A3Com-DLSW-r1-MIB Table View

This table defines the transport connections
that will be initiated or accepted by this
DLSw.  Structure of masks allows wildcard
definition for a collection of transport
connections by a conceptual row.  For a
specific transport connection, there may
be multiple of conceptual rows match the
transport address.  The -best- match will
the one to determine the characteristics
of the transport connection.

dlswTConnConfigEntry row .1.3.6.1.4.1.43.2.24.2.2.1

Each conceptual row defines a collection of
transport connections.

Indexes

dlswTConnConfigIndex

Column	Syntax	OID
dlswTConnConfigIndexmandatory The index to the conceptual row of the table. Non-positive numbers are not allowed. There are objects defined that point to conceptual rows of this table with this index value. Zero is used to denote that no correspond…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.24.2.2.1.1
dlswTConnConfigTDomainmandatory The object identifier which indicates the transport domain of this conceptual row.	ObjectIdentifierr/w	.1.3.6.1.4.1.43.2.24.2.2.1.2
dlswTConnConfigLocalTAddrmandatory The local transport address for this conceptual row of the transport connection definition.	TAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.2.24.2.2.1.3
dlswTConnConfigRemoteTAddrmandatory The remote transport address. Together with the dlswTConnConfigRemoteTAddrMask, the object instance of this conceptual row identifies a collection of the transport connections that will be either initiated by this DLSw…	TAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.2.24.2.2.1.4
dlswTConnConfigLastModifyTimemandatory The value of dlswUpTime when the value of any object in this conceptual row was last changed. This value may be compared to dlswTConnOperConnectTime to determine whether values in this row are completely valid for a tr…	DlswTimeStampr/w	.1.3.6.1.4.1.43.2.24.2.2.1.5
dlswTConnConfigEntryTypemandatory The object instance signifies the type of entry in the associated conceptual row. The value of -individual- means that the entry applies to a specific partner DLSw node as identified by dlswTConnConfigRemoteTAddr and d…	Enumerationr/w Enumerated Values: 1 individual 2 global 3 group	.1.3.6.1.4.1.43.2.24.2.2.1.6
dlswTConnConfigGroupDefinitionmandatory For conceptual rows of -individual- and `global' as specified in dlswTConnConfigEntryType, the instance of this object is -0.0-. For conceptual rows of -group-, the instance points to the specific group definition.	Instancepointerr/w	.1.3.6.1.4.1.43.2.24.2.2.1.7
dlswTConnConfigSetupTypemandatory This value of the instance of a conceptual row identifies the behavior of the collection of transport connections that this conceptual row defines. The value of activePersistent, activeOnDemand and passive means this D…	Enumerationr/w Enumerated Values: 1 other 2 activePersistent 3 activeOnDemand 4 passive 5 excluded	.1.3.6.1.4.1.43.2.24.2.2.1.8
dlswTConnConfigSapListmandatory The SAP list indicates which SAPs are advertised to the transport connection defined by this conceptual row. Only SAPs with even numbers are represented, in the form of the most significant bit of the first octet repre…	OctetStringr/w Constraints: range: 16-16	.1.3.6.1.4.1.43.2.24.2.2.1.9
dlswTConnConfigAdvertiseMacNBmandatory The value of true indicates that defined local MAC addresses and NetBIOS names will be advertised to a partner node via initial and (if supported) run-time capabilities exchange messages.	Truthvaluer/w Type Values: 1 false 2 true	.1.3.6.1.4.1.43.2.24.2.2.1.10
dlswTConnConfigInitCirRecvWndwmandatory The initial circuit receive pacing window size, in the unit of SSP messages, to be used for future transport connections activated using this table row. The managed node sends this value as its initial receive pacing w…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.43.2.24.2.2.1.11
dlswTConnConfigOpensmandatory Number of times transport connections entered connected state according to the definition of this conceptual row.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.2.1.12
dlswTConnConfigRowStatusmandatory This object is used by a Management Station to create or delete the row entry in the dlswTConnConfigTable following the RowStatus textual convention. The value of notInService will be used to take a conceptual row defi…	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.2.24.2.2.1.13

A list of transport connections.   It is optional but
desirable for an implementation to keep an entry for
some period of time after the transport connection is
disconnected.  This allows a network management station
to capture additional useful information about the connection,
in particular, statistical information and the cause of the
disconnection.

