ACS8000-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

400

acsScheduledTasksTable

table

.1.3.6.1.4.1.10418.26.2.1.10 · 1 row entry · 12 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsScheduledTasksTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsScheduledTasksTable'

This table contains the list of the scheduled tasks.

acsScheduledTasksTableEntry row .1.3.6.1.4.1.10418.26.2.1.10.1

each entry has the information about the scheduled task

Indexes

acsScheduledTasksTableIndex

Column Syntax OID

acsScheduledTasksTableIndex

A unique index representing an entry in this table.

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…

.1.3.6.1.4.1.10418.26.2.1.10.1.1

acsScheduledTasksTableType

The type of the scheduled task.

Enumeration

Enumerated Values:

1	custom
2	cell-modem-ip-test
3	cell-modem-signal-check
4	save-config-cli

.1.3.6.1.4.1.10418.26.2.1.10.1.2

acsScheduledTasksTableName

Name of the scheduled task.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.1.10.1.3

acsScheduledTasksTableStatus

When set to enabled, the task will be run according to the schedule
defined by acsScheduledTasksTableFrequency.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.10418.26.2.1.10.1.4

acsScheduledTasksTableFrequency

This object defines how often the task will be run.

When set to hourly(1), the task will be run every hour.

When set to daily(2), the task will be run every day at the time
specified by ac…

Enumerationr/w

Enumerated Values:

1	hourly
2	daily
3	weekly
4	monthly

.1.3.6.1.4.1.10418.26.2.1.10.1.5

acsScheduledTasksTableDay

Only used if acsScheduledTasksTableFrequency is set to weekly(3).
The task will be run every week on this day, at the time
specified by acsScheduledTasksTableTime.

Enumerationr/w

Enumerated Values:

1	sunday
2	monday
3	tuesday
4	wednesday
5	thursday
6	friday
7	saturday

.1.3.6.1.4.1.10418.26.2.1.10.1.6

acsScheduledTasksTableDate

Only used if acsScheduledTasksTableFrequency is set to monthly(4).
The task will be run every month on this day, at the time
specified by acsScheduledTasksTableTime.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.1.10.1.7

acsScheduledTasksTableTime

The time of day the task will run. Format must be HH:MM.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.1.10.1.8

acsScheduledTasksTableLastStarted

The timestamp of the last time the task started running.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.1.10.1.9

acsScheduledTasksTableLastResult

The result of the last time the task was run.

OctetString

Constraints:
range: 0-256

.1.3.6.1.4.1.10418.26.2.1.10.1.10

acsScheduledTasksTableScript

The script command used by the task. Only used if
acsScheduledTasksTableType is set to custom(1).

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.10418.26.2.1.10.1.11

acsScheduledTasksTableIpAddress

The IP address used by the cell-modem-ip task. Not used
by all tasks.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.1.10.1.12

acsActiveSessionsTable

table

.1.3.6.1.4.1.10418.26.2.2.2 · 1 row entry · 8 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsActiveSessionsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsActiveSessionsTable'

This table contains the list of active sessions.

acsActiveSessionsTableEntry row .1.3.6.1.4.1.10418.26.2.2.2.1

each entry has the information about the active session

Indexes

acsActiveSessionsTableIndex

Column Syntax OID

acsActiveSessionsTableIndex

A unique index representing an entry in this table.

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.2.2.1.1

acsActiveSessionsTableUser

The name of the user that opens this session.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.2.2.1.2

acsActiveSessionsTableGroup

The name of the group that the user belongs to.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.2.2.1.3

acsActiveSessionsTableType

The session type.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.2.2.1.4

acsActiveSessionsTableConnection

Connection type.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.2.2.1.5

acsActiveSessionsTableSessionTime

Time of the session

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.2.2.1.6

acsActiveSessionsTableFrom

The source IP address of the session.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.2.2.1.7

acsActiveSessionsTableKill

A set value of killSession(2) will kill the session.
noAction(1) = always returned in a GET. Does nothing if SET.
killSession(2)= when SET the appliance immediately kills the session.

Enumerationr/w

Enumerated Values:

1	noAction
2	killSession

.1.3.6.1.4.1.10418.26.2.2.2.1.8

acsSerialPortTable

table

.1.3.6.1.4.1.10418.26.2.3.2 · 1 row entry · 23 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsSerialPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsSerialPortTable'

This table contains information about serial ports.

acsSerialPortTableEntry row .1.3.6.1.4.1.10418.26.2.3.2.1

each entry has the information about specific serial port.

Indexes

acsSerialPortTableNumber

Column Syntax OID

acsSerialPortTableNumber

A unique index representing an entry in this table.
It is the number of the serial port. For AUX port,
the number will be the number of physical serial ports plus 1.

Integer32

Constraints:
range: 1-49

.1.3.6.1.4.1.10418.26.2.3.2.1.1

acsSerialPortTableDeviceName

The associated device name for the serial port.

OctetString

Constraints:
range: 0-25

.1.3.6.1.4.1.10418.26.2.3.2.1.2

acsSerialPortTableStatus

The status of the serial port:
disabled(1) = it was configured as disable.
idle(2) = there is not any session opened in this port.
inUse(3) = there is session(s) opened in this port.

Enumeration

Enumerated Values:

1	disabled
2	idle
3	inUse

.1.3.6.1.4.1.10418.26.2.3.2.1.3

acsSerialPortTableName

Name associated with this serial port.

OctetString

Constraints:
range: 0-25

.1.3.6.1.4.1.10418.26.2.3.2.1.4

acsSerialPortTableProfile

Configured profile for this serial port.

Enumeration

Enumerated Values:

1	casProfile
2	tsProfile
3	dialInProfile
4	powerProfile

.1.3.6.1.4.1.10418.26.2.3.2.1.5

acsSerialPortTablePinOut

RJ45 Pin-out configured for this serial port.

SerialPortPinOut

Type Values:

1	cyclades
2	cisco
3	rs422
4	rs485
5	auto

.1.3.6.1.4.1.10418.26.2.3.2.1.6

acsSerialPortTableComSpeed

Speed configured for this serial port.

SerialPortSpeed

Type Values:

300	speed300bps
600	speed600bps
1200	speed1200bps
2400	speed2400bps
4800	speed4800bps
9600	speed9600bps
19200	speed19200bps
38400	speed38400bps
57600	speed57600bps
115200	speed115200bps
230400	speed230400bps
460800	speed460800bps

.1.3.6.1.4.1.10418.26.2.3.2.1.7

acsSerialPortTableComParity

Parity configured for this serial port.

Enumeration

Enumerated Values:

1	none
2	odd
3	even

.1.3.6.1.4.1.10418.26.2.3.2.1.8

acsSerialPortTableComDataSize

Data Size configured for this serial port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.3.2.1.9

acsSerialPortTableComStopBits

Number of Stop Bits configured for this serial port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.3.2.1.10

acsSerialPortTableComFlowControl

Flow Control configured for this serial port.

Enumeration

Enumerated Values:

1	none
2	hardware
3	software

.1.3.6.1.4.1.10418.26.2.3.2.1.11

acsSerialPortTableSignalStateDTR

State of the DTR RS-232C signal.

SerialPortSignalState

Type Values:

1	up
2	down

.1.3.6.1.4.1.10418.26.2.3.2.1.12

acsSerialPortTableSignalStateDCD

State of the DCD RS-232C signal.

SerialPortSignalState

Type Values:

1	up
2	down

.1.3.6.1.4.1.10418.26.2.3.2.1.13

acsSerialPortTableSignalStateRTS

State of the RTS RS-232C signal.

SerialPortSignalState

Type Values:

1	up
2	down

.1.3.6.1.4.1.10418.26.2.3.2.1.14

acsSerialPortTableSignalStateCTS

State of the CTS RS-232C signal.

SerialPortSignalState

Type Values:

1	up
2	down

.1.3.6.1.4.1.10418.26.2.3.2.1.15

acsSerialPortTableTxBytes

The number of transmited bytes by the serial port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.3.2.1.16

acsSerialPortTableRxBytes

The number of received bytes by the serial port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.3.2.1.17

acsSerialPortTableFrameError

The number of frame error detected in the serial port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.3.2.1.18

acsSerialPortTableParityError

The number of parity error detected in the serial port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.3.2.1.19

acsSerialPortTableBreak

The number of break detected in the serial port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.3.2.1.20

acsSerialPortTableOverrun

The number of overrun error detected in the serial port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.3.2.1.21

acsSerialPortTableResetCounters

Resets counters for all statistics for this serial port.
Resets the countes for TxBytes, RxBytes, frame errors,
parity errors, breaks, and overrun errors.

Enumerationr/w

Enumerated Values:

1	no-action
2	resetCounters

.1.3.6.1.4.1.10418.26.2.3.2.1.22

acsSerialPortTableXcvrStatus

Activity status of the RS232 transceiver.

