A3COM-HUAWEI-QINQ-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
23

h3cQinQBpduTunnelTable

table
.1.3.6.1.4.1.43.45.1.10.2.69.1.2 · 1 row entry · 2 columns
Open in standard view 
A table for configuring 802.1q BPDU tunnel function
for interfaces.
h3cQinQBpduTunnelEntry entry .1.3.6.1.4.1.43.45.1.10.2.69.1.2.1
An entry for configuring 802.1q BPDU tunnel function
for interfaces.
Indexes
RFC1213-MIBifIndex h3cQinQProtocolIndex
Column Syntax OID
h3cQinQProtocolIndex
The index of protocol on which the BPDU tunnel state
will be set. 'bpdu' represents status of BPDU tunnel.
'stp' represents STP tunnel. 'gvrp' represents GVRP
tunnel. 'igmp' represents IGMP tunnel. STP/GVRP/IGMP
tunnel …
Enumeration
Enumerated Values:
1bpdu
2stp
3gvrp
4igmp
 .1.3.6.1.4.1.43.45.1.10.2.69.1.2.1.1
h3cQinQBpduRowStatus
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.45.1.10.2.69.1.2.1.2

h3cQinQPriorityRemarkTable

table
.1.3.6.1.4.1.43.45.1.10.2.69.1.3 · 1 row entry · 3 columns
Open in standard view 
A table for configuring priority field in 802.1Q-in-Q
outer VLAN tag for interfaces. This feature uses the
priority of an inner VLAN tag to remark the priority
of an outer VLAN tag.
h3cQinQPriorityRemarkEntry entry .1.3.6.1.4.1.43.45.1.10.2.69.1.3.1
An entry for configuring priority remark function for
interfaces.
Indexes
RFC1213-MIBifIndex h3cQinQPriorityValue
Column Syntax OID
h3cQinQPriorityValue
The priority value in inner VLAN tag. Since the priority
range is from 0 to 7, yet the index range is from 1 to 8.
Thus, the actual priority value equals to the value that
subtracts 1 from corresponding index value.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.43.45.1.10.2.69.1.3.1.1
h3cQinQPriorityRemarkValue
The new priority value used to fill outer tag.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.43.45.1.10.2.69.1.3.1.2
h3cQinQPriorityRowStatus
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.45.1.10.2.69.1.3.1.3

h3cQinQVidTable

table
.1.3.6.1.4.1.43.45.1.10.2.69.1.4 · 1 row entry · 5 columns
Open in standard view 
A table for configuring VLAN ID of the 802.1Q-in-Q
interfaces.
h3cQinQVidEntry entry .1.3.6.1.4.1.43.45.1.10.2.69.1.4.1
An entry for configuring VLAN ID of the 802.1Q-in-Q
interfaces.
Indexes
RFC1213-MIBifIndex h3cQinQVlanID
Column Syntax OID
h3cQinQVlanID
VLAN ID
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.43.45.1.10.2.69.1.4.1.1
h3cQinQInboundVidListLow
The inbound VLAN IDs which need 802.1Q-in-Q processing.
The VLAN ID range, described by bitmap, is from 1 to
2048. The length of bitmap is 256 in bytes. Each octet
within this value specifies a set of eight VLANs, with
…
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.43.45.1.10.2.69.1.4.1.2
h3cQinQInboundVidListHigh
The inbound VLAN IDs which need 802.1Q-in-Q processing.
The VLAN ID range, described by bitmap, is from 2049 to
4094. The length of bitmap is 256 in bytes. Each octet
within this value specifies a set of eight VLANs, wi…
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.43.45.1.10.2.69.1.4.1.3
h3cQinQVidEthernetType
Ethernet protocol type configuring for a VLAN.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.45.1.10.2.69.1.4.1.4
h3cQinQVidRowStatus
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.45.1.10.2.69.1.4.1.5

