zhoneGponPortConfigTable

The gpon port is similiar to VCLs in ATM.  Data is transferred between
OLT and ONU via ports. This profile is dynamically created during
CLI bridge-add, host-add, interface-add commands but must be 
explicitly created during SNMP operation.
          
GEM ports can be created using a supplied I/F index value or
using the next available I/F index value.   Since the GEM Port
is a virtual device, ZMS prefers to supply the I/F index value
because ZMS cannot lookup the newly created GEM port using
shelf/slot/olt/port indexing ( virual devices do not support
these values).
          
How to create a GEM port using next available I/F Index value, 
using a single SNMP packet with multiple var-binds:
          
   1. Do an SNMP-Next of the object ifIndexNext to determine
      the I/F index value of the new GEM port.  The SNMP-Next
      will not result in the auto-increment of ifIndexNext.
          		
   2. Issue single SNMP set command containing the following:
         zhoneGponPortConfigRowStatus.1 = create
         zhoneGponPortConfigRowShelf.1 = 1
         zhoneGponPortConfigRowSlot.1 = GEM port slot
         zhoneGponPortConfigRowOlt.1 = GEM port OLT
         zhoneGponPortConfigRowPort.1 = GEM Port ID value
         zhoneGponPortConfigRowTrafficProfile.1 = traffic profile
          
   The GEM port will be created using the next available ifIndex.
          	  
How to create a GEM port with a specified I/F index value, 
using a single SNMP packet with multiple var-binds:
          
   1. Do an SNMP-Get of the object ifIndexNext to determine
      the next available I/F index value.  The SNMP-Get
      will result in the auto-increment of ifIndexNext.
          
   2. Issue single SNMP set command containing the following:
         zhoneGponPortConfigRowStatus.aaa = create
         zhoneGponPortConfigRowShelf.aaa = 1
         zhoneGponPortConfigRowSlot.aaa = GEM port slot
         zhoneGponPortConfigRowOlt.aaa = GEM port OLT
         zhoneGponPortConfigRowPort.aaa = GEM Port ID value
         zhoneGponPortConfigRowTrafficProfile.aaa = traffic profile
          
      where aaa is the I/F index value collected in step 1.
          
   A GEM Port cannot be created if an I/F translate record
   already exists using the supplied I/F index value.
          
How to delete a GEM port using a single SNMP packet:
          
   1. Determine I/F index of GEM port config profile (aaa)
          
   2. Issue single SNMP set command containing the following:
         zhoneGponPortConfigRowStatus.aaa = destroy
          
Special Notes:
           
   1. The deletion of a GEM port will be prevented if the GEM    
      port supports bridges, interfaces, etc.
          
   2. The GEM port ID value determines the GEM port ONU.

MIB

Zhone-GPON-MIB

OID

.1.3.6.1.4.1.5504.5.14.1.3

Type

table

Status

current

Parent

zhoneGponObjectID

Siblings

24

Children

1