SerialPortSignalState

Type Values:

1	up
2	down

.1.3.6.1.4.1.10418.26.2.3.2.1.23

acsPowerMgmtSerialTable

table

.1.3.6.1.4.1.10418.26.2.5.2 · 1 row entry · 5 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtSerialTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtSerialTable'

Information about each serial port thas has PDU connect.

acsPowerMgmtSerialTableEntry row .1.3.6.1.4.1.10418.26.2.5.2.1

Information about each serial port thas has PDU connect.

Indexes

acsPowerMgmtSerialTableIndex

Column	Syntax	OID
acsPowerMgmtSerialTableIndex The index of the register.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.10418.26.2.5.2.1.1`
acsPowerMgmtSerialTablePortNumber The number of the serial port when the PDU is connected.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.10418.26.2.5.2.1.2`
acsPowerMgmtSerialTableDeviceName The device name of this serial port.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.2.1.3`
acsPowerMgmtSerialTableNumberPDUs Total number of units connected in this serial port.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.10418.26.2.5.2.1.4`
acsPowerMgmtSerialTableNumberUPS Total number of UPS devices connected to this serial port.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.10418.26.2.5.2.1.5`

acsPowerMgmtPDUTable

table

.1.3.6.1.4.1.10418.26.2.5.3 · 1 row entry · 67 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtPDUTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtPDUTable'

This table contains the list of detected PDUs.

acsPowerMgmtPDUTableEntry row .1.3.6.1.4.1.10418.26.2.5.3.1

each entry has the information about the PDU.

Indexes

acsPowerMgmtPDUTablePortNumber acsPowerMgmtPDUTablePduIndex

Column Syntax OID

acsPowerMgmtPDUTablePortNumber

Number of serial port when the PDU is connected.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …

.1.3.6.1.4.1.10418.26.2.5.3.1.1

acsPowerMgmtPDUTablePduIndex

A PDU position in the chain.

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.3.1.2

acsPowerMgmtPDUTablePduId

PDU identification.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.3.1.3

acsPowerMgmtPDUTablePortName

Name of serial port when the PDU is connected.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.3.1.4

acsPowerMgmtPDUTableModel

Model of the PDU.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.3.1.5

acsPowerMgmtPDUTableVendor

Vendor of the PDU.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.3.1.6

acsPowerMgmtPDUTableFirmwareVersion

Version of the PDU firmware.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.3.1.7

acsPowerMgmtPDUTableNumberOfOutlets

Number of outlets of the PDU.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.8

acsPowerMgmtPDUTableCurrentNOSobsolete

Number of current sensors in the PDU.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.9

acsPowerMgmtPDUTableCurrent1Valueobsolete

Current of the sensor 1 in this PDU unit in AMP.
The value of this object is the actual current in
AMP * 10. You need to translate the readed value
(Ex. : value is 5, the current is 0.5 AMP.)

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.10

acsPowerMgmtPDUTableCurrent1Maxobsolete

Maximum current of the sensor 1 in this PDU unit in AMP.
When the PDU does not have support for maximum value,
the value will be 0.
The value of this object is the actual current in
AMP * 10. You need to translate the r…

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.11

acsPowerMgmtPDUTableCurrent2Valueobsolete

Current of the sensor 2 in this PDU unit in AMP.
The value of this object is the actual current in
AMP * 10. You need to translate the readed value
(Ex. : value is 5, the current is 0.5 AMP.)

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.12

acsPowerMgmtPDUTableCurrent2Maxobsolete

Maximum current of the sensor 2 in this PDU unit in AMP.
When the PDU does not have support for maximum value,
the value will be 0.
The value of this object is the actual current in
AMP * 10. You need to translate the r…

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.13

acsPowerMgmtPDUTableCurrent3Valueobsolete

Current of the sensor 3 in this PDU unit in AMP.
The value of this object is the actual current in
AMP * 10. You need to translate the readed value
(Ex. : value is 5, the current is 0.5 AMP.)

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.14

acsPowerMgmtPDUTableCurrent3Maxobsolete

Maximum current of the sensor 3 in this PDU unit in AMP.
When the PDU does not have support for maximum value,
the value will be 0.
The value of this object is the actual current in
AMP * 10. You need to translate the r…

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.15

acsPowerMgmtPDUTableTemperatureNOSobsolete

Number of temperature sensors in the PDU.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.16

acsPowerMgmtPDUTableTemperature1Valueobsolete

Temperature of this PM unit in Celsius degrees.
The value of this object is the actual temperature in
degrees C * 10. You need to translate the readed value
(Ex. : value is 240, the temperature is 24 Celsius.)
If the te…

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.17

acsPowerMgmtPDUTableTemperature1Maxobsolete

Maximum temperature detected in this PM unit in Celsius degrees.
The value will be Zero when the PDU does not have support for maximum value.
The value of this object is the actual temperature in
degrees C * 10. You n…

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.18

acsPowerMgmtPDUTableTemperature2Valueobsolete

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.19

acsPowerMgmtPDUTableTemperature2Maxobsolete

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.20

acsPowerMgmtPDUTableTemperature3Valueobsolete

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.21

acsPowerMgmtPDUTableTemperature3Maxobsolete

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.22

acsPowerMgmtPDUTableHumidityNOSobsolete

Number of humidity sensors in the PDU.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.23

acsPowerMgmtPDUTableHumidity1Valueobsolete

Humidity of this PM unit .
If the humidity measurement is not installed this
value will be 0.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.24

acsPowerMgmtPDUTableHumidity1Maxobsolete

Maximum humidity detected in this PM unit.
If the humidity measurement is not installed or the PDU does not have support for maximum value this
value will be 0.
Set with Zero value to clear the max. temperature.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.25

acsPowerMgmtPDUTableHumidity2Valueobsolete

Humidity of this PM unit .
If the humidity measurement is not installed this
value will be 0.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.26

acsPowerMgmtPDUTableHumidity2Maxobsolete

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.27

acsPowerMgmtPDUTableHumidity3Valueobsolete

Humidity of this PM unit .
If the humidity measurement is not installed this
value will be 0.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.28

acsPowerMgmtPDUTableHumidity3Maxobsolete

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.29

acsPowerMgmtPDUTableVoltageNOSobsolete

Number of voltage sensors in the PDU.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.30

acsPowerMgmtPDUTableVoltage1Valueobsolete

Voltage of this sensor in this PDU unit.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.31

acsPowerMgmtPDUTableVoltage1Maxobsolete

Maximum voltage of this sensor in this PDU unit.
Set with Zero value to clear the maximum voltage.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.32

acsPowerMgmtPDUTableVoltage2Valueobsolete

Voltage of this sensor in this PDU unit.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.33

acsPowerMgmtPDUTableVoltage2Maxobsolete

Maximum voltage of this sensor in this PDU unit.
Set with Zero value to clear the maximum voltage.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.34

acsPowerMgmtPDUTableVoltage3Valueobsolete

Voltage of this sensor in this PDU unit.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.35

acsPowerMgmtPDUTableVoltage3Maxobsolete

Maximum voltage of this sensor in this PDU unit.
Set with Zero value to clear the maximum voltage.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.36

acsPowerMgmtPDUTableNumberOfPhases

Number of phases of this PDU unit.

Enumeration

Enumerated Values:

0	single-phase
3	three-phase

.1.3.6.1.4.1.10418.26.2.5.3.1.37

acsPowerMgmtPDUTableNumberOfBanks

Number of banks of this PDU unit.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.38

acsPowerMgmtPDUTableCurrentValue

Actual value of current sensor in this PDU.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.39

acsPowerMgmtPDUTableCurrentMax

Max detected value of current sensor in this PDU.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.40

acsPowerMgmtPDUTableCurrentMin

Min detected value of current sensor in this PDU.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.41

acsPowerMgmtPDUTableCurrentAvg

Average value for current sensor in this PDU.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.42

acsPowerMgmtPDUTableCurrentReset

Reset max, min and avg values of current.

Enumerationr/w

Enumerated Values:

1	no-action
2	reset

.1.3.6.1.4.1.10418.26.2.5.3.1.43

acsPowerMgmtPDUTableVoltageType

Type of voltage values.

Enumeration

Enumerated Values:

0	none-sensor
1	estimated
2	read

.1.3.6.1.4.1.10418.26.2.5.3.1.44

acsPowerMgmtPDUTableVoltageValue

Actual value of voltage sensor in this PDU unit.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.45

acsPowerMgmtPDUTableVoltageMax

Max detected value of voltage sensor in this PDU unit.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.46

acsPowerMgmtPDUTableVoltageMin

Min detected value of voltage sensor in this PDU unit.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.47

acsPowerMgmtPDUTableVoltageAvg

Average value for voltage sensor in this PDU unit.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.48

acsPowerMgmtPDUTableVoltageReset

Reset max, min and avg values of voltage.

Enumerationr/w

Enumerated Values:

1	no-action
2	reset

.1.3.6.1.4.1.10418.26.2.5.3.1.49

acsPowerMgmtPDUTablePowerType

Type of power consumption values.( W x 10 )

Enumeration

Enumerated Values:

0	none-sensor
1	estimated
2	read

.1.3.6.1.4.1.10418.26.2.5.3.1.50

acsPowerMgmtPDUTablePowerValue

Actual value of power consumption in this PDU unit.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.51

acsPowerMgmtPDUTablePowerMax

Max detected value of power consumption in this PDU unit.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.52

acsPowerMgmtPDUTablePowerMin

Min detected value of power consumption in this PDU unit.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.53

acsPowerMgmtPDUTablePowerAvg

Average value for power consumption in this PDU unit.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.54

acsPowerMgmtPDUTablePowerReset

Reset max, min and avg values of power consumption.