h3cQinQVidSwapTable

table
.1.3.6.1.4.1.43.45.1.10.2.69.1.5 · 1 row entry · 3 columns
Open in standard view 
A table for configuring 802.1Q-in-Q inner VLAN ID
swapping function for interfaces.
h3cQinQVidSwapEntry entry .1.3.6.1.4.1.43.45.1.10.2.69.1.5.1
An entry for configuring 802.1Q-in-Q inner VLAN ID
swapping function for interfaces.
Indexes
RFC1213-MIBifIndex h3cQinQVlanID h3cQinQVidSwapOld
Column Syntax OID
h3cQinQVidSwapOld
The old VLAN ID of original 802.1Q packets.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.43.45.1.10.2.69.1.5.1.1
h3cQinQVidSwapNew
The new VLAN ID of original 802.1Q packets.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.43.45.1.10.2.69.1.5.1.2
h3cQinQVidSwapRowStatus
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.45.1.10.2.69.1.5.1.3

h3cQinQPrioritySwapTable

table
.1.3.6.1.4.1.43.45.1.10.2.69.1.6 · 1 row entry · 3 columns
Open in standard view 
A table for configuring 802.1Q-in-Q inner VLAN priority
swapping function for interfaces. Using this function,
the priority of inner VLAN tag can be modified.
h3cQinQPrioritySwapEntry entry .1.3.6.1.4.1.43.45.1.10.2.69.1.6.1
An entry for configuring 802.1Q-in-Q inner VLAN
priority swapping function for interfaces.
Indexes
RFC1213-MIBifIndex h3cQinQVlanID h3cQinQPrioritySwapOld
Column Syntax OID
h3cQinQPrioritySwapOld
The old priority of original 802.1Q packets. It is the
priority of inner VLAN tag. Since the VLAN priority range
is from 0 to 7, yet the index range is from 1 to 8. Thus,
the actual priority value equals to the value th…
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.43.45.1.10.2.69.1.6.1.1
h3cQinQPrioritySwapNew
The new priority of original 802.1Q packets. It is the
priority of inner VLAN tag after swapped.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.43.45.1.10.2.69.1.6.1.2
h3cQinQPrioritySwapRowStatus
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.45.1.10.2.69.1.6.1.3

h3cQinQIfConfigTable

table
.1.3.6.1.4.1.43.45.1.10.2.69.1.7 · 1 row entry · 7 columns
Open in standard view 
A table for configuring 802.1Q-in-Q functions for
interfaces.
h3cQinQIfConfigEntry entry .1.3.6.1.4.1.43.45.1.10.2.69.1.7.1
An entry for configuring 802.1Q-in-Q functions for
interfaces.
Indexes
Column Syntax OID
h3cQinQIfEthernetType
Ethernet protocol type configuring for an interface.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.45.1.10.2.69.1.7.1.1
h3cQinQIfSwitch
Switch of 802.1Q-in-Q functions configuring for an
interface.
H3cQinQSwitchStater/w
Textual Convention: H3cQinQSwitchState Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.43.45.1.10.2.69.1.7.1.2
h3cQinQIfRowStatus
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.45.1.10.2.69.1.7.1.3
h3cQinQIfServiceTPIDValue
Service TPID value configured for an interface.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.45.1.10.2.69.1.7.1.4
h3cQinQIfCustomerTPIDValue
Customer TPID value configured for an interface.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.45.1.10.2.69.1.7.1.5
h3cQinQIfUplinkSwitch
Switch of the uplink 802.1Q-in-Q function
for an interface.
H3cQinQSwitchStater/w
Textual Convention: H3cQinQSwitchState Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.43.45.1.10.2.69.1.7.1.6
h3cQinQIfDownlinkSwitch
Switch of the downlink 802.1Q-in-Q function
for an interface.
H3cQinQSwitchStater/w
Textual Convention: H3cQinQSwitchState Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.43.45.1.10.2.69.1.7.1.7