A3COM-PRIVATE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

lineTable

table

.1.3.6.1.4.1.43.35.8.2.1 · 1 row entry · 5 columns

Open in standard view

Uses the a3com variant from /opt/observium/mibs/a3com.

Command help

Walk lineTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-PRIVATE-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-PRIVATE-MIB::lineTable'

Table of descriptive and status information about
configuration of each RS-232 line in this system

lineEntry row .1.3.6.1.4.1.43.35.8.2.1.1

An entry in the table, containing information
about configuration in one RS232 line of the Access Point.

Indexes

lineIndex

Column Syntax OID

lineIndex

This is defined as RS-232 index.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.35.8.2.1.1.1

lineDataBits

This is defined as number of data bits for the RS232 interface.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.35.8.2.1.1.2

lineParity

This is defined as parity of the RS232 interface.

Enumeration

Enumerated Values:

1	odd
2	even
99	none

.1.3.6.1.4.1.43.35.8.2.1.1.3

lineSpeed

This is defined as the speed of the RS-232 interface.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.35.8.2.1.1.4

lineStopBits

This is defined as the number of stop bits for the RS-232 interface.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.35.8.2.1.1.5

portTable

table

.1.3.6.1.4.1.43.35.8.3.1 · 1 row entry · 9 columns

Open in standard view

Uses the a3com variant from /opt/observium/mibs/a3com.

Command help

Walk portTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-PRIVATE-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-PRIVATE-MIB::portTable'

Table of descriptive and status information about
configuration of each switch port (including expansion slot)
in this system. This table also contains information
about each trunk (similar to Cisco's EtherChannel).

portEntry row .1.3.6.1.4.1.43.35.8.3.1.1

An entry in the table, containing information
about configuration in one switch port of the switch.

Indexes

portIndex

Column Syntax OID

portIndex

This is defined as ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.35.8.3.1.1.1

portName

Indicates the port name. This is same as
ifAlias in the IF-MIB (RFC2863 or later).

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.43.35.8.3.1.1.2

portType

Indicates the port type.

Enumeration

Enumerated Values:

1	other
2	hundredBaseTX
3	hundredBaseFX
4	thousandBaseSX
5	thousandBaseLX
6	thousandBaseT
7	thousandBaseGBIC
8	thousandBaseMiniGBIC

.1.3.6.1.4.1.43.35.8.3.1.1.3

portSpeedDpxCfg

Set the port speed and duplex mode as follows:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100…

Enumeration

Enumerated Values:

1	reserved
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000

.1.3.6.1.4.1.43.35.8.3.1.1.4

portFlowCtrlCfg

(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in…

Enumeration

Enumerated Values:

1	enabled
2	disabled
3	backPressure
4	dot3xFlowControl

.1.3.6.1.4.1.43.35.8.3.1.1.5

portCapabilities

Port capabilities.

Enumeration

Enumerated Values:

1	portCap10full
2	portCap100half
3	portCap100full
4	portCap1000half
5	portCap1000full
6	reserved6
7	reserved7
8	reserved8
9	reserved9
10	reserved10
11	reserved11
12	reserved12
13	reserved13
14	portCapSym
15	portCapFlowCtrl
99	portCap10half

.1.3.6.1.4.1.43.35.8.3.1.1.6

portAutonegotiation

Whether autonegotiation is enabled.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.43.35.8.3.1.1.7

portSpeedDpxStatus

The operating speed and duplex mode of the
switched port. If this index is a trunk,
the speed is the speed of its individual members.
If this index is a trunk and the result
is inconsistent among its member ports, this …

Enumeration

Enumerated Values:

1	error
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000

.1.3.6.1.4.1.43.35.8.3.1.1.8

portFlowCtrlStatus

(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
(4) Flow control mechanism is disabled.
If this index is a trunk and the result
is inconsistent among its member ports, thi…

Enumeration

Enumerated Values:

1	error
2	backPressure
3	dot3xFlowControl
4	none

.1.3.6.1.4.1.43.35.8.3.1.1.9

dot11AuthenticationServerTable

table

.1.3.6.1.4.1.43.35.8.7.6 · 1 row entry · 8 columns

Open in standard view

Uses the a3com variant from /opt/observium/mibs/a3com.

Command help

Walk dot11AuthenticationServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-PRIVATE-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-PRIVATE-MIB::dot11AuthenticationServerTable'

Table of descriptive and status information about
configuration of each authentication server.

dot11AuthenticationServerEntry row .1.3.6.1.4.1.43.35.8.7.6.1

An entry in the table, containing information
about configuration of one authentication server of the AP.