Enumerationr/w

Enumerated Values:

1	no-action
2	reset

.1.3.6.1.4.1.10418.26.2.5.3.1.55

acsPowerMgmtPDUTablePowerFactorType

Type of power factor values.

Enumeration

Enumerated Values:

0	none-sensor
1	estimated
2	read

.1.3.6.1.4.1.10418.26.2.5.3.1.56

acsPowerMgmtPDUTablePowerFactorValue

Actual value of power factor in this PDU unit.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.57

acsPowerMgmtPDUTablePowerFactorMax

Max detected value of power factor in this PDU unit.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.58

acsPowerMgmtPDUTablePowerFactorMin

Min detected value of power factor in this PDU unit.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.59

acsPowerMgmtPDUTablePowerFactorAvg

Average value for power factor in this PDU unit.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.60

acsPowerMgmtPDUTablePowerFactorReset

Reset max, min and avg values of power factor.

Enumerationr/w

Enumerated Values:

1	no-action
2	reset

.1.3.6.1.4.1.10418.26.2.5.3.1.61

acsPowerMgmtPDUTableAlarm

Show the PDU alarm status.

Enumeration

Enumerated Values:

1	normal
2	blow-fuse
3	hw-ocp
4	high-critical
5	high-warning
6	low-warning
7	low-critical

.1.3.6.1.4.1.10418.26.2.5.3.1.62

acsPowerMgmtPDUTableEnvSensors

Number of environmental sensor in this PDU.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.3.1.63

acsPowerMgmtPDUTableAgentSerialNumber

Serial number of the agent.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.3.1.64

acsPowerMgmtPDUTablePduModelNumber

Model number of the PDU.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.3.1.65

acsPowerMgmtPDUTablePduSerialNumber

Serial number of the PDU.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.3.1.66

acsPowerMgmtPDUTablePduPartNumber

Part number of the PDU.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.3.1.67

acsPowerMgmtOutletsTable

table

.1.3.6.1.4.1.10418.26.2.5.5 · 1 row entry · 8 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtOutletsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtOutletsTable'

This table contains the information about outlets.

acsPowerMgmtOutletsTableEntry row .1.3.6.1.4.1.10418.26.2.5.5.1

each entry has the information about the outlet.

Indexes

acsPowerMgmtOutletsTablePortNumber acsPowerMgmtOutletsTablePduNumber acsPowerMgmtOutletsTableNumber

Column Syntax OID

acsPowerMgmtOutletsTablePortNumber

Serial Port number.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.5.1.1

acsPowerMgmtOutletsTablePduNumber

Index.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.5.1.2

acsPowerMgmtOutletsTableNumber

Number of the outlet in the PDU.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.5.1.3

acsPowerMgmtOutletsTableName

Name of the outlet.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.5.1.4

acsPowerMgmtOutletsTableStatus

Status of the outlet.

Enumeration

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.10418.26.2.5.5.1.5

acsPowerMgmtOutletsTablePowerControl

A set value of power*(2-6) will send command to PDU.
noAction(1) = always returned in a GET. Does nothing if SET.
powerOn(2) = when SET the power On command is sent to PDU.
powerOff(3) = when SET the power Off command …

Enumerationr/w

Enumerated Values:

1	noAction
2	powerOn
3	powerOff
4	powerCycle
5	powerLock
6	powerUnlock

.1.3.6.1.4.1.10418.26.2.5.5.1.6

acsPowerMgmtOutletsTablePortName

Serial Port Name where the PDU is connected.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.5.1.7

acsPowerMgmtOutletsTablePduId

PDU identification.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.5.1.8

acsPowerMgmtGroupTable

table

.1.3.6.1.4.1.10418.26.2.5.7 · 1 row entry · 4 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtGroupTable'

This table contains the information about group of outlets.

acsPowerMgmtGroupTableEntry row .1.3.6.1.4.1.10418.26.2.5.7.1

each entry has the information about group of outlets.

Indexes

acsPowerMgmtGroupTableIndex

Column Syntax OID

acsPowerMgmtGroupTableIndex

Index of the group.

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.7.1.1

acsPowerMgmtGroupTableName

Name of the group of outlets.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.7.1.2

acsPowerMgmtGroupTableStatus

Status of the group of outlet.

Enumeration

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.10418.26.2.5.7.1.3

acsPowerMgmtGroupTablePowerControl

Enumerationr/w

Enumerated Values:

1	noAction
2	powerOn
3	powerOff
4	powerCycle

.1.3.6.1.4.1.10418.26.2.5.7.1.4

acsPowerMgmtPhasesTable

table

.1.3.6.1.4.1.10418.26.2.5.8 · 1 row entry · 30 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtPhasesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtPhasesTable'

This table contains data monitoring of each detected phase.

acsPowerMgmtPhasesTableEntry row .1.3.6.1.4.1.10418.26.2.5.8.1

each entry has the data monitoring about phases.

Indexes

acsPowerMgmtPhasesTablePortNumber acsPowerMgmtPhasesTablePduIndex acsPowerMgmtPhasesTablePhaseIndex

Column Syntax OID

acsPowerMgmtPhasesTablePortNumber

Number of serial port when the PDU is connected.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.8.1.1

acsPowerMgmtPhasesTablePduIndex

A PDU position in the chain.

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.8.1.2

acsPowerMgmtPhasesTablePhaseIndex

phase index in the PDU.

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.8.1.3

acsPowerMgmtPhasesTablePhaseName

phase name in the PDU.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.8.1.4

acsPowerMgmtPhasesTablePduId

PDU identification.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.8.1.5

acsPowerMgmtPhasesTablePortName

Name of serial port when the PDU is connected.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.8.1.6

acsPowerMgmtPhasesTableCurrentValue

Actual value of current sensor in this phase.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.7

acsPowerMgmtPhasesTableCurrentMax

Max detected value of current sensor in this phase.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.8

acsPowerMgmtPhasesTableCurrentMin

Min detected value of current sensor in this phase.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.9

acsPowerMgmtPhasesTableCurrentAvg

Average value for current sensor in this phase.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.10

acsPowerMgmtPhasesTableCurrentReset

Reset max, min and avg values of current.

Enumerationr/w

Enumerated Values:

1	no-action
2	reset

.1.3.6.1.4.1.10418.26.2.5.8.1.11

acsPowerMgmtPhasesTableVoltageType

Type of voltage values.

Enumeration

Enumerated Values:

0	none-sensor
1	estimated
2	read

.1.3.6.1.4.1.10418.26.2.5.8.1.12

acsPowerMgmtPhasesTableVoltageValue

Actual value of voltage sensor in this phase.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.13

acsPowerMgmtPhasesTableVoltageMax

Max detected value of voltage sensor in this phase.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.14

acsPowerMgmtPhasesTableVoltageMin

Min detected value of voltage sensor in this phase.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.15

acsPowerMgmtPhasesTableVoltageAvg

Average value for voltage sensor in this phase.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.16

acsPowerMgmtPhasesTableVoltageReset

Reset max, min and avg values of voltage.

Enumerationr/w

Enumerated Values:

1	no-action
2	reset

.1.3.6.1.4.1.10418.26.2.5.8.1.17

acsPowerMgmtPhasesTablePowerType

Type of power consumption values.

Enumeration

Enumerated Values:

0	none-sensor
1	estimated
2	read

.1.3.6.1.4.1.10418.26.2.5.8.1.18

acsPowerMgmtPhasesTablePowerValue

Actual value of power consumption in this phase.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.19

acsPowerMgmtPhasesTablePowerMax

Max detected value of power consumption in this phase.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.20

acsPowerMgmtPhasesTablePowerMin

Min detected value of power consumption in this phase.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.21

acsPowerMgmtPhasesTablePowerAvg

Average value for power consumption in this phase.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.22

acsPowerMgmtPhasesTablePowerReset

Reset max, min and avg values of power consumption.

Enumerationr/w

Enumerated Values:

1	no-action
2	reset

.1.3.6.1.4.1.10418.26.2.5.8.1.23

acsPowerMgmtPhasesTablePowerFactorType

Type of power factor values.

Enumeration

Enumerated Values:

0	none-sensor
1	estimated
2	read

.1.3.6.1.4.1.10418.26.2.5.8.1.24

acsPowerMgmtPhasesTablePowerFactorValue

Actual value of power factor in this phase.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.25

acsPowerMgmtPhasesTablePowerFactorMax

Max detected value of power factor in this phase.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.26

acsPowerMgmtPhasesTablePowerFactorMin

Min detected value of power factor in this phase.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.27

acsPowerMgmtPhasesTablePowerFactorAvg

Average value for power factor in this phase.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.8.1.28

acsPowerMgmtPhasesTablePowerFactorReset

Reset max, min and avg values of power factor.