dlswTConnOperEntry row .1.3.6.1.4.1.43.2.24.2.3.1

Indexes

dlswTConnOperTDomain dlswTConnOperRemoteTAddr

Column	Syntax	OID
dlswTConnOperTDomainmandatory The object identifier indicates the transport domain of this transport connection.	ObjectIdentifier	.1.3.6.1.4.1.43.2.24.2.3.1.1
dlswTConnOperLocalTAddrmandatory The local transport address for this transport connection. This value could be different from dlswTConnConfigLocalAddr, if the value of the latter were changed after this transport connection was established.	TAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.2.24.2.3.1.2
dlswTConnOperRemoteTAddrmandatory The remote transport address of this transport connection.	TAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.2.24.2.3.1.3
dlswTConnOperEntryTimemandatory The value of dlswUpTime when this transport connection conceptual row was created.	DlswTimeStamp	.1.3.6.1.4.1.43.2.24.2.3.1.4
dlswTConnOperConnectTimemandatory The value of dlswUpTime when this transport connection last entered the -connected- state. A value of zero means this transport connection has never been established.	DlswTimeStamp	.1.3.6.1.4.1.43.2.24.2.3.1.5
dlswTConnOperStatemandatory The state of this transport connection. The transport connection enters -connecting- state when DLSw makes a connection request to the transport layer. Once initial Capabilities Exchange is sent, the transport connect…	Enumerationr/w Enumerated Values: 1 connecting 2 initCapExchange 3 connected 4 quiescing 5 disconnecting 6 disconnected	.1.3.6.1.4.1.43.2.24.2.3.1.6
dlswTConnOperConfigIndexmandatory The value of dlswTConnConfigIndex of the dlswTConnConfigEntry that governs the configuration information used by this dlswTConnOperEntry. A management station can therefore normally examine both configured and operatio…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.24.2.3.1.7
dlswTConnOperFlowCntlModemandatory The flow control mechanism in use on this transport connection. This value is undetermined (1) before the mode of flow control can be established on a new tranport connection (i.e., after CapEx is sent but before Capex …	Enumeration Enumerated Values: 1 undetermined 2 pacing 3 other	.1.3.6.1.4.1.43.2.24.2.3.1.8
dlswTConnOperPartnerVersionmandatory This value identifies which version (first octet) and release (second octect) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from …	OctetString Constraints: range: 0-2	.1.3.6.1.4.1.43.2.24.2.3.1.9
dlswTConnOperPartnerVendorIDmandatory This value identifies the IEEE-assigned organizationally Unique Identifier (OUI) of the maker of this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw.…	OctetString Constraints: range: 0-3	.1.3.6.1.4.1.43.2.24.2.3.1.10
dlswTConnOperPartnerVersionStrmandatory This value identifies the particular product version (e.g., product name, code level, fix level) of this partner DLSw. The format of the actual version string is vendor-specific. This information is obtained from a DLSw…	OctetString Constraints: range: 0-253	.1.3.6.1.4.1.43.2.24.2.3.1.11
dlswTConnOperPartnerInitPacingWndwmandatory The value of the partner initial receive pacing window. This is our initial send pacing window for all new circuits on this transport connection, as modified and granted by the first flow control indication the partner…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.2.24.2.3.1.12
dlswTConnOperPartnerSapListmandatory The Supported SAP List received in the capabilities exchange message from the partner DLSw. This list has the same format described for dlswTConnConfigSapList. A string of zero length is returned before a Capabilities …	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.43.2.24.2.3.1.13
dlswTConnOperPartnerNBExclmandatory The value of true signifies that the NetBIOS names received from this partner in the NetBIOS name list in its capabilities exchange message are the only NetBIOS names reachable by that partner. -False- indicates that o…	Truthvalue Type Values: 1 false 2 true	.1.3.6.1.4.1.43.2.24.2.3.1.14
dlswTConnOperPartnerMacExclmandatory The value of true signifies that the MAC addresses received from this partner in the MAC address list in its capabilities exchange message are the only MAC addresses reachable by that partner. -False- indicates that ot…	Truthvalue Type Values: 1 false 2 true	.1.3.6.1.4.1.43.2.24.2.3.1.15
