A3COM-HUAWEI-IF-EXT-MIB Table View

This table contains objects to get statistic information
of interfaces on a device.

h3cIfStatEntry row .1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1

Entry items

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cIfStatFlowInterval Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.1
h3cIfStatFlowInBits In bits in the specific interval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.2
h3cIfStatFlowOutBits Out bits in specific interval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.3
h3cIfStatFlowInPkts In Packets in the specific interval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.4
h3cIfStatFlowOutPkts Out packets in the specific interval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.5
h3cIfStatFlowInBytes In bytes in the specific interval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.6
h3cIfStatFlowOutBytes Out bytes in the specific interval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.1.1.7

This table contains objects to get average speed information
in the specific interval of interfaces on a device.

h3cIfSpeedStatEntry row .1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1

Entry items

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cIfSpeedStatInterval Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.1
h3cIfSpeedStatInPkts Average of input packets per second in the specific interval by h3cIfSpeedStatInterval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.2
h3cIfSpeedStatOutPkts Average of output packets per second in the specific interval by h3cIfSpeedStatInterval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.3
h3cIfSpeedStatInBytes Average of input bytes per second in the specific interval by h3cIfSpeedStatInterval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.4
h3cIfSpeedStatOutBytes Average of output bytes per second in the specific interval by h3cIfSpeedStatInterval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.2.1.5

This table contains objects to get statistic information
of interfaces on a device.

h3cIfHCFlowStatEntry row .1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1

Entry items

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cIfStatFlowHCInBits In bits in the specific interval. This object is a 64-bit version of h3cIfStatFlowInBits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.1
h3cIfStatFlowHCOutBits Out bits in specific interval. This object is a 64-bit version of h3cIfStatFlowOutBits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.2
h3cIfStatFlowHCInPkts In Packets in the specific interval. This object is a 64-bit version of h3cIfStatFlowInPkts.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.3
h3cIfStatFlowHCOutPkts Out packets in the specific interval. This object is a 64-bit version of h3cIfStatFlowOutPkts.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.4
h3cIfStatFlowHCInBytes In bytes in the specific interval. This object is a 64-bit version of h3cIfStatFlowInBytes.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.5
h3cIfStatFlowHCOutBytes Out bytes in the specific interval. This object is a 64-bit version of h3cIfStatFlowOutBytes.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.43.45.1.10.2.40.2.1.2.3.1.6

This table contains all interfaces that can create sub
interface.

h3cRTParentIfEntry row .1.3.6.1.4.1.43.45.1.10.2.40.2.2.1.1

This entry describes a interface that can create sub
interface.

Indexes

h3cRTParentIfIndex

Column	Syntax	OID
h3cRTParentIfIndex The index of interface that can creat sub interface. The value is the same as ifIndex value for this interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.40.2.2.1.1.1
h3cRTMinSubIfOrdinal The minimum ordinal of the sub interface can be created.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.40.2.2.1.1.2
h3cRTMaxSubIfOrdinal The max ordinal of the sub interface can be created.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.40.2.2.1.1.3

This table contains objects to create or delete sub interfaces.
To create a sub interface, a valid parent interface must be
specified by h3cRTSubIfParentIfIndex and the h3cRTSubIfOrdinal
must be in the range between h3cRTMinSubIfOrdinal and
h3cRTMaxSubIfOrdinal of the parent interface from
h3cRTParentIfTable.
          
Sub interfaces are logical virtual interfaces configured on a
main interface.  The main interface can be either a physical
interface (such as a Layer 3 Ethernet interface) or a logical
interface (such as an MFR interface).  The subinterfaces on a
main interface share the physical layer parameters of the main
interface but can have link layer and network layer parameters
of their own.  Disabling or enabling a subinterface does not
affect the main interface, but the main interface status change
affects the subinterfaces.  The subinterfaces cannot operate
normally unless the main interface is connected.
A single physical interface containing multiple subinterfaces
enables you to network in a more flexible way.
          
You can create subinterfaces for the following physical
interfaces:
Ethernet interface.  An Ethernet subinterface associated with no
VLAN supports only IPX, while an Ethernet subinterface associated
with a VLAN supports both IP and IPX.
WAN interfaces with their data link layer protocols being frame
relay, whose subinterfaces support IP and IPX.
WAN interfaces with their data link layer protocols being X.25,
whose subinterfaces support IP and IPX.
ATM interface, whose subinterfaces support only IP.

h3cRTSubIfEntry row .1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1

The h3cRTSubIfTable entry items

Indexes

h3cRTSubIfParentIfIndex h3cRTSubIfOrdinal

Column	Syntax	OID
h3cRTSubIfParentIfIndex The parent interface index. The value should be the same as the h3cRTParentIfIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.1
h3cRTSubIfOrdinal The ordinal of sub interface. It should between h3cRTMinSubIfOrdinal and h3cRTMaxSubIfOrdinal of the parent interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.2
h3cRTSubIfSubIfIndex The ifIndex value of the sub interface	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.3
h3cRTSubIfSubIfDesc The name of the interface	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.4
h3cRTSubIfRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.40.2.2.2.1.5

This table contains objects to get or set the link mode of an
interface.
According to the layer at which the device processes received
data packets, Ethernet interfaces can operate in bridge or route
mode.

h3cIfLinkModeEntry row .1.3.6.1.4.1.43.45.1.10.2.40.2.2.3.1

The interface link mode table entry

Indexes

h3cIfLinkModeIndex

Column	Syntax	OID
h3cIfLinkModeIndex The value is same as ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.40.2.2.3.1.1
h3cIfLinkMode The current link mode of the interface If h3cIfLinkModeSwitchSupport is true, writing to the object can change the link mode of the interface.	Enumerationr/w Enumerated Values: 1 bridgeMode 2 routeMode	.1.3.6.1.4.1.43.45.1.10.2.40.2.2.3.1.2
h3cIfLinkModeSwitchSupport Whether the interface supports link mode switching. If this object is true, the interface can operate in either bridge mode or route mode. Otherwise the interfaces can operate only in bridge or route mode.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.40.2.2.3.1.3

A list of interface entries.  The number of entries is given by
the value of IfNumber.

h3cIfEntry row .1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1

An entry containing management information applicable to a
particular interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cIfUpDownTimes The interface's up/down times, since the device was initialized.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.1
h3cIfMtu The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram, this is the size of the largest network datagram that c…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.2
h3cIfBandwidthRate The rate of the bandwidth for an interface.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.3
h3cIfDiscardPktRate The rate of the discarded packets for an interface.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.4
h3cIfStatusKeepTime The time since the interface entered its current operational state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.5
h3cIfInNUcastPkts The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.6
h3cIfOutNUcastPkts The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.7
h3cIfIsPoe Whether the interface supports poe.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.40.2.3.2.1.8

The trap configuration table.

h3cIfExtTrapCfgEntry row .1.3.6.1.4.1.43.45.1.10.2.40.3.1.1.1

An entry for this table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cIfBandwidthUpperLimit The rate of the bandwidth upper limit for an interface.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.43.45.1.10.2.40.3.1.1.1.1
h3cIfDiscardPktRateUpperLimit The rate of the discarded packets upper limit for an interface.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.43.45.1.10.2.40.3.1.1.1.2