Enumerationr/w

Enumerated Values:

1	no-action
2	reset

.1.3.6.1.4.1.10418.26.2.5.8.1.29

acsPowerMgmtPhasesTableAlarm

Show the phase alarm status.

Enumeration

Enumerated Values:

1	normal
2	blow-fuse
3	hw-ocp
4	high-critical
5	high-warning
6	low-warning
7	low-critical

.1.3.6.1.4.1.10418.26.2.5.8.1.30

acsPowerMgmtBanksTable

table

.1.3.6.1.4.1.10418.26.2.5.9 · 1 row entry · 30 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtBanksTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtBanksTable'

This table contains data monitoring of each detected bank.

acsPowerMgmtBanksTableEntry row .1.3.6.1.4.1.10418.26.2.5.9.1

each entry has the data monitoring about bank.

Indexes

acsPowerMgmtBanksTablePortNumber acsPowerMgmtBanksTablePduIndex acsPowerMgmtBanksTableBankIndex

Column Syntax OID

acsPowerMgmtBanksTablePortNumber

Number of serial port when the PDU is connected.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.9.1.1

acsPowerMgmtBanksTablePduIndex

A PDU position in the chain.

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.9.1.2

acsPowerMgmtBanksTableBankIndex

Bank index in the PDU.

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.9.1.3

acsPowerMgmtBanksTableBankName

Bank name in the PDU.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.9.1.4

acsPowerMgmtBanksTablePduId

PDU identification.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.9.1.5

acsPowerMgmtBanksTablePortName

Name of serial port when the PDU is connected.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.9.1.6

acsPowerMgmtBanksTableCurrentValue

Actual value of current sensor in this bank.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.7

acsPowerMgmtBanksTableCurrentMax

Max detected value of current sensor in this bank.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.8

acsPowerMgmtBanksTableCurrentMin

Min detected value of current sensor in this bank.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.9

acsPowerMgmtBanksTableCurrentAvg

Average value for current sensor in this bank.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.10

acsPowerMgmtBanksTableCurrentReset

Reset max, min and avg values of current.

Enumerationr/w

Enumerated Values:

1	no-action
2	reset

.1.3.6.1.4.1.10418.26.2.5.9.1.11

acsPowerMgmtBanksTableVoltageType

Type of voltage values.

Enumeration

Enumerated Values:

0	none-sensor
1	estimated
2	read

.1.3.6.1.4.1.10418.26.2.5.9.1.12

acsPowerMgmtBanksTableVoltageValue

Actual value of voltage sensor in this bank.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.13

acsPowerMgmtBanksTableVoltageMax

Max detected value of voltage sensor in this bank.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.14

acsPowerMgmtBanksTableVoltageMin

Min detected value of voltage sensor in this bank.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.15

acsPowerMgmtBanksTableVoltageAvg

Average value for voltage sensor in this bank.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.16

acsPowerMgmtBanksTableVoltageReset

Reset max, min and avg values of voltage.

Enumerationr/w

Enumerated Values:

1	no-action
2	reset

.1.3.6.1.4.1.10418.26.2.5.9.1.17

acsPowerMgmtBanksTablePowerType

Type of power consumption values.

Enumeration

Enumerated Values:

0	none-sensor
1	estimated
2	read

.1.3.6.1.4.1.10418.26.2.5.9.1.18

acsPowerMgmtBanksTablePowerValue

Actual value of power consumption in this bank.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.19

acsPowerMgmtBanksTablePowerMax

Max detected value of power consumption in this bank.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.20

acsPowerMgmtBanksTablePowerMin

Min detected value of power consumption in this bank.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.21

acsPowerMgmtBanksTablePowerAvg

Average value for power consumption in this bank.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.22

acsPowerMgmtBanksTablePowerReset

Reset max, min and avg values of power consumption.

Enumerationr/w

Enumerated Values:

1	no-action
2	reset

.1.3.6.1.4.1.10418.26.2.5.9.1.23

acsPowerMgmtBanksTablePowerFactorType

Type of power factor values.

Enumeration

Enumerated Values:

0	none-sensor
1	estimated
2	read

.1.3.6.1.4.1.10418.26.2.5.9.1.24

acsPowerMgmtBanksTablePowerFactorValue

Actual value of power factor in this bank.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.25

acsPowerMgmtBanksTablePowerFactorMax

Max detected value of power factor in this bank.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.26

acsPowerMgmtBanksTablePowerFactorMin

Min detected value of power factor in this bank.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.27

acsPowerMgmtBanksTablePowerFactorAvg

Average value for power factor in this bank.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.9.1.28

acsPowerMgmtBanksTablePowerFactorReset

Reset max, min and avg values of power factor.

Enumerationr/w

Enumerated Values:

1	no-action
2	reset

.1.3.6.1.4.1.10418.26.2.5.9.1.29

acsPowerMgmtBanksTableAlarm

Show the bank alarm status.

Enumeration

Enumerated Values:

1	normal
2	blow-fuse
3	hw-ocp
4	high-critical
5	high-warning
6	low-warning
7	low-critical

.1.3.6.1.4.1.10418.26.2.5.9.1.30

acsPowerMgmtEnvMonTable

table

.1.3.6.1.4.1.10418.26.2.5.10 · 1 row entry · 10 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtEnvMonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtEnvMonTable'

This table contains data monitoring of each detected environmental sensor.

acsPowerMgmtEnvMonTableEntry row .1.3.6.1.4.1.10418.26.2.5.10.1

each entry has the data monitoring about environmental sensors.

Indexes

acsPowerMgmtEnvMonTablePortNumber acsPowerMgmtEnvMonTablePduIndex acsPowerMgmtEnvMonTableIndex

Column Syntax OID

acsPowerMgmtEnvMonTablePortNumber

Number of serial port when the PDU is connected.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.10.1.1

acsPowerMgmtEnvMonTablePduIndex

A PDU position in the chain.

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.10.1.2

acsPowerMgmtEnvMonTableIndex

envmon sensor index.

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.10.1.3

acsPowerMgmtEnvMonTableName

envmon sensor name.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.10.1.4

acsPowerMgmtEnvMonTablePduId

PDU identification.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.10.1.5

acsPowerMgmtEnvMonTablePortName

Name of serial port when the PDU is connected.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.10.1.6

acsPowerMgmtEnvMonTableType

The type of environmental monitor.

Enumeration

Enumerated Values:

1	temp-internal
2	temperature
3	humidity
4	air-flow
5	smoke
6	dry-contact
7	water-level
8	motion
9	unplugged
10	unknown
11	air-pressure
12	vibration
13	vibration-contact
14	leak
15	door-contact
16	dewpoint
17	ad-converter
18	voltage
19	current

.1.3.6.1.4.1.10418.26.2.5.10.1.7

acsPowerMgmtEnvMonTableStatus

Status of digital sensors:
Dry-Contact, Water level, Smoke sensor, Motion sensor, Door-Contact, Leak, A2D.
For Door-Contact, normal(1) = closed, triggered(2) = opened.
For A2D, normal(1) = low, triggered(2) = high.
For …

Enumeration

Enumerated Values:

1	normal
2	triggered
3	not-applicable
4	leak
5	cableFault

.1.3.6.1.4.1.10418.26.2.5.10.1.8

acsPowerMgmtEnvMonTableValue

Detected value for envmon sensors. Temperature: C x 10. Humidity: %. Air flow: afu.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.10.1.9

acsPowerMgmtEnvMonTableMaxValue

Max detected value for envmon sensors. Temperature: C x 10. Humidity: %. Air flow: afu.
Voltage VDC x 100. Current x 100.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.10.1.10

acsPowerMgmtOutElecMonTable

table

.1.3.6.1.4.1.10418.26.2.5.11 · 1 row entry · 24 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtOutElecMonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtOutElecMonTable'

This table contains the information about data monitoring of outlets.

acsPowerMgmtOutElecMonTableEntry row .1.3.6.1.4.1.10418.26.2.5.11.1

each entry has the information about the outlet.

Indexes

acsPowerMgmtOutElecMonTablePortNumber acsPowerMgmtOutElecMonTablePduNumber acsPowerMgmtOutElecMonTableNumber

Column Syntax OID

acsPowerMgmtOutElecMonTablePortNumber

Serial Port number.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.11.1.1

acsPowerMgmtOutElecMonTablePduNumber

Index.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.11.1.2

acsPowerMgmtOutElecMonTableNumber

Number of the outlet in the PDU.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.11.1.3

acsPowerMgmtOutElecMonTableCurrentValue

Actual value of outlet current sensor.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.4

acsPowerMgmtOutElecMonTableCurrentMax

Max detected value of outlet current sensor.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.5

acsPowerMgmtOutElecMonTableCurrentMin

Min detected value of outlet current sensor.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.6

acsPowerMgmtOutElecMonTableCurrentAvg

Average value for outlet current sensor.( A x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.7

acsPowerMgmtOutElecMonTableCurrentReset

Reset max, min and avertage values of outlet current.