dlswTConnOperPartnerNBInfomandatory It is up to this DSLw whether to keep either none, some, or all of the NetBIOS name list that was received in the capabilities exchange message sent by this partner DLSw. This object identifies how much information was …	Enumeration Enumerated Values: 1 none 2 partial 3 complete 4 notApplicable	.1.3.6.1.4.1.43.2.24.2.3.1.16
dlswTConnOperPartnerMacInfomandatory It is up to this DLSw whether to keep either none, some, or all of the MAC address list that was received in the capabilities exchange message sent by this partner DLSw. This object identifies how much information was k…	Enumeration Enumerated Values: 1 none 2 partial 3 complete 4 notApplicable	.1.3.6.1.4.1.43.2.24.2.3.1.17
dlswTConnOperDiscTimemandatory The value of dlswUpTime when dlswTConnOperState last entered -disconnected- state.	DlswTimeStamp	.1.3.6.1.4.1.43.2.24.2.3.1.18
dlswTConnOperDiscReasonmandatory This object signifies the reason that either prevented the transport connection from entering the connected state, or caused the transport connection to enter the disconnected state.	Enumeration Enumerated Values: 1 other 2 capExFailed 3 transportLayerDisc 4 operatorCommand 5 lastCircuitDiscd 6 protocolError	.1.3.6.1.4.1.43.2.24.2.3.1.19
dlswTConnOperDiscActiveCirmandatory The number of circuits active (not in DISCONNECTED state) at the time the transport connection was last disconnected. This value is zero if the transport connection has never been connected.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.24.2.3.1.20
dlswTConnOperInDataPktsmandatory The number of Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.21
dlswTConnOperOutDataPktsmandatory The number of Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this transport connection.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.22
dlswTConnOperInDataOctetsmandatory The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection. Each message is counted starting with the first octet following the SSP me…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.23
dlswTConnOperOutDataOctetsmandatory The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this transport connection. Each message is counted starting with the first octet following the SSP…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.24
dlswTConnOperInCntlPktsmandatory The number of Switch-to-Switch Protocol (SSP) messages received on this transport connection which were not of type DGRMFRAME, DATAFRAME, or INFOFRAME.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.25
dlswTConnOperOutCntlPktsmandatory The number of Switch-to-Switch Protocol (SSP) messages of transmitted on this transport connection which were not of type DGRMFRAME, DATAFRAME, or INFOFRAME.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.26
dlswTConnOperCURexSentsmandatory The number of CanUReach_ex messages sent on this transport connection.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.27
dlswTConnOperICRexRcvdsmandatory The number of ICanReach_ex messages received on this transport connection.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.28
dlswTConnOperCURexRcvdsmandatory The number of CanUReach_ex messages received on this transport connection.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.29
dlswTConnOperICRexSentsmandatory The number of ICanReach_ex messages sent on this transport connection.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.30
dlswTConnOperNQexSentsmandatory The number of NetBIOS_NQ_ex (NetBIOS Name Query-explorer) messages sent on this transport connection.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.31
dlswTConnOperNRexRcvdsmandatory The number of NETBIOS_NR_ex (NetBIOS Name Recognized-explorer) messages received on this transport connection.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.32
dlswTConnOperNQexRcvdsmandatory The number of NETBIOS_NQ_ex messages received on this transport connection.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.33
dlswTConnOperNRexSentsmandatory The number of NETBIOS_NR_ex messages sent on this transport connection.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.34
dlswTConnOperCirCreatesmandatory The number of times that circuits entered -circuit_established- state (not counting transitions from -circuit_restart-).	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.35
dlswTConnOperCircuitsmandatory The number of currently active circuits on this transport connection, where -active- means not in -disconnected- state.	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.2.3.1.36

