A3Com-System-r8-MIB Table View

This table contains information about the
chips that are used in the CPU board of the 
system.

a3sysChipEntry row .1.3.6.1.4.1.43.2.13.2.1.1

Each entry in this table contains information
about one of the chips installed in the CPU
module.

Indexes

a3sysChipSlotIndex a3sysChipIndex

Column	Syntax	OID
a3sysChipSlotIndexmandatory This identifies a specific slot (and hence, a specific board). All the Chips described with this index are located on a single board.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.13.2.1.1.1
a3sysChipIndexmandatory This identifies a specific chip on the board identified by a3sysChipSlotIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.13.2.1.1.2
a3sysChipNamemandatory This provides a readable name for the chip.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.2.13.2.1.1.3
a3sysChipDescrmandatory This provides general information about the chip, including its part number and revision number.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.2.13.2.1.1.4

This table contains information about the
system's memory configurations.

a3sysMemEntry row .1.3.6.1.4.1.43.2.13.3.1.1

Each entry in this table contains information
about a specific memory component. The
information includes the memory type, its
starting address and its size.

Indexes

a3sysMemSlotIndex a3sysMemIndex

Column	Syntax	OID
a3sysMemSlotIndexmandatory This identifies the slot (and hence the board) that supports the memory elements identified by this entry in the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.13.3.1.1.1
a3sysMemIndexmandatory The index into this table. Each memory component is identified by a unique value of this object. This is specific to the board identified by a3sysMemSlotIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.13.3.1.1.2
a3sysMemTypemandatory This object identifies the type of the memory component.	Enumeration Enumerated Values: 1 other 2 ram-instruction 3 ram-data 4 ram-shared 5 rom-fprom 6 rom-eeprom 7 ram-total	.1.3.6.1.4.1.43.2.13.3.1.1.3
a3sysMemStartAddmandatory The starting address of the memory component.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.13.3.1.1.4
a3sysMemSizemandatory The size of the memory component, in bytes.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.13.3.1.1.5

A table that contains information about the IO boards 
in this system.

a3sysBrdEntry row .1.3.6.1.4.1.43.2.13.4.2.1

A list of information for each IO board in the
system.

Indexes

a3sysSlotIndex

Column	Syntax	OID
a3sysSlotIndexmandatory The slot number which this board occupies.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.13.4.2.1.1
a3sysBrdDescrmandatory This contains general information about the Board, including the model type, the serial number, and manufacturing information.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.2.13.4.2.1.2
a3sysBrdPathCapacitymandatory The number of physical ports supported by this board.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.13.4.2.1.3
a3sysBrdOIDmandatory The Object Identifier assigned to this Board.	ObjectIdentifier	.1.3.6.1.4.1.43.2.13.4.2.1.4
a3sysBrdResetmandatory When this object is set to reset(2), the IO board in the slot specified by this instance identifier of this object is reset. If a GET request is sent for the value of this object, other(1) is returned.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.43.2.13.4.2.1.5
a3sysBrdFwVersmandatory This object returns the version of the firmware that is running on this network interface board. A list of all the OIDs assigned to 3Com router firmware can be ftp'd from ftp.3com.com.	ObjectIdentifier	.1.3.6.1.4.1.43.2.13.4.2.1.6

This table contains all the community strings
known to the SNMP agent.

a3sysSNMPCommEntry row .1.3.6.1.4.1.43.2.13.7.5.1

Each entry in the table contains information
about a single community string.

Indexes

a3sysSNMPCommString

Column	Syntax	OID
a3sysSNMPCommStringmandatory This identifies a specific community string.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.43.2.13.7.5.1.1
a3sysSNMPCommAccessmandatory This identifies the level of access allowed for this community string.	Enumerationr/w Enumerated Values: 1 readOnly 2 readWrite	.1.3.6.1.4.1.43.2.13.7.5.1.2
a3sysSNMPCommTrapmandatory This specifies which traps get sent to the managers specified by this community string.	Enumerationr/w Enumerated Values: 1 genericOnly 2 authenOnly 3 allTraps 4 noTraps	.1.3.6.1.4.1.43.2.13.7.5.1.3
a3sysSNMPCommStatusmandatory This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.2.13.7.5.1.4

This table contains the Managers that
are allowed to use the community strings
identified in a3sysSNMPCommTable.  Each
Manager is identified by its IP address.

a3sysSNMPMgrEntry row .1.3.6.1.4.1.43.2.13.7.6.1

Each entry identifies a single Manager,
community string pair.

