ACS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
202

acsActiveSessionsTable

table
.1.3.6.1.4.1.10418.16.2.2.2 · 1 row entry · 8 columns
Open in standard view
Uses the vertiv variant from /opt/observium/mibs/vertiv.
Command help
Walk acsActiveSessionsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS-MIB::acsActiveSessionsTable' 
This table contains the list of active sessions.
acsActiveSessionsTableEntry row .1.3.6.1.4.1.10418.16.2.2.2.1
each entry has the information about the active session
Indexes
Column Syntax OID
acsActiveSessionsTableIndex
A unique index representing an entry in this table.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.10418.16.2.2.2.1.1
acsActiveSessionsTableUser
The name of the user that opens this session.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.10418.16.2.2.2.1.2
acsActiveSessionsTableGroup
The name of the group that the user belongs to.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.10418.16.2.2.2.1.3
acsActiveSessionsTableType
The session type.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.10418.16.2.2.2.1.4
acsActiveSessionsTableConnection
Connection type.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.10418.16.2.2.2.1.5
acsActiveSessionsTableSessionTime
Time of the session
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.10418.16.2.2.2.1.6
acsActiveSessionsTableFrom
The source IP address of the session.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.10418.16.2.2.2.1.7
acsActiveSessionsTableKill
A set value of killSession(2) will kill the session.
noAction(1) = always returned in a GET. Does nothing if SET.
killSession(2)= when SET the appliance immediately kills the session.
Enumerationr/w
Enumerated Values:
1noAction
2killSession
 .1.3.6.1.4.1.10418.16.2.2.2.1.8

acsSerialPortTable

table
.1.3.6.1.4.1.10418.16.2.3.2 · 1 row entry · 21 columns
Open in standard view
Uses the vertiv variant from /opt/observium/mibs/vertiv.
Command help
Walk acsSerialPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS-MIB::acsSerialPortTable' 
This table contains information about serial ports.
acsSerialPortTableEntry row .1.3.6.1.4.1.10418.16.2.3.2.1
each entry has the information about specific serial port.
Indexes
Column Syntax OID
acsSerialPortTableNumber
A unique index representing an entry in this table.
It is the number of the serial port. For AUX port,
the number will be the number of physical serial ports plus 1.
Integer32
Constraints:
range: 1-49
 .1.3.6.1.4.1.10418.16.2.3.2.1.1
acsSerialPortTableDeviceName
The associated device name for the serial port.
OctetString
Constraints:
range: 0-25
 .1.3.6.1.4.1.10418.16.2.3.2.1.2
acsSerialPortTableStatus
The status of the serial port:
disabled(1) = it was configured as disable.
idle(2) = there is not any session opened in this port.
inUse(3) = there is session(s) opened in this port.
Enumeration
Enumerated Values:
1disabled
2idle
3inUse
 .1.3.6.1.4.1.10418.16.2.3.2.1.3
acsSerialPortTableName
Name associated with this serial port.
OctetString
Constraints:
range: 0-25
 .1.3.6.1.4.1.10418.16.2.3.2.1.4
acsSerialPortTableProfile
Configured profile for this serial port.
Enumeration
Enumerated Values:
1casProfile
2tsProfile
3dialInProfile
4powerProfile
 .1.3.6.1.4.1.10418.16.2.3.2.1.5
acsSerialPortTablePinOut
RJ45 Pin-out configured for this serial port.
SerialPortPinOut
Type Values:
1cyclades
2cisco
 .1.3.6.1.4.1.10418.16.2.3.2.1.6
acsSerialPortTableComSpeed
Speed configured for this serial port.
SerialPortSpeed
Type Values:
300speed300bps
600speed600bps
1200speed1200bps
2400speed2400bps
4800speed4800bps
9600speed9600bps
19200speed19200bps
38400speed38400bps
57600speed57600bps
115200speed115200bps
230400speed230400bps
460800speed460800bps
 .1.3.6.1.4.1.10418.16.2.3.2.1.7
acsSerialPortTableComParity
Parity configured for this serial port.
Enumeration
Enumerated Values:
1none
2odd
3even
 .1.3.6.1.4.1.10418.16.2.3.2.1.8
acsSerialPortTableComDataSize
Data Size configured for this serial port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.3.2.1.9
acsSerialPortTableComStopBits
Number of Stop Bits configured for this serial port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.3.2.1.10
acsSerialPortTableComFlowControl
Flow Control configured for this serial port.
Enumeration
Enumerated Values:
1none
2hardware
3software
 .1.3.6.1.4.1.10418.16.2.3.2.1.11
acsSerialPortTableSignalStateDTR
State of the DTR RS-232C signal.
SerialPortSignalState
Type Values:
1up
2down
 .1.3.6.1.4.1.10418.16.2.3.2.1.12
acsSerialPortTableSignalStateDCD
State of the DCD RS-232C signal.
SerialPortSignalState
Type Values:
1up
2down
 .1.3.6.1.4.1.10418.16.2.3.2.1.13
acsSerialPortTableSignalStateRTS
State of the RTS RS-232C signal.
SerialPortSignalState
Type Values:
1up
2down
 .1.3.6.1.4.1.10418.16.2.3.2.1.14
acsSerialPortTableSignalStateCTS
State of the CTS RS-232C signal.
SerialPortSignalState
Type Values:
1up
2down
 .1.3.6.1.4.1.10418.16.2.3.2.1.15
acsSerialPortTableTxBytes
The number of transmited bytes by the serial port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.3.2.1.16
acsSerialPortTableRxBytes
The number of received bytes by the serial port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.3.2.1.17
acsSerialPortTableFrameError
The number of frame error detected in the serial port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.3.2.1.18
acsSerialPortTableParityError
The number of parity error detected in the serial port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.3.2.1.19
acsSerialPortTableBreak
The number of break detected in the serial port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.3.2.1.20
acsSerialPortTableOverrun
The number of overrun error detected in the serial port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.3.2.1.21