This table contains locations of MAC addresses.
They could be either verified or not verified,
local or remote, and configured locally or learned
from either Capabilities Exchange messages or
directory searches.

dlswDirMacEntry row .1.3.6.1.4.1.43.2.24.4.2.1.1

Indexed by dlswDirMacIndex.

Indexes

dlswDirMacIndex

Column	Syntax	OID
dlswDirMacIndexmandatory Uniquely identifies a conceptual row of this table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.24.4.2.1.1.1
dlswDirMacMacmandatory The MAC address, together with the dlswDirMacMask, specifies a set of MAC addresses that are defined or discovered through an interface or partner DLSw nodes.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.43.2.24.4.2.1.1.2
dlswDirMacMaskmandatory The MAC address mask, together with the dlswDirMacMac, specifies a set of MAC addresses that are defined or discovered through an interface or partner DLSw nodes.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.43.2.24.4.2.1.1.3
dlswDirMacEntryTypemandatory The cause of the creation of this conceptual row. It could be one of the three methods: (1) user configured, including via management protocol set operations, configuration file, command line or equivalent methods; (2) …	Enumeration Enumerated Values: 1 other 2 userConfiguredPublic 3 userConfiguredPrivate 4 partnerCapExMsg 5 dynamic	.1.3.6.1.4.1.43.2.24.4.2.1.1.4
dlswDirMacLocationTypemandatory The location of the resource (or a collection of resources using a mask) of this conceptual row is either (1) local - the resource is reachable via an interface, or (2) remote - the resource is reachable via a partner D…	Enumeration Enumerated Values: 1 other 2 local 3 remote	.1.3.6.1.4.1.43.2.24.4.2.1.1.5
dlswDirMacLocationmandatory Points to either the ifEntry, dlswTConnConfigEntry, dlswTConnOperEntry, 0.0, or something that is implementation specific. It identifies the location of the MAC address (or the collection of MAC addresses.)	Instancepointer	.1.3.6.1.4.1.43.2.24.4.2.1.1.6
dlswDirMacStatusmandatory This object specifies whether DLSw currently believes the MAC address to be accessible at the specified location. The value `notReachable' allows a configured resource definition to be taken out of service when a search…	Enumeration Enumerated Values: 1 unknown 2 reachable 3 notReachable	.1.3.6.1.4.1.43.2.24.4.2.1.1.7
dlswDirMacLFSizemandatory The largest size of the MAC INFO field (LLC header and data) that a circuit to the MAC address can carry through this path.	LFSize	.1.3.6.1.4.1.43.2.24.4.2.1.1.8
dlswDirMacRowStatusmandatory This object is used by a Management Station to create or delete the row entry in the dlswDirMacTable following the RowStatus textual convention.	RowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.2.24.4.2.1.1.9

This table contains locations of NetBIOS names.
They could be either verified or not verified,
local or remote, and configured locally or learned
from either Capabilities Exchange messages or
directory searches.

dlswDirNBEntry row .1.3.6.1.4.1.43.2.24.4.2.2.1

Indexed by dlswDirNBIndex.

Indexes

dlswDirNBIndex

Column	Syntax	OID
dlswDirNBIndexmandatory Uniquely identifies a conceptual row of this table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.24.4.2.2.1.1
dlswDirNBNamemandatory The NetBIOS name (including `any char' and `wildcard' characters) specifies a set of NetBIOS names that are defined or discovered through an interface or partner DLSw nodes.	NBName Type Constraints: range: 0..16	.1.3.6.1.4.1.43.2.24.4.2.2.1.2
dlswDirNBNameTypemandatory Whether dlswDirNBName represents an (or a set of) individual or group NetBIOS name(s).	Enumeration Enumerated Values: 1 unknown 2 individual 3 group	.1.3.6.1.4.1.43.2.24.4.2.2.1.3
dlswDirNBEntryTypemandatory The cause of the creation of this conceptual row. It could be one of the three methods: (1) user configured, including via management protocol set operations, configuration file, command line, or equivalent methods; (2)…	Enumeration Enumerated Values: 1 other 2 userConfiguredPublic 3 userConfiguredPrivate 4 partnerCapExMsg 5 dynamic	.1.3.6.1.4.1.43.2.24.4.2.2.1.4
dlswDirNBLocationTypemandatory The location of the resource (or a collection of resources using any char/wildcard characters) of this conceptual row is either (1) local - the resource is reachable via an interface, or (2) remote - the resource is rea…	Enumeration Enumerated Values: 1 other 2 local 3 remote	.1.3.6.1.4.1.43.2.24.4.2.2.1.5
dlswDirNBLocationmandatory Points to either the ifEntry, dlswTConnConfigEntry, dlswTConnOperEntry, 0.0, or something that is implementation specific. It identifies the location of the NetBIOS name or the set of NetBIOS names.	Instancepointer	.1.3.6.1.4.1.43.2.24.4.2.2.1.6
dlswDirNBStatusmandatory This object specifies whether DLSw currently believes the NetBIOS name to be accessible at the specified location. The value `notReachable' allows a configured resource definition to be taken out of service when a searc…	Enumeration Enumerated Values: 1 unknown 2 reachable 3 notReachable	.1.3.6.1.4.1.43.2.24.4.2.2.1.7
dlswDirNBLFSizemandatory The largest size of the MAC INFO field (LLC header and data) that a circuit to the NB name can carry through this path.	LFSize	.1.3.6.1.4.1.43.2.24.4.2.2.1.8
dlswDirNBRowStatusmandatory This object is used by a Management Station to create or delete the row entry in the dlswDirNBTable following the RowStatus textual convention.	RowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.2.24.4.2.2.1.9

This table is the circuit representation in the DLSw
entity. Virtual data links are used to represent any internal
end stations.  There is a conceptual row associated with
each data link.  Thus, for circuits without an intervening
transport connection, there are two conceptual rows
for each circuit.
          
