A3COM-HUAWEI-SUBNET-VLAN-MIB

        This MIB contains the objects for managing the subnet-based vlan
configurations.
    
Source file
A3COM-HUAWEI-SUBNET-VLAN-MIB
Last revised
Identity
h3cSubnetVlan
Base OID
1.3.6.1.4.1.43.45.1.10.2.61
Imported Objects
A3COM-HUAWEI-OID-MIB h3cCommon
INET-ADDRESS-MIB InetAddress InetAddressType
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC RowStatus
Net-SNMP examples using the a3com MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'A3COM-HUAWEI-SUBNET-VLAN-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'A3COM-HUAWEI-SUBNET-VLAN-MIB::h3cSubnetVlan'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'A3COM-HUAWEI-SUBNET-VLAN-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'A3COM-HUAWEI-SUBNET-VLAN-MIB::h3cSubnetVlan'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (24)
.1.3.6.1.4.1.43.45.1.10.2.61
.1.3.6.1.4.1.43.45.1.10.2.61.1
.1.3.6.1.4.1.43.45.1.10.2.61.1.1
.1.3.6.1.4.1.43.45.1.10.2.61.1.1.1
.1.3.6.1.4.1.43.45.1.10.2.61.1.1.2
.1.3.6.1.4.1.43.45.1.10.2.61.1.1.3
.1.3.6.1.4.1.43.45.1.10.2.61.1.1.4
.1.3.6.1.4.1.43.45.1.10.2.61.1.2
.1.3.6.1.4.1.43.45.1.10.2.61.1.2.1
.1.3.6.1.4.1.43.45.1.10.2.61.1.2.1.1
.1.3.6.1.4.1.43.45.1.10.2.61.1.2.1.2
.1.3.6.1.4.1.43.45.1.10.2.61.1.2.1.3
.1.3.6.1.4.1.43.45.1.10.2.61.1.2.1.4
.1.3.6.1.4.1.43.45.1.10.2.61.1.2.1.5
.1.3.6.1.4.1.43.45.1.10.2.61.1.2.1.6
.1.3.6.1.4.1.43.45.1.10.2.61.1.3
.1.3.6.1.4.1.43.45.1.10.2.61.1.3.1
.1.3.6.1.4.1.43.45.1.10.2.61.1.3.1.1
.1.3.6.1.4.1.43.45.1.10.2.61.1.3.1.2
.1.3.6.1.4.1.43.45.1.10.2.61.1.3.1.3
.1.3.6.1.4.1.43.45.1.10.2.61.1.3.1.4
.1.3.6.1.4.1.43.45.1.10.2.61.2
.1.3.6.1.4.1.43.45.1.10.2.61.2.1
.1.3.6.1.4.1.43.45.1.10.2.61.2.2
Dependencies (6) 5 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (3)
A group of scalar objects describing the maximum number.
.1.3.6.1.4.1.43.45.1.10.2.61.2.2.1
A group of subnet vlan subnet.
.1.3.6.1.4.1.43.45.1.10.2.61.2.2.2
A group of subnet vlan port create table.
.1.3.6.1.4.1.43.45.1.10.2.61.2.2.3
Compliance Statements (1)

OID .1.3.6.1.4.1.43.45.1.10.2.61.2.1.1
The compliance statement for subnet vlan MIB.
Required groups