Information Base
        
  TACACS:     Terminal Access Controller Access Control System
        
  UDP:        User Datagram Protocol
    
Source file
ADMIN-AUTH-STATS-MIB
Last revised
Identity
altigaAdminAuthStatsMibModule
Base OID
1.3.6.1.4.1.3076.1.1.44.2
Imported Objects
ALTIGA-GLOBAL-REG alAdminAuthMibModule
ALTIGA-MIB alAdminAuthGroup alAdminAuthStats
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ADMIN-AUTH-STATS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ADMIN-AUTH-STATS-MIB::altigaAdminAuthStatsMibModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADMIN-AUTH-STATS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADMIN-AUTH-STATS-MIB::altigaAdminAuthStatsMibModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (20)
.1.3.6.1.4.1.3076.1.1.44.2
.1.3.6.1.4.1.3076.1.1.44.2.1
.1.3.6.1.4.1.3076.1.1.44.2.1.1
.1.3.6.1.4.1.3076.2.1.2.39.1
.1.3.6.1.4.1.3076.2.1.2.39.2
alAdminAuthServIndex
.1.3.6.1.4.1.3076.2.1.2.39.2.1
.1.3.6.1.4.1.3076.2.1.2.39.2.1.10
.1.3.6.1.4.1.3076.2.1.2.39.2.1.11
.1.3.6.1.4.1.3076.2.1.2.39.2.1.12
.1.3.6.1.4.1.3076.2.1.2.39.2.1.13
.1.3.6.1.4.1.3076.2.1.2.39.2.1.14
.1.3.6.1.4.1.3076.2.1.2.39.2.1.15
.1.3.6.1.4.1.3076.2.1.2.39.2.1.2
.1.3.6.1.4.1.3076.2.1.2.39.2.1.3
.1.3.6.1.4.1.3076.2.1.2.39.2.1.4
.1.3.6.1.4.1.3076.2.1.2.39.2.1.5
.1.3.6.1.4.1.3076.2.1.2.39.2.1.6
.1.3.6.1.4.1.3076.2.1.2.39.2.1.7
.1.3.6.1.4.1.3076.2.1.2.39.2.1.8
.1.3.6.1.4.1.3076.2.1.2.39.2.1.9
Dependencies (4) 4 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. ALTIGA-GLOBAL-REGcisco
  3. ALTIGA-MIBcisco
  4. SNMPv2-CONFrfc
  5. ADMIN-AUTH-STATS-MIBciscoselected
Compliance Statements (1)

OID .1.3.6.1.4.1.3076.1.1.44.2.1.1.1
The compliance statement for agents which
implement the Altiga Administrator Authentication Statistics MIB.
Required groups