Indexes

dot11AuthenticationServerIndex

Column	Syntax	OID
dot11AuthenticationServerIndex Index of the Authentication Server	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.43.35.8.7.6.1.1`
dot11AuthenticationServer This value indicates the IP address of the authentication server.	RFC1155-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.43.35.8.7.6.1.2`
dot11AuthenticationPort This value indicates the UDP Port used by the authentication server.	Integer32r/w Constraints: `range: 1024-65535`	`.1.3.6.1.4.1.43.35.8.7.6.1.3`
dot11AuthenticationKey This value indicates the shared key used by the authentication server.	OctetStringr/w Constraints: `range: 0-20`	`.1.3.6.1.4.1.43.35.8.7.6.1.4`
dot11AuthenticationRetransmit This value indicates the retransmit timer length used by the authentication server.	Integer32r/w Constraints: `range: 1-30`	`.1.3.6.1.4.1.43.35.8.7.6.1.5`
dot11AuthenticationTimeout This value indicates the Timeout value(sec) used by the authentication server.	Integer32r/w Constraints: `range: 1-60`	`.1.3.6.1.4.1.43.35.8.7.6.1.6`
dot11AuthenticationAcctPort The port number for radius server accounting.	Integer32r/w Constraints: `range: 1024-65535`	`.1.3.6.1.4.1.43.35.8.7.6.1.7`
dot11AuthenticationInterimUpdate This value indicates the Timeout value(sec) used by the radius server interim update.	Integer32r/w Constraints: `range: 60-86400`	`.1.3.6.1.4.1.43.35.8.7.6.1.8`

dot11FilterTable

table

.1.3.6.1.4.1.43.35.8.7.7.2 · 1 row entry · 2 columns

Open in standard view

Uses the a3com variant from /opt/observium/mibs/a3com.

Command help

Walk dot11FilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-PRIVATE-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-PRIVATE-MIB::dot11FilterTable'

Table of status information about
each configured MAC Address Filtering Entry.

dot11FilterEntry row .1.3.6.1.4.1.43.35.8.7.7.2.1

An entry in the table, containing information
about configuration in one radio of the AP.

Indexes

dot11FilterAddress

Column Syntax OID

dot11FilterAddress

This value indicates the MAC address of the
filter entry.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.43.35.8.7.7.2.1.1

dot11FilterStatus

This value indicates the Status of the filter entry.
Ifallowed, the client is allowed access to the network.
If disallowed, the no frames will be forwarded to the
network from the client.

Enumerationr/w

Enumerated Values:

30	allowed
31	denied
32	delete

.1.3.6.1.4.1.43.35.8.7.7.2.1.2

dot11AuthenticationSupplicantTable

table

.1.3.6.1.4.1.43.35.8.7.8 · 1 row entry · 4 columns

Open in standard view

Uses the a3com variant from /opt/observium/mibs/a3com.

Command help

Walk dot11AuthenticationSupplicantTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-PRIVATE-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-PRIVATE-MIB::dot11AuthenticationSupplicantTable'

Table of descriptive and status information about
configuration of supplicant

dot11AuthenticationSupplicantEntry row .1.3.6.1.4.1.43.35.8.7.8.1

An entry in the table, containing information
about configuration of one supplicant.

Indexes

dot118021xSuppIndex

Column Syntax OID

dot118021xSuppIndex

Index of the interface for which this supplicant is
running. Currently only the ethernet interface.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.35.8.7.8.1.1

dot118021xSuppState

This object is used to enable or disable the 802.1x supplicant.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.43.35.8.7.8.1.2

dot118021xSuppUser

This value indicates the username for supplicant. If value is
configured, will display ****. Else will display EMPTY.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.43.35.8.7.8.1.3

dot118021xSuppPasswd

This value indicates the password for supplicant. If value is
configured, will display ****. Else will display EMPTY.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.43.35.8.7.8.1.4

enterpriseApSecurityTable

table

.1.3.6.1.4.1.43.35.8.9.1 · 1 row entry · 10 columns

Open in standard view

Uses the a3com variant from /opt/observium/mibs/a3com.

Command help

Walk enterpriseApSecurityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-PRIVATE-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-PRIVATE-MIB::enterpriseApSecurityTable'

Table of descriptive and status information about
configuration of each radio in terms of security settings.

enterpriseApSecurityEntry row .1.3.6.1.4.1.43.35.8.9.1.1

An entry in the table, containing information
about configuration of one radio of the AP.

Indexes

enterpriseApSecurityIndex

Column Syntax OID

enterpriseApSecurityIndex

Radio Index for security settings.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.35.8.9.1.1.1

enterpriseApSecurityAuthType

This value indicates the type of authentication in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	open
1	shared

.1.3.6.1.4.1.43.35.8.9.1.1.2

enterpriseApSecuritySharedKeyLen

This value indicates the shared key length for this radio interface.

Enumeration

Enumerated Values:

0	none
1	sixtyFour
2	oneHundredTwentyEight
3	oneHundredFiftyTwo

.1.3.6.1.4.1.43.35.8.9.1.1.3

enterpriseApSecurityWPAMode

This value indicates the state of WPA for this radio interface.

