A3COM-HUAWEI-NAT-MIB Table View

NAT address pool table : The address in the pool is
the IP address in the global network. The pool can span
255 IP addresses.All address pools configured by administrator
are recorded in this table.

h3cNATPoolInfoEntry row .1.3.6.1.4.1.43.45.1.10.2.18.2.1.1

The entry of NAT address pool table.

Indexes

h3cNATPoolIdx

Column	Syntax	OID
h3cNATPoolIdx Index of the address pool: The index uniquely indicates the address pool in the system, and its range is from 1 to 320.	Integer32 Constraints: range: 1-320	.1.3.6.1.4.1.43.45.1.10.2.18.2.1.1.1
h3cNATPoolStartIpAddr The start IP address of address pool: It must be less than or equal to the end IP address.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.10.2.18.2.1.1.2
h3cNATPoolEndIpAddr The end IP address of address pool: It must be more than or equal to the start IP address.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.10.2.18.2.1.1.3
h3cNATPoolSlotNo The number of NAT board to which the address pool is bound. The address translation is processed by this NAT board . The relation between address pool and slotNo is n:1. When the address pool is not bound to the NAT boa…	Integer32r/w Constraints: range: 255-255 range: 1-14	.1.3.6.1.4.1.43.45.1.10.2.18.2.1.1.4
h3cNATPoolRefCounter The counter of reference. A address pool can be associated with more than one ACL and the counter of reference is recorded in this field. When the address pool is not associated with ACL, the value is 0.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.18.2.1.1.5
h3cNATPoolRowStatus Only support 'destroy' and 'createAndGo'. If h3cNATPoolIdx, h3cNATPoolStartIpAddr and h3cNATPoolEndIpAddr were provided correctly, its value is changed 'active'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.18.2.1.1.6

NAT out bound table: through associating ACL number,
address pool with NAT board, administrator can designate
which inside IP address can be translated to global IP
address in the pool and the translation is processed by
which NAT board.

h3cNATOutboundEntry row .1.3.6.1.4.1.43.45.1.10.2.18.2.2.1

The entry of NAT out bound table.

Indexes

RFC1213-MIBifIndex h3cNATOutboundAclNo

Column	Syntax	OID
h3cNATOutboundAclNo The number of ACL(Access Control List). When the packet accords with the rule in the ACL, its source IP address will be translated to IP address in Address pool.	Integer32 Constraints: range: 2000-3999	.1.3.6.1.4.1.43.45.1.10.2.18.2.2.1.1
h3cNATOutboundPoolIdx The index of address pool in h3cNATPoolInfoTable. when administrator doesn't use the address pool and use the IP address of the interface as the address of global network, the value is 2147483647.	Integer32r/w Constraints: range: 0-320 range: 2147483647-2147483647	.1.3.6.1.4.1.43.45.1.10.2.18.2.2.1.2
h3cNATOutboundIsNoPat Whether to use no pat manner. The translation of no pat is that the translation doesn't use the port information of packet.	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.43.45.1.10.2.18.2.2.1.3
h3cNATOutboundSlotNo The number of NAT board. In router, the value is 255 because no NAT board in it.	Integer32r/w Constraints: range: 1-14 range: 255-255	.1.3.6.1.4.1.43.45.1.10.2.18.2.2.1.4
h3cNATOutboundRowStatus Only support 'destroy' and 'createAndGo'. If h3cNATOutboundAclNo or h3cNATOutboundAclNo and h3cNATOutboundPoolIdx were provided correctly, its value is changed 'active'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.18.2.2.1.5

NAT inside Server Table.  Administrator can configure server in the
private network which can provide service for people in the public network.
The translation map is :
(InsideIP     , InsidePort--> GlobalIP, GlobalPort    )
(InsideIP + 1 , InsidePort--> GlobalIP, GlobalPort + 1)
(InsideIP + 2 , InsidePort--> GlobalIP, GlobalPort + 2)
...
...
...
(InsideIP+n(=InsideIP2),InsidePort--> GlobalIP,GlobalPort+n(=GlobalPort2))

h3cNATServerEntry row .1.3.6.1.4.1.43.45.1.10.2.18.2.3.1

The entry of NAT inside server table.

