zhoneGponOltConfigBipErroredSamplesThreshold
Zhone-GPON-MIB ·
.1.3.6.1.4.1.5504.5.14.1.1.1.41
Object
If the number of errored samples exceed this sample threshold, report and disable the onu if in blockOnError mode, otherwise simply report the threshold as being exceeded.
Context
- MIB
- Zhone-GPON-MIB
- OID
.1.3.6.1.4.1.5504.5.14.1.1.1.41- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zhoneGponOltConfigEntry
- Table
- zhoneGponOltConfigTable
- Siblings
- 44
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneGponOltIfIndex The ifIndex of the physical olt interface. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.5504.5.14.1.1.1.1 |
| zhoneGponOltConfigAutoLearn Enable or disable password auto-learn mode. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.14.1.1.1.10 |
| zhoneGponOltConfigPowerLevel Olt power level. For the Broadlight 3000, values will be rounded down
to one of 0, 3, or 6. | column | db SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.5.14.1.1.1.11 |
| zhoneGponOltConfigGuardBitCount Number of guard bits for upstream transmission. | column | bits SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.12 |
| zhoneGponOltConfigDbaMode Working DBA mode. | column | Enumeration | .1.3.6.1.4.1.5504.5.14.1.1.1.13 |
| zhoneGponOltConfigGemBlockSize Basic unit in bytes used by all ONUs for DBA reports
of their queue occupancy (for piggyback and whole-report
DBA only). | column | bytes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.14 |
| zhoneGponOltConfigUsBerInterval Interval for upstream bit error rate calculation. | column | msec SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.15 |
| zhoneGponOltConfigDsBerInterval Interval used for downstream bit error rate calculation. | column | msec SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.16 |
| zhoneGponOltConfigBerSfThreshold Threshold is 10**(-N) for signal fail. | column | Integer32 | .1.3.6.1.4.1.5504.5.14.1.1.1.17 |
| zhoneGponOltConfigBerSdThreshold Threshold is 10**(-N) for signal degrade.
Must exceed sf threshold. | column | Integer32 | .1.3.6.1.4.1.5504.5.14.1.1.1.18 |
| zhoneGponOltConfigFecRequest Indicates whether OLT turns on FEC indication for all Alloc-Id
in the Upstream Bandwidth Map. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.14.1.1.1.19 |
| zhoneGponOltConfigMaxRtPropagationDelay Maximum round trip propagation delay. Combined with max ONU response
time and preassigned delay determins maximum logical PON distance.
Default 200 usec for 20 dm. | column | usec SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.2 |
| zhoneGponOltConfigKeyExchange Specifies whether Single Key exchange should be performed
during ONU activation process. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.14.1.1.1.20 |
| zhoneGponOltConfigMinRtPropagationDelay If closest ONU location is known, GPON_stack uses
this value in order to limit the size of the quiet zone. | column | usec SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.21 |
| zhoneGponOltConfigMinOnuResponseTime GPON_stack uses this value in order to limit the
size of the quiet zone. | column | usec SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.22 |
| zhoneGponOltConfigEqDMeasureCycles Defines the number of measurement cycles in the Ranging process. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.23 |
| zhoneGponOltConfigDriftControlInterval Defines the interval of periodic monitoring on
drifts of upstream data. | column | msec SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.24 |
| zhoneGponOltConfigDriftControlLimit Indicates the limit of upstream data drift. | column | bits SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.25 |
| zhoneGponOltConfigAllocCycleLength Alloc-ID assignment map cycle length. | column | msec Integer32 | .1.3.6.1.4.1.5504.5.14.1.1.1.26 |
| zhoneGponOltConfigMinUsAlloc Size of minimal upstream allocation per frame. | column | bytes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.27 |
| zhoneGponOltConfigAckTimeout Timeout length of Acknowledge message. | column | msec SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.28 |
| zhoneGponOltConfigPlsMaxAllocSize Indecates a size of unassigned allocation that should be attached
to the end of ranging window. | column | bytes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.29 |
| zhoneGponOltConfigMaxOnuResponseTime Combined with max rt propagation delay, determins maximum logical
PON distance. | column | usec SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.3 |
| zhoneGponOltConfigDbaCycle The Dynamic Bandwidth Allocation(dba) cycle determines the DBA interval
size. Its an integer multiplicant of 2 milli seconds. The range of values
for the dba cycle can be between … | column | msec Unsigned32 | .1.3.6.1.4.1.5504.5.14.1.1.1.30 |
| zhoneGponOltConfigSrDbaReportingBlockSize For DBA of SR type, the block size defines the resolution of the status
reports per PON link.The default value is 48 bytes. | column | bytes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.5.14.1.1.1.31 |
| zhoneGponOltConfigProtectionSwitchoverTimer If we receive LOS alarm for a link in Active state, the link state
changes to Switch Over Pending state. If the actual switch-over does
not happen after this protection-switchover… | column | msec SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.5.14.1.1.1.32 |
| zhoneGponOltConfigPreambleOverride Used to force the OLT to use the Preamble configuration in the
OLT configuration profile. Otherwise the Preamble configuration
will be determined at runtime and based on the SFP. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.14.1.1.1.33 |
| zhoneGponOltConfigPreambleType0 Byte number for preamble type 0.