acsPowerMgmtSerialTable

table
.1.3.6.1.4.1.10418.16.2.5.2 · 1 row entry · 4 columns
Open in standard view
Uses the vertiv variant from /opt/observium/mibs/vertiv.
Command help
Walk acsPowerMgmtSerialTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS-MIB::acsPowerMgmtSerialTable' 
Information about each serial port thas has PDU connect.
acsPowerMgmtSerialTableEntry row .1.3.6.1.4.1.10418.16.2.5.2.1
Information about each serial port thas has PDU connect.
Indexes
Column Syntax OID
acsPowerMgmtSerialTableIndex
The index of the register.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10418.16.2.5.2.1.1
acsPowerMgmtSerialTablePortNumber
The number of the serial port when the PDU is connected.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.2.1.2
acsPowerMgmtSerialTableDeviceName
The device name of this serial port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.2.1.3
acsPowerMgmtSerialTableNumberPDUs
Total number of units connected in this serial port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.2.1.4

acsPowerMgmtPDUTable

table
.1.3.6.1.4.1.10418.16.2.5.3 · 1 row entry · 63 columns
Open in standard view
Uses the vertiv variant from /opt/observium/mibs/vertiv.
Command help
Walk acsPowerMgmtPDUTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS-MIB::acsPowerMgmtPDUTable' 
This table contains the list of detected PDUs.
acsPowerMgmtPDUTableEntry row .1.3.6.1.4.1.10418.16.2.5.3.1
each entry has the information about the PDU.
Indexes
Column Syntax OID
acsPowerMgmtPDUTablePortNumber
Number of serial port when the PDU is connected.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10418.16.2.5.3.1.1
acsPowerMgmtPDUTablePduIndex
A PDU position in the chain.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.10418.16.2.5.3.1.2
acsPowerMgmtPDUTablePduId
PDU identification.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.3.1.3
acsPowerMgmtPDUTablePortName
Name of serial port when the PDU is connected.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.3.1.4
acsPowerMgmtPDUTableModel
Model of the PDU.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.3.1.5
acsPowerMgmtPDUTableVendor
Vendor of the PDU.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.3.1.6
acsPowerMgmtPDUTableFirmwareVersion
Version of the PDU firmware.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.3.1.7
acsPowerMgmtPDUTableNumberOfOutlets
Number of outlets of the PDU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.8
acsPowerMgmtPDUTableCurrentNOSobsolete
Number of current sensors in the PDU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.9
acsPowerMgmtPDUTableCurrent1Valueobsolete
Current of the sensor 1 in this PDU unit in AMP.
The value of this object is the actual current in
AMP * 10. You need to translate the readed value
(Ex. : value is 5, the current is 0.5 AMP.)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.10
acsPowerMgmtPDUTableCurrent1Maxobsolete
Maximum current of the sensor 1 in this PDU unit in AMP.
When the PDU does not have support for maximum value,
the value will be 0.
The value of this object is the actual current in
AMP * 10. You need to translate the …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.11
acsPowerMgmtPDUTableCurrent2Valueobsolete
Current of the sensor 2 in this PDU unit in AMP.
The value of this object is the actual current in
AMP * 10. You need to translate the readed value
(Ex. : value is 5, the current is 0.5 AMP.)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.12
acsPowerMgmtPDUTableCurrent2Maxobsolete
Maximum current of the sensor 2 in this PDU unit in AMP.
When the PDU does not have support for maximum value,
the value will be 0.
The value of this object is the actual current in
AMP * 10. You need to translate the …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.13
acsPowerMgmtPDUTableCurrent3Valueobsolete
Current of the sensor 3 in this PDU unit in AMP.
The value of this object is the actual current in
AMP * 10. You need to translate the readed value
(Ex. : value is 5, the current is 0.5 AMP.)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.14
acsPowerMgmtPDUTableCurrent3Maxobsolete
Maximum current of the sensor 3 in this PDU unit in AMP.
When the PDU does not have support for maximum value,
the value will be 0.
The value of this object is the actual current in
AMP * 10. You need to translate the …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.15