Indexes

a3sysSNMPMgrCommString a3sysSNMPMgrAddress

Column	Syntax	OID
a3sysSNMPMgrCommStringmandatory This identifies a specific community string.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.43.2.13.7.6.1.1
a3sysSNMPMgrAddressmandatory This identifies a single Management station that is allowed to use the community string associated with this entry. The set of all entries with same value of a3sysSNMPMgrCommString identifies all the Managers that are …	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.2.13.7.6.1.2
a3sysSNMPMgrMaskmandatory This object can be used to mask part of the IP address specified by a3sysSNMPMgrAddress. The use of this mask can then be used to identify a range of addresses that are allowed to use this community string.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.2.13.7.6.1.3
a3sysSNMPMgrStatusmandatory This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB for specific instructions on how to do this.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.2.13.7.6.1.4

This table contains the IP addresses that
are allowed to use Telnet to access to
 the NetBuilder in the TelnetManager table.

a3sysTelnetMgrEntry row .1.3.6.1.4.1.43.2.13.7.7.1

Each entry identifies a single Manager,
community string pair.

Indexes

a3sysTelnetMgrAddress

Column	Syntax	OID
a3sysTelnetMgrAddressmandatory This identifies a single Management station that is allowed to use the Telnet to manage the NetBuilder. Maximally, six (6) IP addresses can be configured in each NB.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.2.13.7.7.1.1
a3sysTelnetMgrStatusmandatory This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB for specific instructions on how to do this.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.2.13.7.7.1.2

This table contains the system's passwords.

a3sysPasswordEntry row .1.3.6.1.4.1.43.2.13.7.8.1

Each entry identifies a single system password.

Indexes

a3sysUserName a3sysOldPassword

Column	Syntax	OID
a3sysPwStatusmandatory User Status. `invalid' is used to indicate this user is no longer allowed to access this device, and the table entry may subsequently be re-used. Note that the Status of default Users cannot be set to invalid.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.43.2.13.7.8.1.1
a3sysUserNamemandatory An ASCII string for the User Name. Empty strings are not allowed. The index column for the User Table. There are two default users defined, 'root' and 'user'.	OctetString Constraints: range: 1-10	.1.3.6.1.4.1.43.2.13.7.8.1.2
a3sysUserLevelmandatory User Access Level defining the scope of management allowed for this user. Note that the access level of default Users cannot be changed.	Enumerationr/w Enumerated Values: 1 monitor 2 secureMonitor 3 manager 4 specialist 5 security	.1.3.6.1.4.1.43.2.13.7.8.1.3
a3sysOldPasswordmandatory The current password.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.2.13.7.8.1.4
a3sysNewPasswordmandatory The new password.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.43.2.13.7.8.1.5

This table defines a list of boot sources (and for the 
NetBuilder Remote Office -- memory dump destinations).  
          
There are two other parameters that dictate how the
contents of this table are used.  These parameters
are represented by a3sysStartUpAction and a3sysBootSources.
          
a3sysStartUpAction specifies what this system does when it
first comes up. If a3sysStartUpAction is set to userListOnce (2), 
the system will make a single attempt to use the entries in 
this table to identify how it should boot.  If a3sysStartUpAction
is set to userListForever (3), the system will make repeated
attempts at using the entries in this table.
          