Enumerationr/w

Enumerated Values:

1	noAction
2	reset

.1.3.6.1.4.1.10418.26.2.5.11.1.8

acsPowerMgmtOutElecMonTablePowerValue

Actual value of outlet power comsumption sensor.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.9

acsPowerMgmtOutElecMonTablePowerMax

Max detected value of outlet power comsumption sensor.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.10

acsPowerMgmtOutElecMonTablePowerMin

Min detected value of outlet power comsumption sensor.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.11

acsPowerMgmtOutElecMonTablePowerAvg

Average value for outlet power comsumption sensor.( W x 10 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.12

acsPowerMgmtOutElecMonTablePowerReset

Reset max, min and avertage values of outlet power comsumption.

Enumerationr/w

Enumerated Values:

1	noAction
2	reset

.1.3.6.1.4.1.10418.26.2.5.11.1.13

acsPowerMgmtOutElecMonTableVoltageValue

Actual value of outlet voltage sensor.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.14

acsPowerMgmtOutElecMonTableVoltageMax

Max detected value of outlet voltage sensor.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.15

acsPowerMgmtOutElecMonTableVoltageMin

Min detected value of outlet voltage sensor.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.16

acsPowerMgmtOutElecMonTableVoltageAvg

Average value for outlet voltage sensor.( V )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.17

acsPowerMgmtOutElecMonTableVoltageReset

Reset max, min and avertage values of outlet voltage.

Enumerationr/w

Enumerated Values:

1	noAction
2	reset

.1.3.6.1.4.1.10418.26.2.5.11.1.18

acsPowerMgmtOutElecMonTablePowerFactorValue

Actual value of outlet power-factor sensor.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.19

acsPowerMgmtOutElecMonTablePowerFactorMax

Max detected value of outlet power-factor sensor.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.20

acsPowerMgmtOutElecMonTablePowerFactorMin

Min detected value of outlet power-factor sensor.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.21

acsPowerMgmtOutElecMonTablePowerFactorAvg

Average value for outlet power-factor sensor.( PF x 100 )

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.11.1.22

acsPowerMgmtOutElecMonTablePowerFactorReset

Reset max, min and avertage values of outlet power-factor.

Enumerationr/w

Enumerated Values:

1	noAction
2	reset

.1.3.6.1.4.1.10418.26.2.5.11.1.23

acsPowerMgmtOutElecMonTableAlarm

Show the outlet alarm status.

Enumeration

Enumerated Values:

1	normal
2	blow-fuse
3	hw-ocp
4	high-critical
5	high-warning
6	low-warning
7	low-critical

.1.3.6.1.4.1.10418.26.2.5.11.1.24

acsPowerMgmtUPSTable

table

.1.3.6.1.4.1.10418.26.2.5.12 · 1 row entry · 24 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtUPSTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtUPSTable'

This table contains the list of detected UPSs.

acsPowerMgmtUPSTableEntry row .1.3.6.1.4.1.10418.26.2.5.12.1

Each entry has the information about the UPS.

Indexes

acsPowerMgmtUPSTablePortNumber acsPowerMgmtUPSTableUpsIndex

Column Syntax OID

acsPowerMgmtUPSTablePortNumber

Number of serial port when the UPS is connected.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.12.1.1

acsPowerMgmtUPSTableUpsIndex

A UPS position in the chain.

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.12.1.2

acsPowerMgmtUPSTableUpsId

UPS identification.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.3

acsPowerMgmtUPSTablePortName

Name of serial port or IP address if network device

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.4

acsPowerMgmtUPSTableModel

Model of the UPS.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.5

acsPowerMgmtUPSTableVendor

Vendor of the UPS.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.6

acsPowerMgmtUPSTableFirmwareVersion

Version of the UPS firmware.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.7

acsPowerMgmtUPSTableAgentFirmwareVersion

Firmware version of the agent card.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.8

acsPowerMgmtUPSTableSystemStatus

System Status of the UPS.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.9

acsPowerMgmtUPSTableInputBlackOutCount

The number of occurrences, since the last reset, where the input
was not qualified to provide power to the system.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.12.1.10

acsPowerMgmtUPSTableInputBrownOutCount

The number of occurrences, since the last reset, where the system
input voltage has fallen below a pre-determined threshold for a
specified amount of time.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.12.1.11

acsPowerMgmtUPSTableInletAirTemperature

Temperature of the inlet air.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.12

acsPowerMgmtUPSTableNumberOutletGroups

The number of Outlet Groups on this UPS

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.12.1.13

acsPowerMgmtUPSTableUPSSerialNumber

System serial number.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.14

acsPowerMgmtUPSTableUPSManufactureDate

Manufacturing date of the system.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.15

acsPowerMgmtUPSTableAutoRestartDelay

If power is lost, the control will delay this amount of
time after power is restored before restarting the unit.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.5.12.1.16

acsPowerMgmtUPSTableAutoRestartControl

When set to enabled, the UPS will automatically restart the load
when utility power is restored after a battery discharge.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.10418.26.2.5.12.1.17

acsPowerMgmtUPSTableAudibleAlarmControl

Audible alarm control.

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.10418.26.2.5.12.1.18

acsPowerMgmtUPSTableSilenceAlarm

Silence audible alarm.

Enumerationr/w

Enumerated Values:

0	noAction
1	silenceAlarm

.1.3.6.1.4.1.10418.26.2.5.12.1.19

acsPowerMgmtUPSTableInverterState

Inverter on/off state.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.20

acsPowerMgmtUPSTableDCConverterStatus

The operating state of the dc converter.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.21

acsPowerMgmtUPSTableShutdownReason

The reason for the most recent shutdown.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.22

acsPowerMgmtUPSTableUPSTopology

UPS Topology.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.23

acsPowerMgmtUPSTableBypassInverterInputConfig

Input source configuration for the bypass and inverter.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.12.1.24

acsPowerMgmtUPSInputTable

table

.1.3.6.1.4.1.10418.26.2.5.13 · 1 row entry · 18 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtUPSInputTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtUPSInputTable'

This table contains the information about UPS inputs.

acsPowerMgmtUPSInputTableEntry row .1.3.6.1.4.1.10418.26.2.5.13.1

each entry has the information about the UPS inputs.

Indexes

acsPowerMgmtUPSInputTablePortNumber acsPowerMgmtUPSInputTableUpsIndex

Column	Syntax	OID
acsPowerMgmtUPSInputTablePortNumber Serial Port number.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.10418.26.2.5.13.1.1`
acsPowerMgmtUPSInputTableUpsIndex Index.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.10418.26.2.5.13.1.2`
acsPowerMgmtUPSInputTableFrequency Input Frequency.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.3`
acsPowerMgmtUPSInputTableRMSVoltageL1N RMS Voltage L1-N.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.4`
acsPowerMgmtUPSInputTableRMSVoltageL1L2 RMS Voltage L1L2.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.5`
acsPowerMgmtUPSInputTableRMSVoltageL2N RMS Voltage L2N.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.6`
acsPowerMgmtUPSInputTableRMSCurrentL1 RMS Current for L1.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.7`
acsPowerMgmtUPSInputTableRMSCurrentL2 RMS Current for L2.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.8`
acsPowerMgmtUPSInputTableMaxVoltageL1N Input Max Voltage measurement for Line L1-N since the last reset.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.9`
acsPowerMgmtUPSInputTableMinVoltageL1N Input Min Voltage measurement for Line L1-N since the last reset.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.10`
acsPowerMgmtUPSInputTableMaxVoltageL2N Input Max Voltage measurement for Line L2-N since the last reset.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.11`
acsPowerMgmtUPSInputTableMinVoltageL2N Input Min Voltage measurement for Line L1-N since the last reset.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.12`
acsPowerMgmtUPSInputTableNominalVoltage Input nominal voltage.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.13`
acsPowerMgmtUPSInputTableNominalFrequency Input nominal frequency.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.14`
acsPowerMgmtUPSInputTableNominalCurrent Input nominal current.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.15`
acsPowerMgmtUPSInputTableEnergy Input Energy.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.16`
acsPowerMgmtUPSInputTablePowerFactorL1N Input Power Factor for Line 1.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.17`
acsPowerMgmtUPSInputTablePowerFactorL2N Input Power Factor for Line 2.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.13.1.18`

acsPowerMgmtUPSBypassTable

table

.1.3.6.1.4.1.10418.26.2.5.14 · 1 row entry · 9 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtUPSBypassTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtUPSBypassTable'

This table contains the information about UPS bypass.

acsPowerMgmtUPSBypassTableEntry row .1.3.6.1.4.1.10418.26.2.5.14.1

each entry has the information about the UPS bypass.