acsPowerMgmtPDUTableTemperatureNOSobsolete
Number of temperature sensors in the PDU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.16
acsPowerMgmtPDUTableTemperature1Valueobsolete
Temperature of this PM unit in Celsius degrees.
The value of this object is the actual temperature in
degrees C * 10. You need to translate the readed value
(Ex. : value is 240, the temperature is 24 Celsius.)
If the …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.17
acsPowerMgmtPDUTableTemperature1Maxobsolete
Maximum temperature detected in this PM unit in Celsius degrees.
The value will be Zero when the PDU does not have support for maximum value.
The value of this object is the actual temperature in
degrees C * 10. You …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.18
acsPowerMgmtPDUTableTemperature2Valueobsolete
Temperature of this PM unit in Celsius degrees.
The value of this object is the actual temperature in
degrees C * 10. You need to translate the readed value
(Ex. : value is 240, the temperature is 24 Celsius.)
If the …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.19
acsPowerMgmtPDUTableTemperature2Maxobsolete
Maximum temperature detected in this PM unit in Celsius degrees.
The value will be Zero when the PDU does not have support for maximum value.
The value of this object is the actual temperature in
degrees C * 10. You ne…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.20
acsPowerMgmtPDUTableTemperature3Valueobsolete
Temperature of this PM unit in Celsius degrees.
The value of this object is the actual temperature in
degrees C * 10. You need to translate the readed value
(Ex. : value is 240, the temperature is 24 Celsius.)
If the …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.21
acsPowerMgmtPDUTableTemperature3Maxobsolete
Maximum temperature detected in this PM unit in Celsius degrees.
The value will be Zero when the PDU does not have support for maximum value.
The value of this object is the actual temperature in
degrees C * 10. You …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.22
acsPowerMgmtPDUTableHumidityNOSobsolete
Number of humidity sensors in the PDU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.23
acsPowerMgmtPDUTableHumidity1Valueobsolete
Humidity of this PM unit .
If the humidity measurement is not installed this
value will be 0.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.24
acsPowerMgmtPDUTableHumidity1Maxobsolete
Maximum humidity detected in this PM unit.
If the humidity measurement is not installed or the PDU does not have support for maximum value this
value will be 0.
Set with Zero value to clear the max. temperature.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.25
acsPowerMgmtPDUTableHumidity2Valueobsolete
Humidity of this PM unit .
If the humidity measurement is not installed this
value will be 0.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.26
acsPowerMgmtPDUTableHumidity2Maxobsolete
Maximum humidity detected in this PM unit.
If the humidity measurement is not installed or the PDU does not have support for maximum value this
value will be 0.
Set with Zero value to clear the max. temperature.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.27
acsPowerMgmtPDUTableHumidity3Valueobsolete
Humidity of this PM unit .
If the humidity measurement is not installed this
value will be 0.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.28
acsPowerMgmtPDUTableHumidity3Maxobsolete
Maximum humidity detected in this PM unit.
If the humidity measurement is not installed or the PDU does not have support for maximum value this
value will be 0.
Set with Zero value to clear the max. temperature.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.29
acsPowerMgmtPDUTableVoltageNOSobsolete
Number of voltage sensors in the PDU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.30
acsPowerMgmtPDUTableVoltage1Valueobsolete
Voltage of this sensor in this PDU unit.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.31
acsPowerMgmtPDUTableVoltage1Maxobsolete
Maximum voltage of this sensor in this PDU unit.
Set with Zero value to clear the maximum voltage.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.32
acsPowerMgmtPDUTableVoltage2Valueobsolete
Voltage of this sensor in this PDU unit.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.33
acsPowerMgmtPDUTableVoltage2Maxobsolete
Maximum voltage of this sensor in this PDU unit.