If a3sysStartUpAction indicates that the system is to use this
table, the order in which the entries are used is dictated by 
a3sysBootSources.  If a3sysBootSources has the value primary (1),
the system will attempt to boot only from the source identified by
entry 1 in this table.  If a3sysBootSources has the value
primaryAndSecondary(2), the system will attempt to boot first
from the source identified by entry 1, and, if that source fails,
the system will try the source identified by entry 2 (the secondary
source).  If a3sysBootSources has the value testWithPrimaryBackup(3),
the system will perform a test boot using the test boot source.  Note,
for the NetBuilder Remote Office, this is the third entry (test) in this
table.  For the NetBuilder II and the NetBuilder I family( NetBuilder Local,
NetBuilder Remote, NetBuilder RemoteAccess, and NetBuilder RemoteControl),
the test boot source is identified by entry 2 (secondary) in this table.
If the test boot source fails (see the Reference Guide for more details
on test booting), the system will revert back to the source identified
by entry 1 (primary) in this table.
          
The NetBuilder Remote Office supports a fourth entry in this table,
which identifies where over the network memory is to be dumped in the
case of a system crash.  Note, the destination device (a3sysUblDevice)
must be set to network (3), in this case.  Also note that many
of the columns in this row will be irrelevant and won't affect
where the memory gets dumped.
          
Note, all entries in this table apply only to future
boots.  They don't necessarily provide information
about previous boots.

a3sysUserBootListEntry row .1.3.6.1.4.1.43.2.13.10.9.1

Each entry in this table contains a single boot source.