This string represents a hex value with range 0x00 to 0xFF.
String must have the following format: 0xNN where
wher… | column | OctetString | .1.3.6.1.4.1.5504.5.14.1.1.1.34 |
| zhoneGponOltConfigPreambleType1 Byte number for preamble type 1.
This string represents a hex value with range 0x00 to 0xFF.
String must have the following format: 0xNN where
wher… | column | OctetString | .1.3.6.1.4.1.5504.5.14.1.1.1.35 |
| zhoneGponOltConfigPreambleType3PreRange Byte number for preamble type 3 pre-ranging.
This string represents a hex value with range 0x00 to 0xFF.
String must have the following format: 0xNN … | column | OctetString | .1.3.6.1.4.1.5504.5.14.1.1.1.36 |
| zhoneGponOltConfigPreambleType3PostRange Byte number for preamble type 3 post-ranging.
This string represents a hex value with range 0x00 to 0xFF.
String must have the following format: 0xNN… | column | OctetString | .1.3.6.1.4.1.5504.5.14.1.1.1.37 |
| zhoneGponOltConfigPreambleType3Pattern Preamble type 3 pattern.
This string represents a hex value with range 0x00 to 0xFF.
String must have the following format: 0xNN where
where N is … | column | OctetString | .1.3.6.1.4.1.5504.5.14.1.1.1.38 |
| zhoneGponOltConfigBipErrorMonitoring If in disabled mode, do not report BIP errors, do not disable ONU and
do not throw any traps.
If in monitorOnly mode, monitor BIP errors and if BIP … | column | Enumeration | .1.3.6.1.4.1.5504.5.14.1.1.1.39 |
| zhoneGponOltConfigPreassignedEqD Combined with max rt propagation delay and max onu response time
determines max logical PON distance. | column | usec SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.4 |
| zhoneGponOltConfigBipErrorsPerSampleThreshold If the number of BIP errors per sample exceeds this threshold,
it is counted as an errored sample. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.40 |
| zhoneGponOltConfigBipMaxSampleGap If two adjancent errored samples were taken farther apart than
this threshold, do not count the earlier sample as an errored sample. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.42 |
| zhoneGponOltConfigRogueOnuDetection Controls detection of rogue ONU on fiber.
Values are:
1. detection disabled
2. detect via measurement from rssi process
3. detect via indication from background process.
4. normal… | column | Enumeration | .1.3.6.1.4.1.5504.5.14.1.1.1.43 |
| zhoneGponOltConfigRogueOnuDetectFrequency Frequency in seconds for detection
background task. | column | seconds Integer32 | .1.3.6.1.4.1.5504.5.14.1.1.1.44 |
| zhoneGponOltConfigRogueOnuRxPowerThreshold Power level below which to report rssi
rogue ONU. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.45 |
| zhoneGponOltConfigLosAlpha Number of loss-of-signal occurrences to trigger alarm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.5 |
| zhoneGponOltConfigLofAlpha Number of loss-of-frame occurrences to trigger alarm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.6 |
| zhoneGponOltConfigLoamAlpha Number of loss-of-OAM occurrences to trigger alarm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.14.1.1.1.7 |
| zhoneGponOltConfigScrambler Description. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.14.1.1.1.8 |
| zhoneGponOltConfigFecMode Enables or disables forward error correction. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.14.1.1.1.9 |