The table consists of the circuits being established,
established, and as an implementation option, circuits that
have been disconnected.  For circuits carried over
transport connections, an entry is created after
the CUR_cs was sent or received.  For circuits between
two locally attached devices, or internal virtual MAC
addresses, an entry is created when the equivalent of
CUR_cs sent/received status is reached.
          
End station 1 (S1) and End station 2 (S2) are used to
represent the two end stations of the circuit.
S1 is always an end station which is locally attached.
S2 may be locally attached or remote.  If it is locally
attached, the circuit will be represented by two rows indexed
by (A, B) and (B, A) where A & B are the relevant MACs/SAPs.
          
The table may be used to store the causes of disconnection of
circuits.  It is recommended that the oldest disconnected
circuit entry be removed from this table when the memory
space of disconnected circuits is needed.

dlswCircuitEntry row .1.3.6.1.4.1.43.2.24.5.2.1

Indexes

dlswCircuitS1Mac dlswCircuitS1Sap dlswCircuitS2Mac dlswCircuitS2Sap

Column	Syntax	OID
dlswCircuitS1Macmandatory The MAC Address of End Station 1 (S1) used for this circuit.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.43.2.24.5.2.1.1
dlswCircuitS1Sapmandatory The SAP at End Station 1 (S1) used for this circuit.	OctetString Constraints: range: 1-1	.1.3.6.1.4.1.43.2.24.5.2.1.2
dlswCircuitS1IfIndexmandatory The IfEntry index of the local interface through which S1 can be reached.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.24.5.2.1.3
dlswCircuitS1DlcTypemandatory The DLC protocol in use between the DLSw node and S1.	DlcType Type Values: 1 other 2 na 3 llc 4 sdlc	.1.3.6.1.4.1.43.2.24.5.2.1.4
dlswCircuitS1RouteInfomandatory If source-route bridging is in use between the DLSw node and S1, this is the routing information field describing the path between the two devices. Otherwise the value will be an OCTET STRING of zero length.	OctetString Constraints: range: 0-30	.1.3.6.1.4.1.43.2.24.5.2.1.5
dlswCircuitS1CircuitIdmandatory The Circuit ID assigned by this DLSw node to this circuit. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circuit, the …	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.43.2.24.5.2.1.6
dlswCircuitS1Dlcmandatory Points to a conceptual row of the underlying DLC MIB, which could either be the standard SDLC or LLC MIBs, or an enterprise-specific DLC MIB.	Instancepointer	.1.3.6.1.4.1.43.2.24.5.2.1.7
dlswCircuitS2Macmandatory The MAC Address of End Station 2 (S2) used for this circuit.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.43.2.24.5.2.1.8
dlswCircuitS2Sapmandatory The SAP at End Station 2 (S2) used for this circuit.	OctetString Constraints: range: 1-1	.1.3.6.1.4.1.43.2.24.5.2.1.9
dlswCircuitS2Locationmandatory The location of End Station 2 (S2). If the location of End Station 2 is local, the interface information will be available in the conceptual row whose S1 and S2 are the S2 and the S1 of this conceptual row, respectively.	EndStationLocation Type Values: 1 other 2 internal 3 remote 4 local	.1.3.6.1.4.1.43.2.24.5.2.1.10
dlswCircuitS2TDomainmandatory If the location of End Station 2 is remote, this value is the transport domain of the transport protocol the circuit is running over. Otherwise, the value is 0.0.	ObjectIdentifier	.1.3.6.1.4.1.43.2.24.5.2.1.11
dlswCircuitS2TAddressmandatory If the location of End Station 2 is remote, this object contains the address of the partner DLSw, else it will be an OCTET STRING of zero length.	TAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.2.24.5.2.1.12
dlswCircuitS2CircuitIdmandatory The Circuit ID assigned to this circuit by the partner DLSw node. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circu…	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.43.2.24.5.2.1.13
dlswCircuitOriginmandatory This object specifies which of the two end stations initiated the establishment of this circuit.	Enumeration Enumerated Values: 1 s1 2 s2	.1.3.6.1.4.1.43.2.24.5.2.1.14
dlswCircuitEntryTimemandatory The value of dlswUpTime when this circuit table conceptual row was created.	DlswTimeStamp	.1.3.6.1.4.1.43.2.24.5.2.1.15
dlswCircuitStateTimemandatory The value of dlswUpTime when this circuit entered the current state.	DlswTimeStamp	.1.3.6.1.4.1.43.2.24.5.2.1.16