Enumerationr/w

Enumerated Values:

0	supported
1	required
2	disabled

.1.3.6.1.4.1.43.35.8.9.1.1.4

enterpriseApSecurityWPAKeyType

This value indicates the type of WPA Key Management in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	dot1x
1	presharedkey

.1.3.6.1.4.1.43.35.8.9.1.1.5

enterpriseApSecurityWPACipher

This value indicates the type of WPA Cipher in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	wep
1	tkip
2	aes

.1.3.6.1.4.1.43.35.8.9.1.1.6

enterpriseApSecurityWPAPSKType

This value indicates the type of WPA Pre Shared Key in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	hex
1	alphanumeric

.1.3.6.1.4.1.43.35.8.9.1.1.7

enterpriseApSecurityWPAPSK

This value indicates WPA Pre Shared Key in use for this radio interface.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.43.35.8.9.1.1.8

enterpriseApSecurityWEPKeyType

This value indicates the type of WEP Key in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	hexadecimal
1	alphanumeric

.1.3.6.1.4.1.43.35.8.9.1.1.9

enterpriseApSecurityWEPEnabled

This value indicates whether WEP is enabled.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.43.35.8.9.1.1.10

enterpriseApRadioTable

table

.1.3.6.1.4.1.43.35.8.10.1 · 1 row entry · 11 columns

Open in standard view

Uses the a3com variant from /opt/observium/mibs/a3com.

Command help

Walk enterpriseApRadioTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-PRIVATE-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-PRIVATE-MIB::enterpriseApRadioTable'

Table of descriptive and status information about
configuration of each radio.

enterpriseApRadioEntry row .1.3.6.1.4.1.43.35.8.10.1.1

An entry in the table, containing information
about configuration of one radio of the AP.

Indexes

enterpriseApRadioIndex

Column Syntax OID

enterpriseApRadioIndex

Radio Index for configuration.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.35.8.10.1.1.1

enterpriseApRadioAutoChannel

This value indicates whether auto channel selection is enabled or not
for this radio interface

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.43.35.8.10.1.1.2

enterpriseApRadioTransmitPower

This value indicates the transmit power for this radio interface.

Enumerationr/w

Enumerated Values:

1	full
2	half
3	middle
4	quarter
5	eighth
6	min

.1.3.6.1.4.1.43.35.8.10.1.1.3

enterpriseApRadioTurboMode

This value indicates whether turbo mode is enabled for this radio interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	invalid

.1.3.6.1.4.1.43.35.8.10.1.1.4

enterpriseApRadioDataRate

This value indicates the data rate for this radio interface.
Radio interface A operates at 6, 9, 12, 18, 24, 36, 48, 54.
Radio interface G operates all listed data rates. The auto
setting will attempt to set the best …

Enumerationr/w

Enumerated Values:

1	oneMbps
2	twoMbps
5	fiveAndHalfMbps
6	sixMbps
9	nineMbps
11	elevenMbps
12	twelveMbps
18	eighteenMbps
24	twentyFourMbps
36	thirtySixMbps
48	fourtyEightMbps
54	fiftyFourMbps
255	auto

.1.3.6.1.4.1.43.35.8.10.1.1.5

enterpriseApRadioGMode

This value indicates the radio mode for the 802.11g radio.
This setting is only valid for the 802.11g interface.

Enumerationr/w

Enumerated Values:

1	bOnly
2	gOnly
3	bg
4	invalid

.1.3.6.1.4.1.43.35.8.10.1.1.6

enterpriseApRadioAntennaMode

This value indicates the antenna mode in use for the G-radio.
The values are interpreted as follows:
both(1) means use both built-in antennas,
left(2) means use left side.
right(3) means use right side.
invalid(4) …

Enumerationr/w

Enumerated Values:

1	both
2	left
3	right
4	invalid

.1.3.6.1.4.1.43.35.8.10.1.1.7

rogueApState

This value is used to enable/disable Rogue Ap Detection for
this radio interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.43.35.8.10.1.1.8

rogueApInterval

How often to scan for Rogue Aps. The interval in minutes, with default
of 720(minutes).

Integer32r/w

Constraints:
range: 60-10080

.1.3.6.1.4.1.43.35.8.10.1.1.9

rogueApDuration

How long to scan each channel (in milliseconds). A longer duration will yield more
complete results. A shorter duration will allow clients a better chance
of remaining connected. Default value is 350(milliseconds).

Integer32r/w

Constraints:
range: 200-1000

.1.3.6.1.4.1.43.35.8.10.1.1.10

rogueApScanNow

When writing the value to enable, the AP will trigger the Rouge AP scan function.
The value will always return disable(2).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.43.35.8.10.1.1.11

enterpriseApVapRadioTable

table

.1.3.6.1.4.1.43.35.8.10.2 · 1 row entry · 6 columns

Open in standard view

Uses the a3com variant from /opt/observium/mibs/a3com.