Indexes

RFC1213-MIBifIndex h3cNATServerProType h3cNATServerGlobalIP h3cNATServerStartGlobalPort h3cNATServerVpnIndex

Column	Syntax	OID
h3cNATServerProType The type of protocol: icmp(1), tcp(6), udp(17) and others.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.43.45.1.10.2.18.2.3.1.1
h3cNATServerGlobalIP The global IP address of Inside Server.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.10.2.18.2.3.1.2
h3cNATServerStartGlobalPort The start global port of Inside Server. When the port need not be configured, the value is 0.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.45.1.10.2.18.2.3.1.3
h3cNATServerEndGlobalPort The end global port of Inside Server. When administrator doesn't configure a series of inside server, the value is 0. If the value is not zero, the value of (GlobalPort2-GlobalPort) must be equal to (InsideIP2 - Inside…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.43.45.1.10.2.18.2.3.1.4
h3cNATServerStartInsideIP The start private IP address of Inside Server.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.10.2.18.2.3.1.5
h3cNATServerEndInsideIP The end private IP address of Inside Server. When administrator doesn't configure a series of inside server, the value is 0.0.0.0.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.10.2.18.2.3.1.6
h3cNATServerInsidePort The private port of Inside Server.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.43.45.1.10.2.18.2.3.1.7
h3cNATServerSlotNo The number of NAT board. In router, the value is 255 because no NAT board in it.	Integer32r/w Constraints: range: 1-14 range: 255-255	.1.3.6.1.4.1.43.45.1.10.2.18.2.3.1.8
h3cNATServerVpnIndex The VPN index of server.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.45.1.10.2.18.2.3.1.10
h3cNATServerAclNumber Number of basic or advanced acl.	Integer32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.43.45.1.10.2.18.2.3.1.11
h3cNATServerRowStatus Only support 'destroy' and 'createAndGo'. If h3cNATServerProType, h3cNATServerGlobalIP, h3cNATServerGlobalPort and h3cNATServerInsideIP were provided correctly, its value is changed 'active'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.18.2.3.1.12

NAT Time out Table. When a connection is established,
if there are not any actives in this connection between
the time, it will be disconnected.

h3cNATTimeOutEntry row .1.3.6.1.4.1.43.45.1.10.2.18.2.4.1

The entry of NAT Time out Table.

Indexes

h3cNATTimeOutProtocol

Column	Syntax	OID
h3cNATTimeOutProtocol The type of protocol.	Enumeration Enumerated Values: 1 tcp 2 udp 3 icmp 4 pptp 5 dns 6 tcpFin 7 tcpSyn 8 ftpCtrl 9 ftpData	.1.3.6.1.4.1.43.45.1.10.2.18.2.4.1.1
h3cNATTimeOutTimeValue The time of time out.	Integer32r/w Constraints: range: 10-86400	.1.3.6.1.4.1.43.45.1.10.2.18.2.4.1.2

NAT blacklist function Enable Table.  In this table, administrator can decide
whether to start the function of blacklist in the NAT board.
When the function of blacklist can't be set for a NAT board,
the number of NAT board is 256.

h3cNATBLEnableEntry row .1.3.6.1.4.1.43.45.1.10.2.18.2.5.1

The entry of NAT blacklist Enable Table.

Indexes

h3cNATBLEnableSlotNo

Column	Syntax	OID
h3cNATBLEnableSlotNo The number of NAT board. When the function of blacklist can't be set for a NAT board, the value is 255.	Integer32 Constraints: range: 1-14 range: 255-255	.1.3.6.1.4.1.43.45.1.10.2.18.2.5.1.1
h3cNATBLEnable Start or stop of function of balcklist.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.43.45.1.10.2.18.2.5.1.2

The table of connection control of special IP address.  In this table, administrator can decide to
adopt which manner to control the connection which IP address is the
special IP address.

h3cNATBLIPConnectLimitParaEntry row .1.3.6.1.4.1.43.45.1.10.2.18.2.6.1

The entry of the table of connection control of special IP address.

