A3COM-SWITCHING-SYSTEMS-FILTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
28

a3ComFilterAddressGroupTable

table mandatory
.1.3.6.1.4.1.43.29.4.20.1.3 · 1 row entry · 5 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComFilterAddressGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-SWITCHING-SYSTEMS-FILTER-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-SWITCHING-SYSTEMS-FILTER-MIB::a3ComFilterAddressGroupTable' 
A list of address group entries.  A single 
entry exists in this list for each defined 
address group in the system.
a3ComFilterAddressGroupEntry row .1.3.6.1.4.1.43.29.4.20.1.3.1
An individual address group entry.
Indexes
Column Syntax OID
a3ComFilterAddressGroupIdmandatory
This object uniquely identifies an address group in the
systems. Its value, successively increases starting from 0,
will change only if the system is rebooted. This object is
obtained from a3ComFilterAddressGroupNex…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.1.3.1.1
a3ComFilterAddressGroupMaskIdmandatory
This object identifies an address group in a bridge. Each
address group has an unique mask identifier, range from 1 to 32,
associated with it in a bridge. This field has to be set in
order to create a new address gro…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.20.1.3.1.2
a3ComFilterAddressGroupBridgeMaskmandatory
A mask that uniquely identifies the bridge value(s)
associated with this address group entry. For example,
0x0000 0000 0000 0003 represents the address group entry in
bridge number 1 and 2.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.43.29.4.20.1.3.1.3
a3ComFilterAddressGroupNamemandatory
The name of an address group. Each address group
has an unique name in a system.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.43.29.4.20.1.3.1.4
a3ComFilterAddressGroupStatusmandatory
The status column for this address group entry. This OBJECT
can be set to:
createAndGo(4)
destroy(6)

The following values may be read:
active(1)

Setting this object to createAndGo(4…
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.20.1.3.1.5

a3ComFilterAddressTable

table mandatory
.1.3.6.1.4.1.43.29.4.20.1.4 · 1 row entry · 3 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComFilterAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-SWITCHING-SYSTEMS-FILTER-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-SWITCHING-SYSTEMS-FILTER-MIB::a3ComFilterAddressTable' 
A list of address entries.
a3ComFilterAddressEntry row .1.3.6.1.4.1.43.29.4.20.1.4.1
A set of parameters for a particular address entry.
Indexes
Column Syntax OID
a3ComFilterAddressIdmandatory
This object uniquely identifies an address group as
defined in a3ComFilterAddressGroupTable. It is obtained
from a3ComFilterAddressGroupNextAvailableIndex.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.1.4.1.1
a3ComFilterAddressAddressmandatory
The physical address of this entry.
RFC1213-MIBPhysAddress .1.3.6.1.4.1.43.29.4.20.1.4.1.2
a3ComFilterAddressStatusmandatory
The status column for this address group entry. This
OBJECT can be set to:
createAndGo(4)
destroy(6)

The following values may be read:
active(1)

Setting this object to createAndGo(4)…
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.20.1.4.1.3

a3ComFilterPortGroupTable

table mandatory
.1.3.6.1.4.1.43.29.4.20.2.3 · 1 row entry · 5 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComFilterPortGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-SWITCHING-SYSTEMS-FILTER-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-SWITCHING-SYSTEMS-FILTER-MIB::a3ComFilterPortGroupTable' 
A list of port group entries.  A single 
entry exists in this list for each defined 
port group in the system.
a3ComFilterPortGroupEntry row .1.3.6.1.4.1.43.29.4.20.2.3.1
A set of parameters for an individual port
group entry.
Indexes
Column Syntax OID
a3ComFilterPortGroupIdmandatory
This object uniquely identifies a port group in the
systems. Its value, successively increases starting from 0,
will change only if the system is rebooted. This object is
obtained from a3ComFilterPortGroupNextAvaila…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.2.3.1.1
a3ComFilterPortGroupMaskIdmandatory
This object identifies a port group in a bridge. Each
port group has an unique mask identifier, range from 1 to 32,
associated with it in a bridge. This field has to be set in
order to create a new port group in a br…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.20.2.3.1.2
a3ComFilterPortGroupBridgeNumbermandatory
The bridge index associated with this port group.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.20.2.3.1.3
a3ComFilterPortGroupNamemandatory
The name of this port group. This object has be
unique in a system.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.43.29.4.20.2.3.1.4
a3ComFilterPortGroupStatusmandatory
The status column for this port group entry. This OBJECT
can be set to:
createAndGo(4)
destroy(6)

The following values may be read:
active(1)


