A3COM-HUAWEI-FLASH-MAN-MIB Table View

This table gives the properties of all the flashes on
the system.

h3cFlashEntry row .1.3.6.1.4.1.43.45.1.6.9.1.1.2.1

The entry of h3cFlashTable.

Indexes

No indexes recorded

Column	Syntax	OID
h3cFlhIndex The index of h3cFlashTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + random index + + ( bi…	Integer32	.1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.1
h3cFlhSize Specifies the total size of the flash device indexed by h3cFlhIndex. The value should be zero if the flash is removed for a removable device.	bytesSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.2
h3cFlhPos The position of the flash device in system. This object is an index of entPhysicalTable in ENTITY-MIB. If the value of this object is 0, the main processor is indicated.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.3
h3cFlhName The flash name within the system.	OctetString	.1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.4
h3cFlhChipNum The chip numbers in the flash.	Integer32	.1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.5
h3cFlhDescr Description of the purpose of the flash in the system.	OctetString	.1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.6
h3cFlhInitTime The initialization time for the flash component or partition, recorded using the system time. This will be the boot time for a fixed device. For a removable component or a partition, it will be the initialization time.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.8
h3cFlhRemovable The value indicates whether the flash indexed can be removed or not. The true(1) value indicates the flash device CAN be removed.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.9
h3cFlhPartitionBool The value indicates whether the flash indexed can be partitioned or not. The true(1) value indicates the flash CAN be partitioned.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.11
h3cFlhMinPartitionSize Minimum partition size supported. If h3cFlhDevicePartitionBool is false, the value of this object is the same as h3cFlhSize.	bytesSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.12
h3cFlhMaxPartitions The maximum count of partitions which the system supports for this flash. If h3cFlhPartitionBool is false, the object value is 1.	Integer32	.1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.13
h3cFlhPartitionNum The actual number of partitions supported by the system for this flash. If h3cFlhPartitionBool is false, this value is 1.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.14
h3cFlhKbyteSize Specifies the total size of the flash device indexed by h3cFlhIndex. The value should be zero if the flash is removed for a removable device.	kbytesSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.15

Table of properties for all flash chips.
Used mainly for diagnostics.

h3cFlhChipEntry row .1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1

The entry of h3cFlhChipTable

Indexes

No indexes recorded

Column	Syntax	OID
h3cFlhChipSerialNo Index of h3cFlhChipTable.	Integer32	.1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.1
h3cFlhChipID The manufacturer code (the upper byte) and device code (the lower byte) for a chip. Unknown chip code is presented as 00:00.	OctetString	.1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.2
h3cFlhChipDescr The description of the flash chip.	OctetString	.1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.3
h3cFlhChipWriteTimesLimit The limit for the number of write times (retries) for a flash chip. If the limit is exceeded an error should be reported by the management station.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.4
h3cFlhChipWriteTimes A count of write times (retries) for the flash chip since initialization. A count of 25 or more for a single chip indicates a write error. Management stations should note the value of this MIB before and after a write o…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.5
h3cFlhChipEraseTimesLimit The limit for the number of erase times (retries) for a flash chip. If the limit is exceeded an error should be reported by the management station.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.6
h3cFlhChipEraseTimes A count of erase times (retries) for the flash chip since initialization. A count of 2000 or more for a single chip indicates a write error. Management stations should note the value of this MIB before and after an eras…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.7

Properties for the flash partitions. Minimum of one entry in
this table.

h3cFlhPartitionEntry row .1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1

An entry of the h3cFlhPartitionTable.Indexed by flash
number and partition number.

Indexes

No indexes recorded

Column	Syntax	OID
h3cFlhPartIndex An index which specifies a sequenced partition in the system.	Integer32	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.1
h3cFlhPartFirstChip The first chip's sequence number in the partition, by which a chip can be indexed in chip table.	Integer32	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.2
h3cFlhPartLastChip The last chip's sequence number in the partition, by which a chip can be indexed in chip table.	Integer32	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.3
h3cFlhPartSpace The total space of the flash partition. The following should be satisfied: h3cFlhPartSpace = n*h3cFlhMinPartitionSize	bytesSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.4
h3cFlhPartSpaceFree The flash partition's free space.	bytesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.5
h3cFlhPartFileNum The number of all the files in the flash partition.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.6
h3cFlhPartChecksumMethod The Checksum method which the file system uses.	Enumeration	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.7
h3cFlhPartStatus The flash partition status.	H3cFlashPartitionStatus Type Values: 1 readOnly 2 runFromFlash 3 readWrite	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.8
h3cFlhPartUpgradeMode The upgrade mode of the Flash partition	H3cFlashPartitionUpgradeMode Type Values: 1 unknown 2 rxbootFLH 3 direct	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.9
h3cFlhPartName The name of the flash partition given by the system.	OctetString	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.10
h3cFlhPartRequireErase Shows whether a write operation is conditional on partition erase.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.11
h3cFlhPartFileNameLen The maximum length of file name supported in the system.	Integer32	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.12

Table of file information.

h3cFlhFileEntry row .1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1

An entry representing a file. Indexed using flash number,
partition number, and file number.