Indexes

h3cNATBLIPConnectLimitParaIP

Column	Syntax	OID
h3cNATBLIPConnectLimitParaIP The special IP address. The IP is private IP address.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.10.2.18.2.6.1.1
h3cNATBLIPConnectHighValue The maximal connection amount. It must be more than the minimal connection amount.	Integer32r/w Constraints: range: 20-20000	.1.3.6.1.4.1.43.45.1.10.2.18.2.6.1.2
h3cNATBLIPConnectLowValue The minimal connection amount. It must be less than the maximal connection amount.	Integer32r/w Constraints: range: 20-20000	.1.3.6.1.4.1.43.45.1.10.2.18.2.6.1.3
h3cNATBLIPUseSpecialConnectRate Whether to use the special connection rate control.	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.43.45.1.10.2.18.2.6.1.4
h3cNATBLIPConnectLimitRowStatus Only support 'destroy' and 'createAndGo'. If h3cNATBLIPConnectHighValue, h3cNATBLIPConnectLowValue and h3cNATBLIPUseSpecialConnectRate were provided correctly, its value is changed 'active'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.18.2.6.1.5

The management table of blacklist.
The table doesn't support 'getnext' operation.

h3cNATBLManagerEntry row .1.3.6.1.4.1.43.45.1.10.2.18.2.7.1

The entry of management table of blacklist.

Indexes

h3cNATBLIpAdress h3cNATBLSlotNo

Column	Syntax	OID
h3cNATBLIpAdress The IP address of entry of blacklist.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.10.2.18.2.7.1.1
h3cNATBLSlotNo The number of NAT board.	Integer32 Constraints: range: 1-14	.1.3.6.1.4.1.43.45.1.10.2.18.2.7.1.2
h3cNATBLConSum The connection amount.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.18.2.7.1.3
h3cNATBLConSpd The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the conneciton rate is below the lower limit.	Enumeration Enumerated Values: 1 red 2 yellow 3 green	.1.3.6.1.4.1.43.45.1.10.2.18.2.7.1.4

The statistics information table of NAT module.

h3cNATStatEntry row .1.3.6.1.4.1.43.45.1.10.2.18.2.8.1

The entry of statistics information table of NAT module.

Indexes

h3cNATStatNATBoardNo

Column	Syntax	OID
h3cNATStatNATBoardNo The number of NAT board. In router, the value is 255 because no NAT board in it.	Integer32 Constraints: range: 1-14 range: 255-255	.1.3.6.1.4.1.43.45.1.10.2.18.2.8.1.1
h3cNATStatActiveTblCount Active PAT session count In software.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.18.2.8.1.2
h3cNATStatActiveTblCountInNP Active PAT session count In NP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.18.2.8.1.3
h3cNATStatActiveNatTblCount Active NO-PAT session count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.18.2.8.1.4
h3cNATStatActiveSvrTblCount Active SERVER session count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.18.2.8.1.5
h3cNATStatActivePoolTblCount Active address pool session count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.18.2.8.1.6
h3cNATStatNumOfUsedPort The number of used port in NP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.18.2.8.1.7
h3cNATStatNumOfGoodPkt The number of good packet in NP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.18.2.8.1.8
h3cNATStatNumOfBadPkt The number of bad packet in NP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.18.2.8.1.9
h3cNATStaticSessionCount Active STATIC session count.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.18.2.8.1.10
h3cNATFragmentSessionCount Active fragment packet session count.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.18.2.8.1.11
h3cNATSequenceSessionCount Active session table count hash by private IP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.18.2.8.1.12
h3cNATLogCount Buffered Nat LOG table count.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.18.2.8.1.13

The nat session information table.  There is the address translation information in the table.
The sketch map of connection is
pc1(private Net)------------------>NAT Device ------------------>Server(public Net)
InsideIP, InsidePort---->translating to GlobalIP, GlobalPort------>PeerIP, PeerPort.

h3cNATSessionEntry row .1.3.6.1.4.1.43.45.1.10.2.18.2.9.1

The entry of session information table.