dlswCircuitStatemandatory The current state of this circuit. The implementation may choose to keep entries for some period of time after circuit disconnect, so the network management station can gather the time and cause of disconnection. …	Enumerationr/w Enumerated Values: 1 disconnected 2 circuitStart 3 resolvePending 4 circuitPending 5 circuitEstablished 6 connectPending 7 contactPending 8 connected 9 disconnectPending 10 haltPending 11 haltPendingNoack 12 circuitRestart 13 restartPending	.1.3.6.1.4.1.43.2.24.5.2.1.17
dlswCircuitPrioritymandatory The transmission priority of this circuit as understood by this DLSw node. This value is determined by the two DLSw nodes at circuit startup time. If this DLSw node does not support DLSw circuit priority, the value -u…	Enumeration Enumerated Values: 0 unsupported 1 low 2 medium 3 high 4 highest	.1.3.6.1.4.1.43.2.24.5.2.1.18
dlswCircuitFCSendGrantedUnitsmandatory The number of paced SSP messages that this DLSw is currently authorized to send on this circuit before it must stop and wait for an additional flow control indication from the partner DLSw. The value zero…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.2.24.5.2.1.19
dlswCircuitFCSendCurrentWndwmandatory The current window size that this DLSw is using in its role as a data sender. This is the value by which this DLSw would increase the number of messages it is authorized to send, if it were to receive a flow control in…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.2.24.5.2.1.20
dlswCircuitFCRecvGrantedUnitsmandatory The current number of paced SSP messages that this DLSw has authorized the partner DLSw to send on this circuit before the partner DLSw must stop and wait for an additional flow control indication from this DLSw. …	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.2.24.5.2.1.21
dlswCircuitFCRecvCurrentWndwmandatory The current window size that this DLSw is using in its role as a data receiver. This is the number of additional paced SSP messages that this DLSw would be authorizing its DLSw partner to send, if this DLSw were to sen…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.2.24.5.2.1.22
dlswCircuitFCLargestRecvGrantedmandatory The largest receive window size granted by this DLSw during the current activation of this circuit. This is not the largest number of messages granted at any time, but the largest window size as represented by FCIND op…	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.5.2.1.23
dlswCircuitFCLargestSendGrantedmandatory The largest send (with respect to this DLSw) window size granted by the partner DLSw during the current activation of this circuit. The value zero should be returned if this circuit is not running the DLS…	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.5.2.1.24
dlswCircuitFCHalveWndwSentsmandatory The number of Halve Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should be returned if this circuit is not running the DLSw pacing protocol.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.5.2.1.25
dlswCircuitFCResetOpSentsmandatory The number of Reset Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should be returned if this circuit is not running the DLSw pacing protocol.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.5.2.1.26
dlswCircuitFCHalveWndwRcvdsmandatory The number of Halve Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit is not running the DLSw pacing protocol.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.5.2.1.27
dlswCircuitFCResetOpRcvdsmandatory The number of Reset Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit is not running the DLSw pacing protocol.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.2.24.5.2.1.28
dlswCircuitDiscReasonLocalmandatory The reason why this circuit was last disconnected, as seen by this DLSw node. This object is present only if the implementation keeps circuit table entries around for some period after circuit disconnect.	Enumeration Enumerated Values: 1 endStationDiscRcvd 2 endStationDlcError 3 protocolError 4 operatorCommand 5 haltDlRcvd 6 haltDlNoAckRcvd 7 transportConnClosed	.1.3.6.1.4.1.43.2.24.5.2.1.29
dlswCircuitDiscReasonRemotemandatory The generic reason code why this circuit was last disconnected, as reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK. If the partner does not send a reason code in these messages, or the DLSw implementation doe…	Enumeration Enumerated Values: 0 unknown 1 endStationDiscRcvd 2 endStationDlcError 3 protocolError 4 operatorCommand	.1.3.6.1.4.1.43.2.24.5.2.1.30
dlswCircuitDiscReasonRemoteDatamandatory Implementation-specific data reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK, to help specify how and why this circuit was last disconnected. If the partner does not send this data in these messages, or the …	OctetString Constraints: range: 0-4	.1.3.6.1.4.1.43.2.24.5.2.1.31