Set with Zero value to clear the maximum voltage.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.34
acsPowerMgmtPDUTableVoltage3Valueobsolete
Voltage of this sensor in this PDU unit.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.35
acsPowerMgmtPDUTableVoltage3Maxobsolete
Maximum voltage of this sensor in this PDU unit.
Set with Zero value to clear the maximum voltage.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.36
acsPowerMgmtPDUTableNumberOfPhases
Number of phases of this PDU unit.
Enumeration
Enumerated Values:
0single-phase
3three-phase
 .1.3.6.1.4.1.10418.16.2.5.3.1.37
acsPowerMgmtPDUTableNumberOfBanks
Number of banks of this PDU unit.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.38
acsPowerMgmtPDUTableCurrentValue
Actual value of current sensor in this PDU.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.39
acsPowerMgmtPDUTableCurrentMax
Max detected value of current sensor in this PDU.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.40
acsPowerMgmtPDUTableCurrentMin
Min detected value of current sensor in this PDU.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.41
acsPowerMgmtPDUTableCurrentAvg
Average value for current sensor in this PDU.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.42
acsPowerMgmtPDUTableCurrentReset
Reset max, min and avg values of current.
Enumerationr/w
Enumerated Values:
1no-action
2reset
 .1.3.6.1.4.1.10418.16.2.5.3.1.43
acsPowerMgmtPDUTableVoltageType
Type of voltage values.
Enumeration
Enumerated Values:
0none-sensor
1estimated
2read
 .1.3.6.1.4.1.10418.16.2.5.3.1.44
acsPowerMgmtPDUTableVoltageValue
Actual value of voltage sensor in this PDU unit.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.45
acsPowerMgmtPDUTableVoltageMax
Max detected value of voltage sensor in this PDU unit.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.46
acsPowerMgmtPDUTableVoltageMin
Min detected value of voltage sensor in this PDU unit.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.47
acsPowerMgmtPDUTableVoltageAvg
Average value for voltage sensor in this PDU unit.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.48
acsPowerMgmtPDUTableVoltageReset
Reset max, min and avg values of voltage.
Enumerationr/w
Enumerated Values:
1no-action
2reset
 .1.3.6.1.4.1.10418.16.2.5.3.1.49
acsPowerMgmtPDUTablePowerType
Type of power consumption values.( W x 10 )
Enumeration
Enumerated Values:
0none-sensor
1estimated
2read
 .1.3.6.1.4.1.10418.16.2.5.3.1.50
acsPowerMgmtPDUTablePowerValue
Actual value of power consumption in this PDU unit.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.51
acsPowerMgmtPDUTablePowerMax
Max detected value of power consumption in this PDU unit.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.52
acsPowerMgmtPDUTablePowerMin
Min detected value of power consumption in this PDU unit.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.53
acsPowerMgmtPDUTablePowerAvg
Average value for power consumption in this PDU unit.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.54
acsPowerMgmtPDUTablePowerReset
Reset max, min and avg values of power consumption.
Enumerationr/w
Enumerated Values:
1no-action
2reset
 .1.3.6.1.4.1.10418.16.2.5.3.1.55
acsPowerMgmtPDUTablePowerFactorType
Type of power factor values.
Enumeration
Enumerated Values:
0none-sensor
1estimated
2read
 .1.3.6.1.4.1.10418.16.2.5.3.1.56
acsPowerMgmtPDUTablePowerFactorValue
Actual value of power factor in this PDU unit.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.57
acsPowerMgmtPDUTablePowerFactorMax
Max detected value of power factor in this PDU unit.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.58
acsPowerMgmtPDUTablePowerFactorMin
Min detected value of power factor in this PDU unit.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.59
acsPowerMgmtPDUTablePowerFactorAvg
Average value for power factor in this PDU unit.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.60
acsPowerMgmtPDUTablePowerFactorReset
Reset max, min and avg values of power factor.
Enumerationr/w
Enumerated Values:
1no-action
2reset
 .1.3.6.1.4.1.10418.16.2.5.3.1.61
acsPowerMgmtPDUTableAlarm
Show the PDU alarm status.
Enumeration
Enumerated Values:
1normal
2blow-fuse
3hw-ocp
4high-critical
5high-warning
6low-warning
7low-critical
 .1.3.6.1.4.1.10418.16.2.5.3.1.62
acsPowerMgmtPDUTableEnvSensors
Number of environmental sensor in this PDU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.3.1.63