Indexes

a3sysUblSource

Column	Syntax	OID
a3sysUblSourcemandatory This identifies the entry number in this table. Currently, the table is limited to two entries. The first entry is labelled primary(1), the next has the label secondary(2). The NetBuilder RemoteOffice and…	Enumeration Enumerated Values: 1 primary 2 secondary 3 test 4 dump	.1.3.6.1.4.1.43.2.13.10.9.1.1
a3sysUblDevicemandatory This object identifies the source from which the system attempts to boot. If this object is set to localMediaA(1), the system will attempt to boot from drive A of the local storage media (A is the flash drive for tho…	Enumerationr/w Enumerated Values: 1 localMediaA 2 localMediaB 3 network 4 monitor 5 other 6 auto	.1.3.6.1.4.1.43.2.13.10.9.1.2
a3sysUblFileNamemandatory This specifies the path and name of the boot file. For example, to specify the file boot.29k in the root directory, this object should have the value 'boot.29k'	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.43.2.13.10.9.1.3
a3sysUblNetFileobsolete This object has been deprecated. (use a3sysUblFileName regardless of whether it's local or remote).	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.43.2.13.10.9.1.4
a3sysUblSlotmandatory This specifies the physical slot where the IO module from which the system will be booting is installed. This only applies when a3sysUblDevice is set to network(2)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.13.10.9.1.5
a3sysUblInterfacemandatory This specifies the physical port on the IO module (installed in the slot identified by a3sysUblSlot) that the system will be booting from. This only applies when a3sysUblDevice is set to network(2). If there is only …	Enumerationr/w Enumerated Values: 1 unknown 2 interfaceA 3 interfaceB	.1.3.6.1.4.1.43.2.13.10.9.1.6
a3sysUblMaxRetriesmandatory This object determines the number of times the system will try to boot from the source identified by this table entry before going to the next entry.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.43.2.13.10.9.1.7
a3sysUblConfigFileDevicemandatory This specifies the device used to access the configuration files needed by this system. If this object has the value bootDevice(1), the system will look for its configuration files on the same device as its boot files.…	Enumerationr/w Enumerated Values: 1 bootDevice 2 local 3 network 4 other	.1.3.6.1.4.1.43.2.13.10.9.1.8
a3sysUblConfigFilePathmandatory This object specifies the path to the configuration files needed by this system.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.43.2.13.10.9.1.9
a3sysUblConfigProtmandatory This object specifies the protocol to use to get the configuration files if they are stored across the network. Note, this applies only if the value of a3sysUblConfigFileDevice is network(3) or bootDevice(1). If a3sy…	Enumeration Enumerated Values: 1 fap 2 ftp 3 other	.1.3.6.1.4.1.43.2.13.10.9.1.10
a3sysUblConfigUserNamemandatory This object indicates the Username to be used by the file service protocol identified the corresponding instance of a3sysUblConfigProt.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.43.2.13.10.9.1.11
a3sysUblConfigPasswordmandatory This specifies the Password to be used by the file service protocol identified by the corresponding instance of a3sysUblConfigProt. Note, for reasons of security, the value of this object will be hidden. A string of 4 …	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.43.2.13.10.9.1.12
a3sysUblConfigAcctmandatory This specifies the Account Name used by the file service protocol. Note, for reasons of security, the value of this object will be hidden. A string of 4 stars (*) will be returned in response to any GET or GETNEXT requ…	OctetStringr/w Constraints: range: 0-30	.1.3.6.1.4.1.43.2.13.10.9.1.13
a3sysUblMacAddressmandatory The MAC address to be used for booting over the network. This can be configured to use either the MAC address assigned to the CPU module or the MAC address assigned to the I/O module over which the boot is being perfor…	Enumerationr/w Enumerated Values: 1 cpu-module 2 io-module 3 other	.1.3.6.1.4.1.43.2.13.10.9.1.14
a3sysUblCanonicalFlagmandatory This controls the format of addresses within ARP packets sent by this system.	Enumerationr/w Enumerated Values: 1 other 2 canonical 3 nonCanonical	.1.3.6.1.4.1.43.2.13.10.9.1.15
a3sysUblRemoteProtmandatory This object specifies which serial link protocol to use if a3sysUblSlot identifies a slot with a High Speed Serial board. If this is set to auto (4), the system will try all supported protocols until the serial line i…	Enumerationr/w Enumerated Values: 1 notApplicable 2 ppp 3 frameRelay 4 auto	.1.3.6.1.4.1.43.2.13.10.9.1.16
a3sysUblBaudRatemandatory This object specifies the serial line or Token Ring baud rate. For all other types of ports, this object will be ignored.	Enumerationr/w Enumerated Values: 1 unknown 2 bps9600 3 kbps19 4 kbps38 5 kbps56 6 kbps64 7 kbps128 8 kbps256 9 kbps448 10 kbps1536 11 kbps2048 12 mbps4 13 mbps16	.1.3.6.1.4.1.43.2.13.10.9.1.17
a3sysUblClockSourcemandatory This specifies whether to use an internal or external clock source. This applies only to High Speed Serial ports.	Enumerationr/w Enumerated Values: 1 internal 2 external 3 unknown	.1.3.6.1.4.1.43.2.13.10.9.1.18
a3sysUblConnectorTypemandatory This object specifies the serial line connector type.	Enumerationr/w Enumerated Values: 1 unknown 2 rs232 3 v35	.1.3.6.1.4.1.43.2.13.10.9.1.19
a3sysUblWanAddressmandatory This specifies a string to initiate a WAN connection. The specified string required is interface and protocol specific. The maximum string length is 80 bytes. Note, this applies only to High Speed Serial ports.	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.43.2.13.10.9.1.20
a3sysUblClientIpAddrmandatory The IP Address of this system used in packets when booting over the network.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.2.13.10.9.1.21
a3sysUblServerIpAddrmandatory The IP address of the Boot Server.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.2.13.10.9.1.22
a3sysUblGwIpAddrmandatory The IP address of the gateway that will forward packets to the Boot Server.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.2.13.10.9.1.23
a3sysUblConfigFileIpAddrmandatory The IP address of the configuration files Server, if needed.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.2.13.10.9.1.24
a3sysUblIpMaskmandatory The mask to be applied to the addresses specified above.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.2.13.10.9.1.25
a3sysUblAddressDiscoverymandatory This specifies the address discovery protocol to use for booting from the network. If configAddr(3) is specified, then the configured addresses are used. If nothing has been specified, other(1) is returned.	Enumerationr/w Enumerated Values: 1 other 2 bootp 3 configAddr 4 bootpRarp 5 rarp 6 rarpBootp	.1.3.6.1.4.1.43.2.13.10.9.1.26
a3sysUblPasswordmandatory This is needed when booting over a port that uses a protocol that requires a password, e.g, PPP.	OctetStringr/w Constraints: range: 0-5	.1.3.6.1.4.1.43.2.13.10.9.1.27

