aal2ApAlgorithm
ZhoneAAL2-MIB ·
.1.3.6.1.4.1.5504.4.2.1.4.1.5
Object
column
r/w
Enumeration
By I.366.2 Annex B through I, the valid values
are:
* G.711 Pulse Code Modulation (PCM). Two
encoding laws are recommended, referred
to as A-law and m-law.
* G.722 Sub-Band Adaptive Pulse Code Modulation
(SB-ADPCM). Note: This codec is not currently supported.
* G.723.1 Note: This codec is not currently supported.
* G.726-32 Adaptive Pulse Code Modulation (ADPCM)
* G.727 Embedded Adaptive Pulse Code Modulation
(EADPCM). Note: This codec is not currently supported.
* G.728 Low Delay Code Excited Linear Prediction
(LD-CELP). Note: This codec is not currently supported.
* G.729-8 EDU format.Note: This codec is not currently supported.
* G.729 SID packet format.Note: This codec is not currently
supported.
* G.729-6.4 encoding data unit format. Note: This codec is not
currently supported.
* G.729-12 encoding data unit format for the
forward adaptive mode. Note: This codec is not currently
supported.
* Generic SID packet format. Note: This codec is not currently
supported.
The default is g711 (G.711).
Context
- MIB
- ZhoneAAL2-MIB
- OID
.1.3.6.1.4.1.5504.4.2.1.4.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aal2AudioProfileEntry
- Table
- aal2AudioProfileTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | g711 |
2 | g722 |
3 | g723 |
4 | g72632 |
5 | g727 |
6 | g728 |
7 | g729Edu |
8 | g729Sid |
9 | g72964 |
10 | g72912 |
11 | genericSid |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aal2ApIndex Index for the AAL2 Audio Profiles within an Audio
Profile entry, for a given aal2VclAudioProfileIdentifier.
Valid values are 1..512. Pre-defined audio profile
ent… | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.4.1.1 |
| aal2ApPacketLength Indicates the length of a packet in octets. The packet length with
the MinUUI and MaxUUI are used to correctly decode the encoding format.
Valid values are 1..64. … | column | octets Integer32 | .1.3.6.1.4.1.5504.4.2.1.4.1.10 |
| aal2ApMinUUI Minimum user to user indicator. 0 for encoding
of audio.
Valid values are 0..15. The default is 0 octets. | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.4.1.2 |
| aal2ApMaxUUI Maximum user to user indicator 15 for endcoding
of audio.
Valid values are 0..15. The default is 15 octets. | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.4.1.3 |
| aal2ApSduMultiples Indicates the multiples of the SDU for each
algorithm that occur.
Service data units (SDUs) for audio are defined
in relation to the profile of encoding formats
… | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.4.1.4 |
| aal2ApPktTime Packet time in tenths of milliseconds.
Valid values are 50..110. The default
is 55 tenths of milliseconds. | column | tenths of milliseconds Integer32 | .1.3.6.1.4.1.5504.4.2.1.4.1.6 |
| aal2ApSequence Audio encoding packets are accompanied by a
sequence number field that is embedded within
the UUI codepoint range 0-15 for type 1 packets.
It is mandatory for a transmitter to … | column | tenths of milliseconds Integer32 | .1.3.6.1.4.1.5504.4.2.1.4.1.7 |
| aal2ApRowStatus Used to control row creation and deletion.
A row in this table is created using a
single SNMP SET request with varbinds for:
a) aal2UdApRowStatus set to'CreateAnd… | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.4.2.1.4.1.8 |
| aal2ApSilenceSupression Used to control the transmission of cells during periods of
silence.
The default value is enabled. | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.4.1.9 |