acsPowerMgmtOutletsTable

table
.1.3.6.1.4.1.10418.16.2.5.5 · 1 row entry · 8 columns
Open in standard view
Uses the vertiv variant from /opt/observium/mibs/vertiv.
Command help
Walk acsPowerMgmtOutletsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS-MIB::acsPowerMgmtOutletsTable' 
This table contains the information about outlets.
acsPowerMgmtOutletsTableEntry row .1.3.6.1.4.1.10418.16.2.5.5.1
each entry has the information about the outlet.
Indexes
Column Syntax OID
acsPowerMgmtOutletsTablePortNumber
Serial Port number.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10418.16.2.5.5.1.1
acsPowerMgmtOutletsTablePduNumber
Index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10418.16.2.5.5.1.2
acsPowerMgmtOutletsTableNumber
Number of the outlet in the PDU.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10418.16.2.5.5.1.3
acsPowerMgmtOutletsTableName
Name of the outlet.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.5.1.4
acsPowerMgmtOutletsTableStatus
Status of the outlet.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.10418.16.2.5.5.1.5
acsPowerMgmtOutletsTablePowerControl
A set value of power*(2-6) will send command to PDU.
noAction(1) = always returned in a GET. Does nothing if SET.
powerOn(2) = when SET the power On command is sent to PDU.
powerOff(3) = when SET the power Off command …
Enumerationr/w
Enumerated Values:
1noAction
2powerOn
3powerOff
4powerCycle
5powerLock
6powerUnlock
 .1.3.6.1.4.1.10418.16.2.5.5.1.6
acsPowerMgmtOutletsTablePortName
Serial Port Name where the PDU is connected.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.5.1.7
acsPowerMgmtOutletsTablePduId
PDU identification.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.5.1.8

acsPowerMgmtGroupTable

table
.1.3.6.1.4.1.10418.16.2.5.7 · 1 row entry · 4 columns
Open in standard view
Uses the vertiv variant from /opt/observium/mibs/vertiv.
Command help
Walk acsPowerMgmtGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS-MIB::acsPowerMgmtGroupTable' 
This table contains the information about group of outlets.
acsPowerMgmtGroupTableEntry row .1.3.6.1.4.1.10418.16.2.5.7.1
each entry has the information about group of outlets.
Indexes
Column Syntax OID
acsPowerMgmtGroupTableIndex
Index of the group.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.10418.16.2.5.7.1.1
acsPowerMgmtGroupTableName
Name of the group of outlets.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.7.1.2
acsPowerMgmtGroupTableStatus
Status of the group of outlet.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.10418.16.2.5.7.1.3
acsPowerMgmtGroupTablePowerControl
A set value of power*(2-6) will send command to PDU.
noAction(1) = always returned in a GET. Does nothing if SET.
powerOn(2) = when SET the power On command is sent to PDU.
powerOff(3) = when SET the power Off command …
Enumerationr/w
Enumerated Values:
1noAction
2powerOn
3powerOff
4powerCycle
 .1.3.6.1.4.1.10418.16.2.5.7.1.4

