A3COM-HUAWEI-SUBNET-VLAN-MIB Table View

Subnet-based vlan configuration table.

h3cSubnetVlanEntry row .1.3.6.1.4.1.43.45.1.10.2.61.1.2.1

Subnet-based vlan configuration entry.

Indexes

h3cSubnetVlanVlanId h3cSubnetVlanSubnetIndex

Column	Syntax	OID
h3cSubnetVlanVlanId Vlan id.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.61.1.2.1.1
h3cSubnetVlanSubnetIndex The subnet index value of a row in this table is from zero to the value of h3cSubnetNumPerVlan subtracting one.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.61.1.2.1.2
h3cSubnetVlanVlanIpAddressType There are two kinds of ip address supported by vlan. One is ipv4, which is 32 bits. The other is ipv6, which is 128 bits.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.43.45.1.10.2.61.1.2.1.3
h3cSubnetVlanIpAddressValue The ip address of the configured subnet on vlan, including ipv4 and ipv6.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.43.45.1.10.2.61.1.2.1.4
h3cSubnetVlanNetMaskValue The net mask of the configured subnet on vlan, including ipv4 and ipv6.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.43.45.1.10.2.61.1.2.1.5
h3cSubnetVlanRowStatus The row status of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.61.1.2.1.6

Subnet-based vlan port table.
Add all subnet on vlan whose vlan id is h3cSubnetVlanPortInfoVlanId
into port at a draught.
All of the subnet information in this port is from the h3cSubnetVlanTable
above, with the value of h3cSubnetVlanPortInfoVlanId as an index,
which is h3cSubnetVlanVlanId in h3cSubnetVlanTable.

h3cSubnetVlanPortCreateEntry row .1.3.6.1.4.1.43.45.1.10.2.61.1.3.1

Subnet-based vlan port create entry.

Indexes

h3cSubnetVlanPortCreateIndex h3cSubnetVlanPortCreateVlanId

Column	Syntax	OID
h3cSubnetVlanPortCreateIndex The port index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.61.1.3.1.1
h3cSubnetVlanPortCreateVlanId The subnet-based vlan id. h3cSubnetVlanPortCreateVlanId refers to h3cSubnetVlanVlanId in h3cSubnetVlanTable. If h3cSubnetVlanPortCreateVlanId has no corresponding entry in h3cSubnetVlanTable, set operation will fail.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.61.1.3.1.2
h3cSubnetVlanPortInfoVlanId This vlaue is the same as the value of h3cSubnetVlanPortCreateVlanId index. All of the subnet information in this port, is described on vlan, whose vlan id is the value of h3cSubnetVlanPortInfoVlanId. The vlan id of vla…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.61.1.3.1.3
h3cSubnetVlanPortRowStatus The row status of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.61.1.3.1.4