Indexes

acsPowerMgmtUPSBypassTablePortNumber acsPowerMgmtUPSBypassTableUpsIndex

Column	Syntax	OID
acsPowerMgmtUPSBypassTablePortNumber Serial Port number.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.10418.26.2.5.14.1.1`
acsPowerMgmtUPSBypassTableUpsIndex Index.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.10418.26.2.5.14.1.2`
acsPowerMgmtUPSBypassTableRMSVoltageL1N RMS Voltage L1N.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.14.1.3`
acsPowerMgmtUPSBypassTableRMSVoltageL1L2 RMS Voltage L1L2.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.14.1.4`
acsPowerMgmtUPSBypassTableRMSVoltageL2N RMS Voltage L2N.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.14.1.5`
acsPowerMgmtUPSBypassTableRMSCurrent RMS Current.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.14.1.6`
acsPowerMgmtUPSBypassTableRMSCurrentL2 RMS Current.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.14.1.7`
acsPowerMgmtUPSBypassTableInputFrequency Bypass Input Frequency.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.14.1.8`
acsPowerMgmtUPSBypassTableNominalVoltage Bypass Nominal Voltage.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.14.1.9`

acsPowerMgmtUPSBatteryTable

table

.1.3.6.1.4.1.10418.26.2.5.15 · 1 row entry · 22 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtUPSBatteryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtUPSBatteryTable'

This table contains the information about UPS battery.

acsPowerMgmtUPSBatteryTableEntry row .1.3.6.1.4.1.10418.26.2.5.15.1

each entry has the information about the UPS bypass.

Indexes

acsPowerMgmtUPSBatteryTablePortNumber acsPowerMgmtUPSBatteryTableUpsIndex

Column Syntax OID

acsPowerMgmtUPSBatteryTablePortNumber

Serial Port number.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.15.1.1

acsPowerMgmtUPSBatteryTableUpsIndex

Index.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.15.1.2

acsPowerMgmtUPSBatteryTableDCBusVoltage

DC Bus Voltage

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.3

acsPowerMgmtUPSBatteryTableTimeRemaining

The calculated available time on battery.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.4

acsPowerMgmtUPSBatteryTablePercentageCharge

Battery Percentage Charge.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.5

acsPowerMgmtUPSBatteryTableChargeStatus

Battery Charge Status.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.6

acsPowerMgmtUPSBatteryTableLowBatteryWarningTime

When battery time remaining falls to, or below, this value
(minutes) the low battery alarm is activated.

Integer32r/w

Constraints:
range: 2-30

.1.3.6.1.4.1.10418.26.2.5.15.1.7

acsPowerMgmtUPSBatteryTableTestResult

The outcome of the previous battery test.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.8

acsPowerMgmtUPSBatteryTableDCBusNominalVoltage

Battery DC Bus Nominal Voltage.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.9

acsPowerMgmtUPSBatteryTableNominalBatteryCapacity

Nominal Battery Capacity.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.10

acsPowerMgmtUPSBatteryTableBatteryFloatVoltage

Battery Float Voltage.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.11

acsPowerMgmtUPSBatteryTableBatteryCabinetType

Battery Cabinet Type.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.12

acsPowerMgmtUPSBatteryTableBatteryNumberOfEBC

Number of Extended Battery Cabinets installed.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.13

acsPowerMgmtUPSBatteryTableBatteryRating

Battery Rating.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.14

acsPowerMgmtUPSBatteryTableBatteryDischargeTime

Time on battery operation for this discharge

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.15

acsPowerMgmtUPSBatteryTableBatteryChargeCompensating

Battery charge algorithm changed due to battery temperature.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.16

acsPowerMgmtUPSBatteryTableBatteryChargerState

Battery charger state.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.17

acsPowerMgmtUPSBatteryTableStartBatteryTest

Command to initate a manual battery test.

Enumerationr/w

Enumerated Values:

1	noAction
2	start

.1.3.6.1.4.1.10418.26.2.5.15.1.18

acsPowerMgmtUPSBatteryTableBatteryStatus

Battery Status.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.19

acsPowerMgmtUPSBatteryTableBatteryTotalDischargeTime

Cumulative battery discharge time.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.20

acsPowerMgmtUPSBatteryTableBatteryDischargeCount

Total number of battery discharges.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.21

acsPowerMgmtUPSBatteryTableBatteryCurrent

Current at the battery input terminals. In charging mode,
the current will be a positive value. In discharging mode,
the current will be a negative value.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.15.1.22

acsPowerMgmtUPSOutputTable

table

.1.3.6.1.4.1.10418.26.2.5.16 · 1 row entry · 31 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtUPSOutputTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtUPSOutputTable'

This table contains the information about UPS output.

acsPowerMgmtUPSOutputTableEntry row .1.3.6.1.4.1.10418.26.2.5.16.1

Each entry has the information about the UPS output.

Indexes

acsPowerMgmtUPSOutputTablePortNumber acsPowerMgmtUPSOutputTableUpsIndex

Column	Syntax	OID
acsPowerMgmtUPSOutputTablePortNumber Serial Port number.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.10418.26.2.5.16.1.1`
acsPowerMgmtUPSOutputTableUpsIndex Index.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.10418.26.2.5.16.1.2`
acsPowerMgmtUPSOutputTableApparentPower DC Bus Voltage	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.3`
acsPowerMgmtUPSOutputTableFrequency Output frequency.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.4`
acsPowerMgmtUPSOutputTablePercentPower The system output power as a percentage of the rated capacity.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.5`
acsPowerMgmtUPSOutputTablePercentPowerL1 The system output power on line L1 as a percentage of the rated capacity.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.6`
acsPowerMgmtUPSOutputTablePercentPowerL2 The system output power on line L2 as a percentage of the rated capacity.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.7`
acsPowerMgmtUPSOutputTablePower The sum total power of all system output phases.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.8`
acsPowerMgmtUPSOutputTableRMSCurrentL1 System output RMS current for line L1.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.9`
acsPowerMgmtUPSOutputTableRMSCurrentL2 System output RMS current for line L2.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.10`
acsPowerMgmtUPSOutputTableRMSVoltageL1N The system output RMS voltage.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.11`
acsPowerMgmtUPSOutputTableRMSVoltageL2N The system output RMS voltage.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.12`
acsPowerMgmtUPSOutputTableRMSVoltageL1L2 The system output RMS voltage.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.13`
acsPowerMgmtUPSOutputOffDelay Turns the UPS output off after the number of seconds specified. When a value is written to this object the output will be turned off after the specified time has elapsed and the output will remain off.	Integer32r/w Constraints: `range: 0-300`	`.1.3.6.1.4.1.10418.26.2.5.16.1.14`
acsPowerMgmtUPSOutputOnDelay Turns the UPS output on after the number of seconds specified. When a value is written to this object the output will be turned on after the specified time has elapsed.	Integer32r/w Constraints: `range: 0-300`	`.1.3.6.1.4.1.10418.26.2.5.16.1.15`
acsPowerMgmtUPSOutputCycleDelay Turns the UPS off and then back on after the number of seconds specified. When a value is written to this object the output will turned off immediately and then turned back on after the specified time has elapsed.	Integer32r/w Constraints: `range: 0-300`	`.1.3.6.1.4.1.10418.26.2.5.16.1.16`
acsPowerMgmtUPSOutputTableMaxVoltageL1 The maximum system output voltage measurement for line 1 since the last reset.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.17`
acsPowerMgmtUPSOutputTableMinVoltageL1 The minimum system output voltage measurement for line 1 since the last reset.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.18`
acsPowerMgmtUPSOutputTableMaxVoltageL2 The maximum system output voltage measurement for line 21 since the last reset.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.19`
acsPowerMgmtUPSOutputTableMinVoltageL2 The minimum system output voltage measurement for line 2 since the last reset.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.20`
acsPowerMgmtUPSOutputTableNominalVoltage The nominal (or rated) system output voltage.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.21`
acsPowerMgmtUPSOutputTablePowerNominalFrequency The nominal (or rated) system output frequency.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.22`
acsPowerMgmtUPSOutputTablePowerApparentPowerRating Output apparent power rating.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.23`
acsPowerMgmtUPSOutputTablePowerNominalPowerFactor The nominal (or rated) system power factor.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.24`
acsPowerMgmtUPSOutputTablePowerPowerFactorCorrection The state of the power factor correction circuitry of the system.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.25`
acsPowerMgmtUPSOutputTablePowerL1 The system output power on line 1.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.26`
acsPowerMgmtUPSOutputTablePowerL2 The system output power on line 2.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.27`
acsPowerMgmtUPSOutputTableApparentPowerL1 The system output apparent power on line 1.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.28`
acsPowerMgmtUPSOutputTableApparentPowerL2 The system output apparent power on line 2.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.29`
acsPowerMgmtUPSOutputTablePowerFactorL1 The system output power factor on line 1.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.30`
acsPowerMgmtUPSOutputTablePowerFactorL2 The system output power factor on line 2.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.10418.26.2.5.16.1.31`

acsPowerMgmtUPSEcoModeTable

table

.1.3.6.1.4.1.10418.26.2.5.17 · 1 row entry · 4 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtUPSEcoModeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtUPSEcoModeTable'

This table contains the information about UPS ECO Mode.

acsPowerMgmtUPSEcoModeTableEntry row .1.3.6.1.4.1.10418.26.2.5.17.1

each entry has the information about the UPS ECO Mode.