Command help

Walk enterpriseApVapRadioTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-PRIVATE-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-PRIVATE-MIB::enterpriseApVapRadioTable'

Table of descriptive and status information about
configuration of each Vap radio.

enterpriseApVapRadioEntry row .1.3.6.1.4.1.43.35.8.10.2.1

An entry in the table, containing information
about configuration of one Vap radio of the AP.

Indexes

enterpriseApVapRadioIndex

Column Syntax OID

enterpriseApVapRadioIndex

Radio Index for configuration.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.35.8.10.2.1.1

enterpriseApVapRadioState

This value indicates the state of the radio interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.43.35.8.10.2.1.2

enterpriseApVapRadioClosedSystem

This value indicates whether closed system is enabled for this radio interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.43.35.8.10.2.1.3

enterpriseApVapRadioMaxAssoc

This value indicates the max number of clients allowed on this radio interface.

Integer32r/w

Constraints:
range: 1-64

.1.3.6.1.4.1.43.35.8.10.2.1.4

enterpriseApVapRadioTransmitKey

This value indicates default transmit key in use for this radio interface.

Integer32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.43.35.8.10.2.1.5

enterpriseApVapRadioDescription

This value indicates the description for this radio interface.

OctetStringr/w

Constraints:
range: 0-80

.1.3.6.1.4.1.43.35.8.10.2.1.6

radioWdsTable

table

.1.3.6.1.4.1.43.35.8.10.3 · 1 row entry · 1 columns

Open in standard view

Uses the a3com variant from /opt/observium/mibs/a3com.

Command help

Walk radioWdsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-PRIVATE-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-PRIVATE-MIB::radioWdsTable'

Table of configuration information for Wds for each
Radio interface.

radioWdsEntry row .1.3.6.1.4.1.43.35.8.10.3.1

An entry in the table, containing information
about configuration of peer Bridging
for one radio of the AP. The table is indexed by radio
Index (corresponding to enterpriseApRadioTable). The table does not contain …

Indexes

enterpriseApRadioIndex

Column Syntax OID

wdsApRole

This value indicates the role of the Ap for this radio: normal operation(1),
bridge master(2) which accepts only repeaters to associate with, repeater Ap(3) that
accepts wireless station and other repeaters if it is ro…

Enumerationr/w

Enumerated Values:

1	roleAp
2	roleBridgeMaster
3	roleRepeater
4	roleBridge

.1.3.6.1.4.1.43.35.8.10.3.1.1

radioWdsPeerTable

table

.1.3.6.1.4.1.43.35.8.10.4 · 1 row entry · 2 columns

Open in standard view

Uses the a3com variant from /opt/observium/mibs/a3com.

Command help

Walk radioWdsPeerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-PRIVATE-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-PRIVATE-MIB::radioWdsPeerTable'

Table of configuration information for Wds Peers for each
Radio interface.

radioWdsPeerEntry row .1.3.6.1.4.1.43.35.8.10.4.1

Indexes

enterpriseApRadioIndex wdsPeerIndex

Column	Syntax	OID
wdsPeerIndex Peer Index for the radio interface.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.43.35.8.10.4.1.1`
wdsPeerBssid The BSSID for this peer.	OctetStringr/w Constraints: `range: 1-6`	`.1.3.6.1.4.1.43.35.8.10.4.1.2`

rogueApDetectionTable

table

.1.3.6.1.4.1.43.35.8.13.1 · 1 row entry · 6 columns

Open in standard view

Uses the a3com variant from /opt/observium/mibs/a3com.

Command help

Walk rogueApDetectionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-PRIVATE-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-PRIVATE-MIB::rogueApDetectionTable'

Table of each AP that has been detected.

rogueApEntry row .1.3.6.1.4.1.43.35.8.13.1.1

An entry in the table, containing information
about any AP detected.

Indexes

rogueApIndex

Column	Syntax	OID
rogueApIndex Monotonically increasing index.	Integer32 Constraints: `range: 1-128`	`.1.3.6.1.4.1.43.35.8.13.1.1.1`
rogueApBssid The AP BSSID	OctetString Constraints: `range: 0-6`	`.1.3.6.1.4.1.43.35.8.13.1.1.2`
rogueApSsid The AP SSID	OctetString Constraints: `range: 0-40`	`.1.3.6.1.4.1.43.35.8.13.1.1.3`
rogueApPortNumber Interface index for the radio.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.43.35.8.13.1.1.4`
rogueApChannelNumber Channel where Ap detected.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.43.35.8.13.1.1.5`
rogueApRSSIValue RSSI for AP detected.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.43.35.8.13.1.1.6`