acsPowerMgmtPhasesTable

table
.1.3.6.1.4.1.10418.16.2.5.8 · 1 row entry · 30 columns
Open in standard view
Uses the vertiv variant from /opt/observium/mibs/vertiv.
Command help
Walk acsPowerMgmtPhasesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS-MIB::acsPowerMgmtPhasesTable' 
This table contains data monitoring of each detected phase.
acsPowerMgmtPhasesTableEntry row .1.3.6.1.4.1.10418.16.2.5.8.1
each entry has the data monitoring about phases.
Indexes
Column Syntax OID
acsPowerMgmtPhasesTablePortNumber
Number of serial port when the PDU is connected.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10418.16.2.5.8.1.1
acsPowerMgmtPhasesTablePduIndex
A PDU position in the chain.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.10418.16.2.5.8.1.2
acsPowerMgmtPhasesTablePhaseIndex
phase index in the PDU.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.10418.16.2.5.8.1.3
acsPowerMgmtPhasesTablePhaseName
phase name in the PDU.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.8.1.4
acsPowerMgmtPhasesTablePduId
PDU identification.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.8.1.5
acsPowerMgmtPhasesTablePortName
Name of serial port when the PDU is connected.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.8.1.6
acsPowerMgmtPhasesTableCurrentValue
Actual value of current sensor in this phase.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.8.1.7
acsPowerMgmtPhasesTableCurrentMax
Max detected value of current sensor in this phase.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.8.1.8
acsPowerMgmtPhasesTableCurrentMin
Min detected value of current sensor in this phase.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.8.1.9
acsPowerMgmtPhasesTableCurrentAvg
Average value for current sensor in this phase.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.8.1.10
acsPowerMgmtPhasesTableCurrentReset
Reset max, min and avg values of current.
Enumerationr/w
Enumerated Values:
1no-action
2reset
 .1.3.6.1.4.1.10418.16.2.5.8.1.11
acsPowerMgmtPhasesTableVoltageType
Type of voltage values.
Enumeration
Enumerated Values:
0none-sensor
1estimated
2read
 .1.3.6.1.4.1.10418.16.2.5.8.1.12
acsPowerMgmtPhasesTableVoltageValue
Actual value of voltage sensor in this phase.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.8.1.13
acsPowerMgmtPhasesTableVoltageMax
Max detected value of voltage sensor in this phase.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.8.1.14
acsPowerMgmtPhasesTableVoltageMin
Min detected value of voltage sensor in this phase.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.8.1.15
acsPowerMgmtPhasesTableVoltageAvg
Average value for voltage sensor in this phase.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.8.1.16
acsPowerMgmtPhasesTableVoltageReset
Reset max, min and avg values of voltage.
Enumerationr/w
Enumerated Values:
1no-action
2reset
Constraints:
range: 1500-3000
 .1.3.6.1.4.1.10418.16.2.5.8.1.17
acsPowerMgmtPhasesTablePowerType
Type of power consumption values.
Enumeration
Enumerated Values:
0none-sensor
1estimated
2read
Constraints:
range: 0-1500
 .1.3.6.1.4.1.10418.16.2.5.8.1.18
acsPowerMgmtPhasesTablePowerValue
Actual value of power consumption in this phase.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.8.1.19
acsPowerMgmtPhasesTablePowerMax
Max detected value of power consumption in this phase.( W x 10 )
SNMPv2-SMIInteger32
Constraints:
range: 0-50
 .1.3.6.1.4.1.10418.16.2.5.8.1.20
acsPowerMgmtPhasesTablePowerMin
Min detected value of power consumption in this phase.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.8.1.21
acsPowerMgmtPhasesTablePowerAvg
Average value for power consumption in this phase.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.8.1.22
acsPowerMgmtPhasesTablePowerReset
Reset max, min and avg values of power consumption.
Enumerationr/w
Enumerated Values:
1no-action
2reset
Constraints:
range: 1500-3000
 .1.3.6.1.4.1.10418.16.2.5.8.1.23
acsPowerMgmtPhasesTablePowerFactorType
Type of power factor values.
Enumeration
Enumerated Values:
0none-sensor
1estimated
2read
Constraints:
range: 0-1500
 .1.3.6.1.4.1.10418.16.2.5.8.1.24
acsPowerMgmtPhasesTablePowerFactorValue
Actual value of power factor in this phase.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.8.1.25
acsPowerMgmtPhasesTablePowerFactorMax
Max detected value of power factor in this phase.( PF x 100 )
SNMPv2-SMIInteger32
Constraints:
range: 0-50
 .1.3.6.1.4.1.10418.16.2.5.8.1.26
acsPowerMgmtPhasesTablePowerFactorMin
Min detected value of power factor in this phase.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.8.1.27
acsPowerMgmtPhasesTablePowerFactorAvg
Average value for power factor in this phase.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.8.1.28
acsPowerMgmtPhasesTablePowerFactorReset
Reset max, min and avg values of power factor.
Enumerationr/w
Enumerated Values:
1no-action
2reset
 .1.3.6.1.4.1.10418.16.2.5.8.1.29
acsPowerMgmtPhasesTableAlarm
Show the phase alarm status.
Enumeration
Enumerated Values:
1normal
2blow-fuse
3hw-ocp
4high-critical
5high-warning
6low-warning
7low-critical
 .1.3.6.1.4.1.10418.16.2.5.8.1.30