Setting this object to …
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.20.2.3.1.5

a3ComFilterPortTable

table mandatory
.1.3.6.1.4.1.43.29.4.20.2.4 · 1 row entry · 4 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComFilterPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-SWITCHING-SYSTEMS-FILTER-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-SWITCHING-SYSTEMS-FILTER-MIB::a3ComFilterPortTable' 
A list of port entries.
a3ComFilterPortEntry row .1.3.6.1.4.1.43.29.4.20.2.4.1
An individual port entry.
Indexes
Column Syntax OID
a3ComFilterPortIdmandatory
This object uniquely identify an address group in the systems.
It successively increases starting from 1. This value is
obtained through a3ComFilterPortGroupNextAvailableIndex when
a new port group needs to be create…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.2.4.1.1
a3ComFilterPortTypemandatory
This indicates interface port type(s) that are currently
supported by LanPlex modules.
A3ComFilterPortType
Type Constraints:
range: 1..5
 .1.3.6.1.4.1.43.29.4.20.2.4.1.2
a3ComFilterPortPortmandatory
The port on the bridge identified by port type.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.2.4.1.3
a3ComFilterPortStatusmandatory
The status column for this port group entry.
This OBJECT can be set to:

createAndGo(4)
destroy(6)

The following values may be read:
active(1)

Setting this object to cre…
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.20.2.4.1.4

a3ComBridgeFilterTable

table mandatory
.1.3.6.1.4.1.43.29.4.20.3.3 · 1 row entry · 5 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComBridgeFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-SWITCHING-SYSTEMS-FILTER-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-SWITCHING-SYSTEMS-FILTER-MIB::a3ComBridgeFilterTable' 
The list of stored bridge packet filter programs on 
bridge(s), bridge port(s) and port processing path.
a3ComBridgeFilterEntry row .1.3.6.1.4.1.43.29.4.20.3.3.1
The set of parameters for an individual bridge packet filter
program.
Indexes
Column Syntax OID
a3ComBridgeFilterIdmandatory
An index that uniquely identifies a bridge filter in a system.
Its value will change only if the system is rebooted.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.3.3.1.1
a3ComBridgeFilterBridgeNumbermandatory
The bridge index associated with this bridge
filter program.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.3.3.1.2
a3ComBridgeFilterNamemandatory
The filter name associated with this entry.
OctetString
Constraints:
range: 32-32
 .1.3.6.1.4.1.43.29.4.20.3.3.1.3
a3ComBridgeFilterProgrammandatory
The bridge filter program.
OctetString
Constraints:
range: 255-255
 .1.3.6.1.4.1.43.29.4.20.3.3.1.4
a3ComBridgeFilterStatusmandatory
The status column for this filter definition entry.
This OBJECT can be set to:

createAndGo(4)
destroy(6)

The following values may be read:
active(1)

Creation of bridge…
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.20.3.3.1.5

a3ComPortFilterTable

table mandatory
.1.3.6.1.4.1.43.29.4.20.3.4 · 1 row entry · 6 columns
Open in standard view
Uses the a3com variant from /opt/observium/mibs/a3com.
Command help
Walk a3ComPortFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-SWITCHING-SYSTEMS-FILTER-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-SWITCHING-SYSTEMS-FILTER-MIB::a3ComPortFilterTable' 
The list of stored bridge packet filter programs on 
bridge(s), bridge port(s) and port processing path.
a3ComPortFilterEntry row .1.3.6.1.4.1.43.29.4.20.3.4.1
The set of parameters for an individual bridge packet filter
program.
Indexes
Column Syntax OID
a3ComPortFilterIdmandatory
An index that uniquely identifies a bridge filter on the bridge.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.3.4.1.1
a3ComPortFilterBridgeNumbermandatory
The bridge index associated with this bridge
filter program.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.3.4.1.2
a3ComPortFilterBridgePortTypemandatory
This indicates interface port type(s) that are currently
supported by LanPlex modules.
A3ComFilterPortType
Type Constraints:
range: 1..5
 .1.3.6.1.4.1.43.29.4.20.3.4.1.3
a3ComPortFilterBridgePortPortmandatory
The port on the bridge identified by this row's a3ComPortFilterBridgeNumber.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.3.4.1.4
a3ComPortFilterPktProcessPathmandatory
The packet processing path to apply the filter. The value
is a bit mask defined as follows:

Mask Value Path Description
0x1 Xmit All All frames xmitted to segment
connected to …
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.20.3.4.1.5
a3ComPortFilterStatusmandatory
The status column for this filter definition entry.
This OBJECT can be set to:

active(1)
createAndGo(4)
createAndWait(5)
destroy(6)

The following values may be read:
active(1)
notIn…
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.20.3.4.1.6