Indexes

h3cNATSessionHashNumber h3cNATSessionProtocol h3cNATSessionInsideIP h3cNATSessionInsidePort h3cNATSessionPeerIP h3cNATSessionPeerPort h3cNATSessionVpnIndex

Column	Syntax	OID
h3cNATSessionHashNumber The row number of the hash table.	Integer32 Constraints: range: 1-300000	.1.3.6.1.4.1.43.45.1.10.2.18.2.9.1.1
h3cNATSessionProtocol The protocol type of session.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.43.45.1.10.2.18.2.9.1.2
h3cNATSessionGlobalIP The global IP of session.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.10.2.18.2.9.1.3
h3cNATSessionGlobalPort The global port of session.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.45.1.10.2.18.2.9.1.4
h3cNATSessionInsideIP The Inside IP of session.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.10.2.18.2.9.1.5
h3cNATSessionInsidePort The Inside port of session.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.45.1.10.2.18.2.9.1.6
h3cNATSessionPeerIP The peer IP of session.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.10.2.18.2.9.1.7
h3cNATSessionPeerPort The peer port of session.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.45.1.10.2.18.2.9.1.8
h3cNATSessionVpnIndex The VPN index of session.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.43.45.1.10.2.18.2.9.1.9
h3cNATSessionTTL The TTL of session.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.18.2.9.1.10
h3cNATSessionStatus The status of session.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.18.2.9.1.11
h3cNATSessionLeftTime The Left time of session.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.18.2.9.1.12

Static Nat configuration table.

h3cNATStaticConfEntry row .1.3.6.1.4.1.43.45.1.10.2.18.2.10.1

Configure static Nat.

Indexes

h3cNATStaticInsideIp

Column	Syntax	OID
h3cNATStaticInsideIp Inside ip address.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.10.2.18.2.10.1.1
h3cNATStaticGlobalIp Global Ip address.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.10.2.18.2.10.1.2
h3cNATStaticRowStatus Only support 'destroy' and 'createAndGo'. If h3cNATStaticInsideIp and h3cNATStaticGlobalIp were provided correctly, its value is changed 'active'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.18.2.10.1.3

Active the static Nat on interface.

h3cNATStaticEnableEntry row .1.3.6.1.4.1.43.45.1.10.2.18.2.11.1

Active the static Nat on interface.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
h3cNATStaticEnable Enable/disable the static Nat on the interface(h3cNatStaticEnableIfIndex). disable (0) enable (1)	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.43.45.1.10.2.18.2.11.1.2

This table is used to set mapping of DNS.

h3cNATDnsMapEntry row .1.3.6.1.4.1.43.45.1.10.2.18.2.12.1

The entry of h3cNATDnsMapTable.

Indexes

h3cNATDnsMapDomainName

Column	Syntax	OID
h3cNATDnsMapDomainName Domain name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.43.45.1.10.2.18.2.12.1.1
h3cNATDnsMapGlobalIp Global IP address.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.10.2.18.2.12.1.2
h3cNATDnsMapGlobalPort Global port number.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.43.45.1.10.2.18.2.12.1.3
h3cNATDnsMapProtocolType TCP Transmission Control Protocol. UDP User Datagram Protocol.	Enumerationr/w Enumerated Values: 0 any 1 typeTCP 2 typeUDP	.1.3.6.1.4.1.43.45.1.10.2.18.2.12.1.4
h3cNATDnsMapLastUseTime Its value is the time that the device uses from startup to last use 'Dns Map'record. If the value is 0,the device never use this record.	RFC1155-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.18.2.12.1.5
h3cNATDnsMapRowStatus Only support 'destroy' and 'createAndGo'. If h3cNATDnsMapDomainName, h3cNATDnsMapGlobalIp and h3cNATDnsMapGlobalPortor h3cNATDnsMapDomainName, h3cNATDnsMapGlobalIp, h3cNATDnsMapGlobalPort and h3cNATDnsMapProtocolType we…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.18.2.12.1.6