Indexes

No indexes recorded

Column	Syntax	OID
h3cFlhFileIndex Index of the table, whose range is from 1 to 2147483647	Integer32	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.1
h3cFlhFileName A valid file name supported by the file system.	OctetString	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.2
h3cFlhFileSize The file size in bytes excluding the file header of file system. The value should be greater than zero.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.3
h3cFlhFileStatus The status should be as follows: deleted(1): The file is in recycle bin. invalidChecksum(2): The checksum of file is invalid; valid(3): A valid file.	Enumeration	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.4
h3cFlhFileChecksum The file checksum in the header of file.	OctetString	.1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.5

Table used to operate flash.

h3cFlhOpEntry row .1.3.6.1.4.1.43.45.1.6.9.1.2.1.1

Note an operation can not be stopped until it is finished.

If notification is configured, NMS will receive a notification
at the end of the operation.

Entries in the table will be removed autom…

Indexes

No indexes recorded

Column	Syntax	OID
h3cFlhOperIndex Specifies the index of an entry. It is a random value when creating an entry.	Integer32	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.1
h3cFlhOperType Specifies the operation to be executed. net2FlashWithErase Copy a file to flash; erase flash beforehand. net2FlashWithoutErase Copy a file to flash; do not erase flash before…	Enumerationr/w	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.2
h3cFlhOperProtocol Specifies the protocol used to transfer file. The default protocol is ftp. when 'clusterftp' or 'clustertftp' is selected, the h3cFlhOperServerAddress needn't be set, the server address can be acquired au…	Enumerationr/w	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.3
h3cFlhOperServerAddressdeprecated The address of remote host acting as server for operation. The default value is 255.255.255.255 This object is replaced by h3cFlhOperSrvAddrRev for it only support IPv4.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.4
h3cFlhOperServerUser When using ftp to transfer files, the user name must be specified through this node.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.5
h3cFlhOperPassword Remote user password for copying via ftp protocol. Optionally, This object may be ignored for protocols other than ftp.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.6
h3cFlhOperSourceFile Specifies the source file name to be transferred. It may be located on flash or remote server. It may include the file path if it is applicable. It must be specified.	OctetStringr/w	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.7
h3cFlhOperDestinationFile Specifies the destination file name. It may be located on flash or remote server. It may include the file path if it is applicable. If it is not specified, the destination file name is the same as source file name for a…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.8
h3cFlhOperStatus The status of operation.	H3cFlashOperationStatus Type Values: 1 opInProgress 2 opSuccess 3 opInvalid 4 opInvalidProtocol 5 opInvalidSourceName 6 opInvalidDestName 7 opInvalidServerAddress 8 opDeviceBusy 9 opDeviceOpenError 10 opDeviceError 11 opDeviceNotProgrammable 12 opDeviceFull 13 opFileOpenError 14 opFileTransferError 15 opFileChecksumError 16 opNoMemory 17 opAuthFail 18 opTimeout 19 opUnknownFailure 20 opDeleteFileOpenError 21 opDeleteInvalidDevice 22 opDeleteInvalidFunction 23 opDeleteOperationError 24 opDeleteInvalidFileName 25 opDeleteDeviceBusy 26 opDeleteParaError 27 opDeleteInvalidPath 28 opDeleteFileNotExistInSlave 29 opDeleteFileFailedInSlave 30 opSlaveFull 31 opCopyToSlaveFailure	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.9
h3cFlhOperEndNotification If the value of it is specified 'true', a notification will be generated at the end of the operation. Else no notification will be generated.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.10
h3cFlhOperProgress The progress described as the time taken for the operation.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.11
h3cFlhOperRowStatus The row status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.12
h3cFlhOperServerPort The port of remote host acting as server for operation. If the value of this object is not specified, the server port is the known protocol port.	Integer32r/w	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.13
h3cFlhOperFailReason The failure reasons of operation.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.14
h3cFlhOperSrvAddrType The type of IP address for h3cFlhOperSrvAddrRev.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.15
h3cFlhOperSrvAddrRev The address of remote host acting as server for operation.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.16
h3cFlhOperSrvVPNName The VPN instance of this operation uses.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.17