acsPowerMgmtBanksTable

table
.1.3.6.1.4.1.10418.16.2.5.9 · 1 row entry · 30 columns
Open in standard view
Uses the vertiv variant from /opt/observium/mibs/vertiv.
Command help
Walk acsPowerMgmtBanksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS-MIB::acsPowerMgmtBanksTable' 
This table contains data monitoring of each detected bank.
acsPowerMgmtBanksTableEntry row .1.3.6.1.4.1.10418.16.2.5.9.1
each entry has the data monitoring about bank.
Indexes
Column Syntax OID
acsPowerMgmtBanksTablePortNumber
Number of serial port when the PDU is connected.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10418.16.2.5.9.1.1
acsPowerMgmtBanksTablePduIndex
A PDU position in the chain.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.10418.16.2.5.9.1.2
acsPowerMgmtBanksTableBankIndex
Bank index in the PDU.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.10418.16.2.5.9.1.3
acsPowerMgmtBanksTableBankName
Bank name in the PDU.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.9.1.4
acsPowerMgmtBanksTablePduId
PDU identification.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.9.1.5
acsPowerMgmtBanksTablePortName
Name of serial port when the PDU is connected.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.9.1.6
acsPowerMgmtBanksTableCurrentValue
Actual value of current sensor in this bank.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.7
acsPowerMgmtBanksTableCurrentMax
Max detected value of current sensor in this bank.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.8
acsPowerMgmtBanksTableCurrentMin
Min detected value of current sensor in this bank.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.9
acsPowerMgmtBanksTableCurrentAvg
Average value for current sensor in this bank.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.10
acsPowerMgmtBanksTableCurrentReset
Reset max, min and avg values of current.
Enumerationr/w
Enumerated Values:
1no-action
2reset
 .1.3.6.1.4.1.10418.16.2.5.9.1.11
acsPowerMgmtBanksTableVoltageType
Type of voltage values.
Enumeration
Enumerated Values:
0none-sensor
1estimated
2read
 .1.3.6.1.4.1.10418.16.2.5.9.1.12
acsPowerMgmtBanksTableVoltageValue
Actual value of voltage sensor in this bank.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.13
acsPowerMgmtBanksTableVoltageMax
Max detected value of voltage sensor in this bank.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.14
acsPowerMgmtBanksTableVoltageMin
Min detected value of voltage sensor in this bank.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.15
acsPowerMgmtBanksTableVoltageAvg
Average value for voltage sensor in this bank.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.16
acsPowerMgmtBanksTableVoltageReset
Reset max, min and avg values of voltage.
Enumerationr/w
Enumerated Values:
1no-action
2reset
 .1.3.6.1.4.1.10418.16.2.5.9.1.17
acsPowerMgmtBanksTablePowerType
Type of power consumption values.
Enumeration
Enumerated Values:
0none-sensor
1estimated
2read
 .1.3.6.1.4.1.10418.16.2.5.9.1.18
acsPowerMgmtBanksTablePowerValue
Actual value of power consumption in this bank.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.19
acsPowerMgmtBanksTablePowerMax
Max detected value of power consumption in this bank.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.20
acsPowerMgmtBanksTablePowerMin
Min detected value of power consumption in this bank.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.21
acsPowerMgmtBanksTablePowerAvg
Average value for power consumption in this bank.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.22
acsPowerMgmtBanksTablePowerReset
Reset max, min and avg values of power consumption.
Enumerationr/w
Enumerated Values:
1no-action
2reset
 .1.3.6.1.4.1.10418.16.2.5.9.1.23
acsPowerMgmtBanksTablePowerFactorType
Type of power factor values.
Enumeration
Enumerated Values:
0none-sensor
1estimated
2read
 .1.3.6.1.4.1.10418.16.2.5.9.1.24
acsPowerMgmtBanksTablePowerFactorValue
Actual value of power factor in this bank.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.25
acsPowerMgmtBanksTablePowerFactorMax
Max detected value of power factor in this bank.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.26
acsPowerMgmtBanksTablePowerFactorMin
Min detected value of power factor in this bank.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.27
acsPowerMgmtBanksTablePowerFactorAvg
Average value for power factor in this bank.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.9.1.28
acsPowerMgmtBanksTablePowerFactorReset
Reset max, min and avg values of power factor.
Enumerationr/w
Enumerated Values:
1no-action
2reset
 .1.3.6.1.4.1.10418.16.2.5.9.1.29
acsPowerMgmtBanksTableAlarm
Show the bank alarm status.
Enumeration
Enumerated Values:
1normal
2blow-fuse
3hw-ocp
4high-critical
5high-warning
6low-warning
7low-critical
 .1.3.6.1.4.1.10418.16.2.5.9.1.30

acsPowerMgmtEnvMonTable

table
.1.3.6.1.4.1.10418.16.2.5.10 · 1 row entry · 10 columns
Open in standard view
Uses the vertiv variant from /opt/observium/mibs/vertiv.
Command help
Walk acsPowerMgmtEnvMonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS-MIB::acsPowerMgmtEnvMonTable' 
This table contains data monitoring of each detected environmental sensor.
acsPowerMgmtEnvMonTableEntry row .1.3.6.1.4.1.10418.16.2.5.10.1
each entry has the data monitoring about environmental sensors.
Indexes
Column Syntax OID
acsPowerMgmtEnvMonTablePortNumber
Number of serial port when the PDU is connected.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10418.16.2.5.10.1.1
acsPowerMgmtEnvMonTablePduIndex
A PDU position in the chain.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.10418.16.2.5.10.1.2
acsPowerMgmtEnvMonTableIndex
envmon sensor index.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.10418.16.2.5.10.1.3
acsPowerMgmtEnvMonTableName
envmon sensor name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.10.1.4
acsPowerMgmtEnvMonTablePduId
PDU identification.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.10.1.5
acsPowerMgmtEnvMonTablePortName
Name of serial port when the PDU is connected.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10418.16.2.5.10.1.6
acsPowerMgmtEnvMonTableType
The type of environmental monitor.
Enumeration
Enumerated Values:
1temp-internal
2temperature
3humidity
4air-flow
5smoke
6dry-concact
7water-level
8motion
9unplugged
10unknown
 .1.3.6.1.4.1.10418.16.2.5.10.1.7
acsPowerMgmtEnvMonTableStatus
Status of digital sensors:
Dry-Contact, Water level, Smoke sensor, Motion sensor.
Enumeration
Enumerated Values:
1normal
2triggered
3not-applicable
 .1.3.6.1.4.1.10418.16.2.5.10.1.8
acsPowerMgmtEnvMonTableValue
Detected value for envmon sensors. Temperature: C x 10. Humidity: %. Air flow: afu.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.10.1.9
acsPowerMgmtEnvMonTableMaxValue
Max detected value for envmon sensors. Temperature: C x 10. Humidity: %. Air flow: afu.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.10.1.10