Indexes

acsPowerMgmtUPSBypassTablePortNumber acsPowerMgmtUPSBypassTableUpsIndex

Column Syntax OID

acsPowerMgmtUPSEcoModeTablePortNumber

Serial Port number.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.17.1.1

acsPowerMgmtUPSEcoModeTableUpsIndex

Index.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.17.1.2

acsPowerMgmtUPSEcoModeTableStatus

Current ECO Mode Status.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.17.1.3

acsPowerMgmtUPSEcoModeTableStateControl

Enable or disable ECO mode.

Enumerationr/w

Enumerated Values:

1	noAction
2	enable
3	disable

.1.3.6.1.4.1.10418.26.2.5.17.1.4

acsPowerMgmtUPSOutletGroupTable

table

.1.3.6.1.4.1.10418.26.2.5.18 · 1 row entry · 6 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsPowerMgmtUPSOutletGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsPowerMgmtUPSOutletGroupTable'

This table contains the UPS Outlet Group Information.

acsPowerMgmtUPSOutletGroupTableEntry row .1.3.6.1.4.1.10418.26.2.5.18.1

Each entry has the UPS outlet group information.

Indexes

acsPowerMgmtUPSOutletGroupTablePortNumber acsPowerMgmtUPSOutletGroupTableUpsIndex acsPowerMgmtUPSOutletGroupTableNumber

Column Syntax OID

acsPowerMgmtUPSOutletGroupTablePortNumber

Serial Port number.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.18.1.1

acsPowerMgmtUPSOutletGroupTableUpsIndex

Index.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.18.1.2

acsPowerMgmtUPSOutletGroupTableNumber

Number of the outletgroup in the UPS.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10418.26.2.5.18.1.3

acsPowerMgmtUPSOutletGroupTableLabel

User-defined label for the outlet group.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.18.1.4

acsPowerMgmtUPSOutletGroupTableState

User-defined label for the outlet group.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.5.18.1.5

acsPowerMgmtUPSOutletGroupTablePowerControl

A set value of power(2-6) will send command to the UPS.
noAction(1) = always returned in a GET. Does nothing if SET.
powerOn(2) = when SET the power On command is sent to UPS.
powerOff(3) = when SET the power Off comma…

Enumerationr/w

Enumerated Values:

1	noAction
2	powerOn
3	powerOff
4	powerCycle

.1.3.6.1.4.1.10418.26.2.5.18.1.6

acsSensors1WireTable

table

.1.3.6.1.4.1.10418.26.2.7.20 · 1 row entry · 22 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsSensors1WireTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsSensors1WireTable'

This table contains the list of detected external 1-wire sensors.

acsSensors1WireTableEntry row .1.3.6.1.4.1.10418.26.2.7.20.1

Each entry has the information about the external 1-wire sensor.

Indexes

acsSensors1WireTableIndex

Column Syntax OID

acsSensors1WireTableIndex

Index of detected 1-wire sensor.

Integer32

Constraints:
range: 1-20

.1.3.6.1.4.1.10418.26.2.7.20.1.1

acsSensors1WireTableName

Name of the 1-wire sensor.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.7.20.1.2

acsSensors1WireTableLocation

Location of the 1-wire sensor.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.7.20.1.3

acsSensors1WireTableAddress

Address of the 1-wire sensor.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.7.20.1.4

acsSensors1WireTableType

Type of 1-wire sensor.

Enumeration

Enumerated Values:

0	sensor-unknown
1	external-temperature
2	external-humidity
3	door-contact
4	dry-contact
5	leak
6	differential-pressure

.1.3.6.1.4.1.10418.26.2.7.20.1.5

acsSensors1WireTableUnit

The unit of the 1-wire sensor.
notApplicable(0) = used for contact or leak sensor
celsius(1) = used for temperature sensor
fahrenheit(2) = used for temperature sensor
percent(3) = used for humidity sensor…

Enumeration

Enumerated Values:

0	notApplicable
1	celsius
2	fahrenheit
3	percent
4	pa

.1.3.6.1.4.1.10418.26.2.7.20.1.6

acsSensors1WireTableValue

Current sensor reading.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.7.20.1.7

acsSensors1WireTableValueMax

Maximum sensor reading detected. Unit is specified in acsSensors1WireTableUnit.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.7.20.1.8

acsSensors1WireTableValueMin

Minimum sensor reading detected. Unit is specified in acsSensors1WireTableUnit.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.7.20.1.9

acsSensors1WireTableValueAvg

Average sensor reading detected. Unit is specified in acsSensors1WireTableUnit.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.7.20.1.10

acsSensors1WireTableValueLowWarning

If the sensor value falls below this value, an event notification
will be generated. Unit is specified in acsSensors1WireTableUnit.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.7.20.1.11

acsSensors1WireTableValueLowCritical

If the sensor value falls below this value, an event notification
will be generated. Unit is specified in acsSensors1WireTableUnit.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.7.20.1.12

acsSensors1WireTableValueHighWarning

If the sensor value rises above this value, an event notification
will be generated. Unit is specified in acsSensors1WireTableUnit.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.7.20.1.13

acsSensors1WireTableValueHighCritical

If the sensor value rises above this value, an event notification
will be generated. Unit is specified in acsSensors1WireTableUnit.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.7.20.1.14

acsSensors1WireTableReset

A set value of update(2) will reset the 1-wire sensor min/max/avg values.

Enumerationr/w

Enumerated Values:

1	noAction
2	reset

.1.3.6.1.4.1.10418.26.2.7.20.1.15

acsSensors1WireTableAnalogAlarm

Status of the 1-wire analog sensor alarm.
Used for temperature, humidity, and differential pressure sensors only.
For all other sensor types the value notApplicable(0) will be returned.

Enumerationr/w

Enumerated Values:

0	notApplicable
1	disabled
2	enabled

.1.3.6.1.4.1.10418.26.2.7.20.1.16

acsSensors1WireTableContactAlarm1

Status of the 1-wire contact sensor alarm.
Used for door and dry contact sensors only.
For all other sensor types the value notApplicable(0) will be returned.

Enumerationr/w

Enumerated Values:

0	notApplicable
1	disabled
2	alarmWhenOpen
3	alarmWhenClosed

.1.3.6.1.4.1.10418.26.2.7.20.1.17

acsSensors1WireTableContactAlarm2

Status of the 1-wire contact sensor alarm.
Used for door and dry contact sensors only.
For all other sensor types the value notApplicable(0) will be returned.

Enumerationr/w

Enumerated Values:

0	notApplicable
1	disabled
2	alarmWhenOpen
3	alarmWhenClosed

.1.3.6.1.4.1.10418.26.2.7.20.1.18

acsSensors1WireTableContactAlarm3

Status of the 1-wire contact sensor alarm.
Used for door and dry contact sensors only.
For all other sensor types the value notApplicable(0) will be returned.

Enumerationr/w

Enumerated Values:

0	notApplicable
1	disabled
2	alarmWhenOpen
3	alarmWhenClosed

.1.3.6.1.4.1.10418.26.2.7.20.1.19

acsSensors1WireTableLeakFilterTime

Leak filter time in seconds.

Enumerationr/w

Enumerated Values:

0	notApplicable
1	filter-time-15
2	filter-time-30
3	filter-time-60
4	filter-time-120

.1.3.6.1.4.1.10418.26.2.7.20.1.20

acsSensors1WireTableLeakAlarm

Status of the leak alarm for the leak sensor.
Used for leak sensors only.
For all other sensor types the value notApplicable(0) will be returned.

Enumerationr/w

Enumerated Values:

0	notApplicable
1	disabled
2	enabled

.1.3.6.1.4.1.10418.26.2.7.20.1.21

acsSensors1WireTableLeakCableFailAlarm

Status of the cable fail alarm for the leak sensor.
Used for leak sensors only.
For all other sensor types the value notApplicable(0) will be returned.

Enumerationr/w

Enumerated Values:

0	notApplicable
1	disabled
2	enabled

.1.3.6.1.4.1.10418.26.2.7.20.1.22

acsSensorsDigitalInTable

table

.1.3.6.1.4.1.10418.26.2.7.21 · 1 row entry · 6 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsSensorsDigitalInTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsSensorsDigitalInTable'

This table contains the list of Digital In sensors.

acsSensorsDigitalInTableEntry row .1.3.6.1.4.1.10418.26.2.7.21.1

Each entry has the information about the Digital In sensor.

Indexes

acsSensorsDigitalInTablePosition

Column Syntax OID

acsSensorsDigitalInTablePosition

Position of the Digital In sensor.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.10418.26.2.7.21.1.1

acsSensorsDigitalInTableName

Name of the Digital In sensor.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.7.21.1.2

acsSensorsDigitalInTableLocation

Location of the Digital In sensor.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.10418.26.2.7.21.1.3

acsSensorsDigitalInTableType

Configurable type of Digital In sensor.

Enumerationr/w

Enumerated Values:

0	custom
1	vibration
2	smoke-ad-s
3	leak-sn-l
4	door
5	motion-ad-im

.1.3.6.1.4.1.10418.26.2.7.21.1.4

acsSensorsDigitalInTableValue

Value of the Digital In sensor.

