igRowStatus
ZhoneGR303-MIB ·
.1.3.6.1.4.1.5504.4.3.1.1.1.17
Object
Used to control row creation and deletion.
A row in this table is created using a single
SNMP SET request with varbinds for:
a) igRowStatus set to'CreateAndGo',
b) the following READ-CREATE object(s) without a
default value (DEFVAL):
* igNameId
c) the following READ-CREATE objects with a
DEFVAL but whose defined default value is
inappropriate:
* igSwitchType
* igAdminStatus
* igStatsPeriod.
From augmented igControlChannelEntry:
* igControlChannelT303
* igControlChannelT396
* igSapi0MaxOutstandingFrames,
igSapi1MaxOutstandingFrames
* igSapi0N200, igSapi1N200
* igSapi0T200, igSapi1T200
* igSapi0T203, igSapi1T203
* igSapiPpsMode
If 'createAndGo' successfully created a new row,
the RowStatus will be 'active'. Subsequent to
successful row creation, the RowStatus can be
retrieved via an SNMP GET and the returned
RowStatus value is active. If the 'createAndGo'
was unsuccessful an SNMP error will be returned
and a subsequent GET on the non-existent row
will also return an SNMP error of noSuchInstance.
An SNMP SET with the RowStatus value of 'destroy'
indicates that the agent should remove the row
from service and then delete it.
The same rows must also be simultaneously created
or deleted in all augmenting tables:
* igControlChannelTable
* igStatsCurrentTable
* igStatsTotalTable
Context
- MIB
- ZhoneGR303-MIB
- OID
.1.3.6.1.4.1.5504.4.3.1.1.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- interfaceGroupEntry
- Table
- interfaceGroupTable
- Siblings
- 17
Values & Constraints
Type Values
1 | active |
4 | createAndGo |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| igNameId The Interface Group name is a unique symbolic
name that is used for call routing. The maximum
length for this name is 32 characters. Its value
cannot be modified during the In… | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.4.3.1.1.1.1 |
| igOperationalStatus GR-303-CORE R5-22 [274] Upon request by a remote
managing system (eg, ZMS), an RDT shall provide
a managing system with the RDT operational status
indicating whether it is full… | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.1.1.10 |
| igPeerStatus The status of the peer (or standby) Interface Group
Valid peer status values are
* noStandbyConfigured
* configuredAndAvailable
* configuredAndUnavailable | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.1.1.11 |
| igMaxConfigCalls GR-303-CORE 1.3.2 Generic IDLC Interface
Requirements Summary. The Generic IDLC Interface
uses a separate 64-kb/s data link (DS0-channel)
to perform per-call time-slot assignment… | column | calls Unsigned32 | .1.3.6.1.4.1.5504.4.3.1.1.1.12 |
| igCurrActiveCalls The number of calls currently in use.
igCurrActiveCalls is used in conjunction with
igMaxActiveCalls, the maximum number of calls
available, to provide a metric for describing … | column | calls Unsigned32 | .1.3.6.1.4.1.5504.4.3.1.1.1.13 |
| igStatsTimeElapsed The number of seconds that have elapsed since
the beginning of the current collection
period. If, for some reason, such as an
adjustment in the system's time-of-day clock,
the … | column | seconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.1.1.14 |
| igStatsValidIntervals The number of previous intervals for which
data was collected. The value will typically
be 24, 48, 72, or 96 unless the interface
group was brought online within the last 6,
1… | column | intervals Integer32 | .1.3.6.1.4.1.5504.4.3.1.1.1.15 |
| igStatsInvalidIntervals The number of intervals in the range from 0 to
igStatsValidIntervals for which no data is
available. This object will typically be zero
except in cases where the data for some in… | column | intervals Integer32 | .1.3.6.1.4.1.5504.4.3.1.1.1.16 |
| igWorkingMode Working mode indicates whether the selected switch can configure
the RDT using common management information service (CMIS) over
the Embedded Operations Channel (EOC) channel.
… | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.1.1.18 |
| igShelf The shelf where this Interface Group and GR-303
stack resides. Range of valid values is 0-255.
A value of 0 indicates the Interface Group is not
currently installed on a speci… | column | Zhone-TCZhoneShelfValueOrZero | .1.3.6.1.4.1.5504.4.3.1.1.1.2 |
| igSlot The slot where this Interface Group and GR-303
stack resides. Range of valid values is 0-17.
A value of 0 indicates the Interface Group is not
currently installed on a specific … | column | Zhone-TCZhoneSlotValueOrZero | .1.3.6.1.4.1.5504.4.3.1.1.1.3 |
| igPeerShelf The shelf where this Redundancy Group's peer
(or standby) resides. Peer shelf and peer
slot define where this peer Interface Group
and GR-303 stack resides. Range of valid
va… | column | Zhone-TCZhoneShelfValueOrZero | .1.3.6.1.4.1.5504.4.3.1.1.1.4 |
| igPeerSlot The slot where this Interface Group's peer
(or standby) resides. Peer shelf and peer
slot define where this Interface Group peer
and GR-303 stack resides. Range of valid
values… | column | Zhone-TCZhoneSlotValueOrZero | .1.3.6.1.4.1.5504.4.3.1.1.1.5 |
| igSwitchType The switch vendor for the Interface Group. The
following switch types are defined: unknown,
lucent_5ess, nortel_dms-100, lucent_gtd5,
santera_santeraOne, telica_plexus9000 and
t… | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.1.1.6 |
| igPrimaryEocTmcDs1IfIndex For systems that support more than one DS1,
protection switching for the Embedded Operations
Channel (EOC) and a Time-slot Management Channel
(TMC) is mandatory.
… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.5504.4.3.1.1.1.7 |
| igSecondaryEocTmcDs1IfIndex Refer to the description for igPrimaryEocTmcDs1IfIndex.
This object refers to the ifIndex for the DS1
line supporting the standy EOC and TMC path
protection switc… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.5504.4.3.1.1.1.8 |
| igAdminStatus GR-303-CORE The following requirements on status
and control of the overall RDT and IDT may also
be used during service assurance (e.g., placing
out-of-service for maintenance … | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.1.1.9 |