acsPowerMgmtOutElecMonTable

table
.1.3.6.1.4.1.10418.16.2.5.11 · 1 row entry · 24 columns
Open in standard view
Uses the vertiv variant from /opt/observium/mibs/vertiv.
Command help
Walk acsPowerMgmtOutElecMonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACS-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACS-MIB::acsPowerMgmtOutElecMonTable' 
This table contains the information about data monitoring of outlets.
acsPowerMgmtOutElecMonTableEntry row .1.3.6.1.4.1.10418.16.2.5.11.1
each entry has the information about the outlet.
Indexes
Column Syntax OID
acsPowerMgmtOutElecMonTablePortNumber
Serial Port number.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10418.16.2.5.11.1.1
acsPowerMgmtOutElecMonTablePduNumber
Index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10418.16.2.5.11.1.2
acsPowerMgmtOutElecMonTableNumber
Number of the outlet in the PDU.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10418.16.2.5.11.1.3
acsPowerMgmtOutElecMonTableCurrentValue
Actual value of outlet current sensor.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.4
acsPowerMgmtOutElecMonTableCurrentMax
Max detected value of outlet current sensor.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.5
acsPowerMgmtOutElecMonTableCurrentMin
Min detected value of outlet current sensor.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.6
acsPowerMgmtOutElecMonTableCurrentAvg
Average value for outlet current sensor.( A x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.7
acsPowerMgmtOutElecMonTableCurrentReset
Reset max, min and avertage values of outlet current.
Enumerationr/w
Enumerated Values:
1noAction
2reset
 .1.3.6.1.4.1.10418.16.2.5.11.1.8
acsPowerMgmtOutElecMonTablePowerValue
Actual value of outlet power comsumption sensor.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.9
acsPowerMgmtOutElecMonTablePowerMax
Max detected value of outlet power comsumption sensor.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.10
acsPowerMgmtOutElecMonTablePowerMin
Min detected value of outlet power comsumption sensor.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.11
acsPowerMgmtOutElecMonTablePowerAvg
Average value for outlet power comsumption sensor.( W x 10 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.12
acsPowerMgmtOutElecMonTablePowerReset
Reset max, min and avertage values of outlet power comsumption.
Enumerationr/w
Enumerated Values:
1noAction
2reset
 .1.3.6.1.4.1.10418.16.2.5.11.1.13
acsPowerMgmtOutElecMonTableVoltageValue
Actual value of outlet voltage sensor.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.14
acsPowerMgmtOutElecMonTableVoltageMax
Max detected value of outlet voltage sensor.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.15
acsPowerMgmtOutElecMonTableVoltageMin
Min detected value of outlet voltage sensor.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.16
acsPowerMgmtOutElecMonTableVoltageAvg
Average value for outlet voltage sensor.( V )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.17
acsPowerMgmtOutElecMonTableVoltageReset
Reset max, min and avertage values of outlet voltage.
Enumerationr/w
Enumerated Values:
1noAction
2reset
 .1.3.6.1.4.1.10418.16.2.5.11.1.18
acsPowerMgmtOutElecMonTablePowerFactorValue
Actual value of outlet power-factor sensor.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.19
acsPowerMgmtOutElecMonTablePowerFactorMax
Max detected value of outlet power-factor sensor.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.20
acsPowerMgmtOutElecMonTablePowerFactorMin
Min detected value of outlet power-factor sensor.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.21
acsPowerMgmtOutElecMonTablePowerFactorAvg
Average value for outlet power-factor sensor.( PF x 100 )
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10418.16.2.5.11.1.22
acsPowerMgmtOutElecMonTablePowerFactorReset
Reset max, min and avertage values of outlet power-factor.
Enumerationr/w
Enumerated Values:
1noAction
2reset
 .1.3.6.1.4.1.10418.16.2.5.11.1.23
acsPowerMgmtOutElecMonTableAlarm
Show the outlet alarm status.
Enumeration
Enumerated Values:
1normal
2blow-fuse
3hw-ocp
4high-critical
5high-warning
6low-warning
7low-critical
 .1.3.6.1.4.1.10418.16.2.5.11.1.24