A3Com-Mip-r1-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
12

a3ComMipPortTable

table mandatory
.1.3.6.1.4.1.43.2.27.2.1 · 1 row entry · 5 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComMipPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3Com-Mip-r1-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3Com-Mip-r1-MIB::a3ComMipPortTable' 
This table contains entries of parameters associated with every port
or tunnel.
a3ComMipPortEntry row .1.3.6.1.4.1.43.2.27.2.1.1
Each entry contains information for a spcified port or tunnel.
Indexes
Column Syntax OID
a3ComMipPortIndexmandatory
The port number or tunnel ID of which this entry applies. The
tunnel ID starts with 1025 and end with 1056, i.e. total tunnel
number is limited to 32.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.27.2.1.1.1
a3ComMipPortQueryIntervalmandatory
This object specifies the time interval in seconds that a Host
Query message is sent to the attached subnet to request for the
local group membership. It also derives the Membership Expiration
time which is set to two t…
Integer32r/w
Constraints:
range: 5-5400
 .1.3.6.1.4.1.43.2.27.2.1.1.2
a3ComMipPortThresholdmandatory
This object specifies the minimum IP TTL required for a multicast
datagram to be forwarded to the given port or tunnel.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.43.2.27.2.1.1.3
a3ComMipPortQueriermandatory
This object specifies if the system is responsible for sending out
Host Query messages on this port. If the value is yes(1) then the
system is the designated router on the subnet this port connects to
and the system is …
Enumeration
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.43.2.27.2.1.1.4
a3ComMipPortPaceModemandatory
This object is used to control PACE mode. If set to enabled(1),
the multicast packets will be sent out with the Universal/Local bit
set, or Priority MAC. If set to disabled(2) the Universal/Local bit
is clear, or Intera…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.43.2.27.2.1.1.5

a3ComMipLocalGroupTable

table mandatory
.1.3.6.1.4.1.43.2.27.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComMipLocalGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3Com-Mip-r1-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3Com-Mip-r1-MIB::a3ComMipLocalGroupTable' 
This table contains group membership information of each attached
subnet.
a3ComMipLocalGroupEntry row .1.3.6.1.4.1.43.2.27.2.2.1
Each entry contains a group membership information associated with
a specific port.
Indexes
Column Syntax OID
a3ComMipLocalGroupPortmandatory
This object specifies the port number to which this entry applies.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.27.2.2.1.1
a3ComMipLocalGroupIpAddrmandatory
This object specifies group's address presents on the specified
port. If the port is configured as a tunnel, there will be no group
address associated with it.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.2.27.2.2.1.2
a3ComMipLocalGroupTypemandatory
This object specifies the type of local group. This object can only
be set to 'static' by SET command, and if the local group is learned
from IGMP, it is set to 'igmp'.
Enumeration
Enumerated Values:
1static
2igmp
 .1.3.6.1.4.1.43.2.27.2.2.1.3
a3ComMipLocalGroupStatusmandatory
This object is used to add and delete entries in this table. See
the definition of RowStatus for detail.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.2.27.2.2.1.4

a3ComMipSmdsGroupTable

table mandatory
.1.3.6.1.4.1.43.2.27.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComMipSmdsGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3Com-Mip-r1-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3Com-Mip-r1-MIB::a3ComMipSmdsGroupTable' 
This table contains a set of IP network address and SMDS group address
mapping.
a3ComMipSmdsGroupEntry row .1.3.6.1.4.1.43.2.27.2.3.1
Each entry contains an IP network address to SMDS group address mapping.
Indexes
Column Syntax OID
a3ComMipSmdsGroupIpAddrmandatory
This is an IP network address for which there is a corresponding
SMDS group address.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.2.27.2.3.1.1
a3ComMipSmdsGroupMediaAddrmandatory
This is the SMDS group address that corresponds to the IP network
address identified by a3ComMipSmdsGroupIpAddr.
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.43.2.27.2.3.1.2
a3ComMipSmdsGroupStatusmandatory
This object is used to add and delete entries in this table. See
the definition of RowStatus for detail.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.2.27.2.3.1.3