Enumeration

Enumerated Values:

0	undefined
1	open
2	closed

.1.3.6.1.4.1.10418.26.2.7.21.1.5

acsSensorsDigitalInTableAlarm

Status of the Digital In sensor alarm.

Enumerationr/w

Enumerated Values:

1	disabled
2	alarmWhenOpen
3	alarmWhenClosed

.1.3.6.1.4.1.10418.26.2.7.21.1.6

acsModemsTable

table

.1.3.6.1.4.1.10418.26.2.8.2 · 1 row entry · 37 columns

Open in standard view

Uses the vertiv variant from /opt/observium/mibs/vertiv.

Command help

Walk acsModemsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS8000-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS8000-MIB::acsModemsTable'

This table contains information about the ACS modems,
including auxiliary port built-in modem, pluggable USB
modems, and serial port modems.

acsModemsTableEntry row .1.3.6.1.4.1.10418.26.2.8.2.1

Each entry has the information about a specific modem.

Indexes

acsModemsTableNumber

Column Syntax OID

acsModemsTableNumber

A unique index representing an entry in this table.

Integer32

Constraints:
range: 1-49

.1.3.6.1.4.1.10418.26.2.8.2.1.1

acsModemsTableDeviceName

The associated device name for the modem.

OctetString

Constraints:
range: 0-25

.1.3.6.1.4.1.10418.26.2.8.2.1.2

acsModemsTableStatus

Enables or disbles the modem.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.10418.26.2.8.2.1.3

acsModemsTableProfile

The modem profile. For an integrated cell modem, only dial-out(3) is valid.

Enumerationr/w

Enumerated Values:

1	unconfigured
2	dialIn
3	dialOut

.1.3.6.1.4.1.10418.26.2.8.2.1.4

acsModemsTablePhoneNumber

The dial-out phone number. Only supported if acsModemsTableProfile is
set to dial-out(3). Not used for integrated cellular modem.

OctetStringr/w

Constraints:
range: 0-25

.1.3.6.1.4.1.10418.26.2.8.2.1.5

acsModemsTableComSpeed

The modem speed. Speeds above 230400 not supported by serial port modems.

Enumerationr/w

Enumerated Values:

1200	speed1200
2400	speed2400
4800	speed4800
9600	speed9600
19200	speed19200
38400	speed38400
57600	speed57600
115200	speed115200
230400	speed230400
460800	speed460800
921600	speed921600

.1.3.6.1.4.1.10418.26.2.8.2.1.6

acsModemsTableInitChat

Modem initialization string.

OctetStringr/w

Constraints:
range: 0-1200

.1.3.6.1.4.1.10418.26.2.8.2.1.7

acsModemsTablePppAddressConfig

Supported only if acsModemsTableProfile is set to dial-out(2).
If none(1) or remote(3) is set, then the IP address fields will be cleared.
When at least one IP address is set, this value will be local(2).
If remote(3) i…

Enumerationr/w

Enumerated Values:

0	notApplicable
1	none
2	local
3	remote

.1.3.6.1.4.1.10418.26.2.8.2.1.8

acsModemsTableLocalIpv4Address

Configures the local IPv4 address for the PPP connection.

OctetStringr/w

Constraints:
range: 0-46

.1.3.6.1.4.1.10418.26.2.8.2.1.9

acsModemsTableRemoteIpv4Address

Configures the remote IPv4 address for the PPP connection.

OctetStringr/w

Constraints:
range: 0-46

.1.3.6.1.4.1.10418.26.2.8.2.1.10

acsModemsTableLocalIPv6Address

Configures the local IPv6 address for the PPP connection.

OctetStringr/w

Constraints:
range: 0-46

.1.3.6.1.4.1.10418.26.2.8.2.1.11

acsModemsTableRemoteIPv6Address

Configures the remote IPv6 address for the PPP connection.

OctetStringr/w

Constraints:
range: 0-46

.1.3.6.1.4.1.10418.26.2.8.2.1.12

acsModemsTablePppAuthentication

Configure the PPP authentication protocol. If this is set to remoteChap(5) or
remotePap(6), then you must also set acsModemsTablePppRemoteUsername
and acsModemsTablePppRemotePassphrase.

Enumerationr/w

Enumerated Values:

1	noAuth
2	localPap
3	localChap
4	localEap
5	remoteChap
6	remotePap

.1.3.6.1.4.1.10418.26.2.8.2.1.13

acsModemsTablePppRemoteUsername

Only used if acsModemsTablePppAuthentication is set to
remoteChap(5) or remotePap(6).

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.8.2.1.14

acsModemsTablePppRemotePassphrase

Only used if acsModemsTablePppAuthentication is set to
remoteChap(5) or remotePap(6).

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.8.2.1.15

acsModemsTableChapInterval

CHAP Interval in seconds. Default is 0.
Not used for integrated cellular modem.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.8.2.1.16

acsModemsTableChapMaxChallenge

CHAP Max Challenge value in seconds. Default is 10 seconds.
Not used for integrated cellular modem.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.8.2.1.17

acsModemsTableChapRestart

CHAP Restart value in seconds. Default is 3 seconds.
Not used for integrated cellular modem.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.8.2.1.18

acsModemsTablePppIdleTimeout

PPP idle timeout value in seconds. Default is 0.
Not used for integrated cellular modem.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.8.2.1.19

acsModemsTableModel

Modem vendor model name. Only used for integrated cellular modem.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.8.2.1.20

acsModemsTableCellProvider

Cellular modem service provider. Only used for integrated cellular modem.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.8.2.1.21

acsModemsTableCellRegistration

Cellular modem network registration. Only used for integrated cellular modem.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.8.2.1.22

acsModemsTableCCID

SIM integrated circuit card identifier. Only used for integrated
cellular modem.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.8.2.1.23

acsModemsTableIMSI

International mobile subscriber identity. Only used for integrated
cellular modem.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.8.2.1.24

acsModemsTableIMEI

International mobile equipment identity. Only used for integrated
cellular modem.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.8.2.1.25

acsModemsTableCellStatus

Shows the status of the cellular modem. Only used for integrated
cellular modem.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.10418.26.2.8.2.1.26

acsModemsTableAPN

Access point name. Only used for integrated cellular modem.

OctetStringr/w

Constraints:
range: 0-40

.1.3.6.1.4.1.10418.26.2.8.2.1.27

acsModemsTableMtuSize

The maxiumum transmission unit size for use by the integrated cellular modem.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10418.26.2.8.2.1.28

acsModemsTableReplaceDefaultRoute

If this is set to enabled(2), then the integrated cellular modem
becomes the default gateway. Only used for integrated cellular
modem.

Enumerationr/w

Enumerated Values:

0	notApplicable
1	disabled
2	enabled

.1.3.6.1.4.1.10418.26.2.8.2.1.29

acsModemsTablePersistMode

If this is set to 'yes' then the integrated cellular modem connection persists.
Only used for integrated cellular modem.

Enumerationr/w

Enumerated Values:

0	notApplicable
1	disabled
2	enabled

.1.3.6.1.4.1.10418.26.2.8.2.1.30

acsModemsTableSignalQualityCheck

Check the signal quality of the integrated cellular modem. This
turns on the modem transceiver to get the signal. The signal quality can be read
in acsModemsTableSignalQualityDisplay.

Enumerationr/w

Enumerated Values:

0	notApplicable
1	no-action
2	signalCheck

.1.3.6.1.4.1.10418.26.2.8.2.1.31

acsModemsTableSignalQualityDisplay

Displays the last read signal quality of the integrated cellular modem.
To refresh this value write signalCheck(2) to acsModemsTableSignalQualityCheck.

OctetStringr/w

Constraints:
range: 0-80

.1.3.6.1.4.1.10418.26.2.8.2.1.32

acsModemsTableSIMStatus

Status of the modem SIM card. Only used for integrated cellular modem.

Enumeration

Enumerated Values:

0	unknown
1	ready
2	waitingForPIN
3	waitingForUnlockCode
4	errorReadingSIM

.1.3.6.1.4.1.10418.26.2.8.2.1.33

acsModemsTableSIMPINEntry

Modem SIM card PIN/Password entry. Writable only if acsModemsTableSIMStatus
returns waitingForPIN(2). Only used for integrated cellular modem.

OctetStringr/w

Constraints:
range: 0-80

.1.3.6.1.4.1.10418.26.2.8.2.1.34

acsModemsTableSIMUnlockCodeEntry

Modem SIM card Unlock Code entry. Writable only if acsModemsTableSIMStatus
returns waitingForUnlockCode(3). Only used for integrated cellular modem.

OctetStringr/w

Constraints:
range: 0-80

.1.3.6.1.4.1.10418.26.2.8.2.1.35

acsModemsTableCellTestLastStarted

The timestamp of the last time the Cell Modem IP Test started running.
Only used for integrated cellular modem.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10418.26.2.8.2.1.36

acsModemsTableCellTestLastResult

The result of the last time the Cell Modem IP Test was run.
Only used for integrated cellular modem.

OctetString

Constraints:
range: 0-256

.1.3.6.1.4.1.10418.26.2.8.2.1.37