This table specifies where each IIO card
obtains its boot image.

a3sysIioBootEntry row .1.3.6.1.4.1.43.2.13.10.10.1

Each entry in this table corresponds to a
specific slot in the NetBuilder chassis. If
an IIO board is in that slot, that entry
determines where that IIO board obtains its
boot image.

Indexes

a3sysIioBootSlot

Column	Syntax	OID
a3sysIioBootSlotmandatory This object specifies the slot into which the IIO board corresponding to this entry is placed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.13.10.10.1.1
a3sysIioBootFileNamemandatory This object specifies the path and name of the IIO board's boot image. If the value of this object specifies a drive, the path is assumed to start from root. If the value of this object does not specify a drive num…	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.43.2.13.10.10.1.2
a3sysIioBootStatemandatory This object provides the current state of the IIO card installed in this slot. If there is no IIO card in the slot, this object will have the value empty(1). If the card is up and running, this object will have the va…	Enumeration Enumerated Values: 1 empty 2 up 3 booting 4 recovering 5 dumping 6 halted 7 selfTestFail 8 error	.1.3.6.1.4.1.43.2.13.10.10.1.3
a3sysIioBootTimemandatory The value of sysUpTime when the IIO board last went into the UP state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.13.10.10.1.4
a3sysIioBootImagemandatory The OID assigned to this version of Iio Software.	ObjectIdentifier	.1.3.6.1.4.1.43.2.13.10.10.1.5

This table contains a listing of all the files in a
specific directory on one of the systems disks.  The
directory and disk are identified by a3sysDfPath.
Each entry in this table contains information about
a single file.

a3sysDfEntry row .1.3.6.1.4.1.43.2.13.12.9.3.1

Each entry in this table describes a single disk file.

Indexes

a3sysDfName

Column	Syntax	OID
a3sysDfNamemandatory This contains the name of a single file on the disk.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.43.2.13.12.9.3.1.1
a3sysDfDirmandatory This specifies whether the file identified by the corresponding instance of a3sysDfName is a regular file or a directory.	Enumeration Enumerated Values: 1 file 2 directory	.1.3.6.1.4.1.43.2.13.12.9.3.1.2

This table specifies the recovery procedure
for each Intelligent IO board in the system.
This also specifies the recovery procedure
for the CEC card.  Note, the eeprom version
must be 5 or greater for this table to operate
properly.

a3sysIioRecoveryEntry row .1.3.6.1.4.1.43.2.13.13.1.1

Each entry in this table corresponds to a
specific slot in the NetBuilder chassis. If
an IIO board is in that slot, that entry
determines the action taken by that IIO
board in the event it crashes. There is also
an en…

Indexes

a3sysIioRecoverySlot

Column	Syntax	OID
a3sysIioRecoverySlotmandatory This object specifies the slot into which the IIO (or CEC) board corresponding to this entry is placed.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.43.2.13.13.1.1.1
a3sysIioRecoveryProceduremandatory The value of this object determines the action taken if the IIO (or CEC) crashes. If the value of this object is selectiveDumpAndReboot (5), the value of a3sysIioRecoverySelect determines which IIO (or CEC) boards will…	Enumerationr/w Enumerated Values: 1 halt 2 haltSystem 3 reboot 4 rebootSystem 5 dumpAndReboot 6 selectiveDumpAndReboot	.1.3.6.1.4.1.43.2.13.13.1.1.2
a3sysIioRecoverySelectmandatory This object specifies the IIO or CEC boards that will dump and reboot in the event this IIO or CEC board crashes. This object is relevant only if the value of a3sysIioRecoveryProcedure is selectiveDumpAndReboot (6). …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.13.13.1.1.3