zhoneCpePwePtypeSignalling
Zhone-CPE-MIB ·
.1.3.6.1.4.1.5504.5.16.1.12.2.1.18
Object
column
r/w
Unsigned32
This attribute specifies the RTP payload type direction for the signaling channel in the TDM to PSN. Assignable PTYPEs lie in the dynamic range 96..127. If signalling is not transported in its own channel, the value should be set to 0. So the valid values used are 0, 96-127.
Context
- MIB
- Zhone-CPE-MIB
- OID
.1.3.6.1.4.1.5504.5.16.1.12.2.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zhoneCpePweEntry
- Table
- zhoneCpePweTable
- Siblings
- 43
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-127
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneCpePweIndex This represents the CPE Pwe Index. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.1 |
| zhoneCpePweSignalling This attribute specifies how CAS signalling is carried. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.10 |
| zhoneCpePwePayloadSize Number of payload bytes per packet. Valid only if service type =
unstructured or unstructured octet-aligned. Valid choices depend on the
TDM service, but must include the followin… | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.11 |
| zhoneCpePwePayloadEncapsulationDelay This represents number of 125 microsecond frames to be encapsulated in
each pseudowire packet. Valid only if service type = structured. The
minimum set of choices for various TDM … | column | number of frames Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.12 |
| zhoneCpePweTimingMode This attribute selects the timing mode of the TDM service. If RTP is used,
this attribute must be set to be consistent with the value of the RTP time
stamp mode attribute in the R… | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.13 |
| zhoneCpePweChannelAssign If service type is structured, this attribute is a bit field indicating
the 64kbps sub channels are used. This is not supported currently. The default
value is channel0, but it mi… | column | Bits | .1.3.6.1.4.1.5504.5.16.1.12.2.1.14 |
| zhoneCpePweClockReference This attribute specifies the frequency of the common timing reference,
in multiples of 8 kHz. The default value is 1 (8 kHz). | column | kHz Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.15 |
| zhoneCpePweRtpTimeStampMode This attribute determines the mode in which RTP timestamps are generated
in the TDM to PSN direction. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.16 |
| zhoneCpePwePtypePayload This attribute specifies the RTP payload type for the payload channel
in the TDM to PSN direction. Assignable PTYPEs lie in the dynamic range
96..127. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.17 |
| zhoneCpePweSSrcPayload This attribute specifies the RTP synchronization source for the payload
channel in the TDM to PSN direction. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.19 |
| zhoneCpePweRowStatus Used to create, modify or delete an entry in this table. | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.5.16.1.12.2.1.2 |
| zhoneCpePweSSrcSignalling This attribute specifies the RTP synchronization source for the signaling
channel in the TDM to PSN direction. If signalling is not transported in
its own channel, this value shou… | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.20 |
| zhoneCpePweExpectedPTypePayload This attribute specifies the RTP payload type for the payload channel in
the PSN to TDM direction. The received payload type may be used to detect
malformed packets. To disable th… | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.21 |
| zhoneCpePweExpectedPTypeSignalling This attribute specifies the RTP payload type for the signaling channel
in the PSN to TDM direction. The received payload type may be used to
detect malformed packets. To disable … | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.22 |
| zhoneCpePweExpectedSSrcPayload This attribute specifies the RTP synchronization source in the PSN to TDM
direction. The received SSRC may be used to detect misconnection
(stray packets). To disable the check fu… | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.23 |
| zhoneCpePweExpectedSSrcSignalling This attribute specifies the RTP synchronization source for the signalling
channel in the PSN to TDM direction. The received SSRC may be used to detect
misconnection (stray packet… | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.24 |
| zhoneCpePweJitterBufMax This attribute specifies the desired maximum depth of the playout buffer
in the PSN to TDM direction. The value is expressed as a multiple of the
125 micro second frame rate. The … | column | micro seconds Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.25 |
| zhoneCpePweJitterBufDesired This attribute specifies the desired nominal fill depth of the playout
buffer in the PSN to TDM direction. The value is expressed as a multiple
of the 125 micro second frame rate.… | column | micro seconds Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.26 |
| zhoneCpePweFillPolicy This attribute defines the payload bit pattern to be applied toward the
TDM service if no payload packet is available to play out. The default
value 1 specifies that the ONT apply… | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.27 |
| zhoneCpePweMisconnectedDeclarePolicy The alarm declaration policy attribute defines the anomaly rate that causes
the corresponding alarm to be declared. It is an integer percentage between
1..100. If this density of … | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.28 |
| zhoneCpePweMisconnectedClearPolicy The alarm clear policy attribute defines the anomaly rate that causes the
correcponding alarm to be cleared. It is an integer percentage between
0..99. If no more than this densit… | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.29 |
| zhoneCpePweProfileName CPE Pwe profile for the dynamic bridging. This field is only writable
upon creation and must be unique within its table. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.5.16.1.12.2.1.3 |
| zhoneCpePweLossPacketDeclarePolicy The alarm declaration policy attribute defines the anomaly rate that causes
the corresponding alarm to be declared. It is an integer percentage between
1..100. If this density of … | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.30 |
| zhoneCpePweLossPacketClearPolicy The alarm clear policy attribute defines the anomaly rate that causes the
correcponding alarm to be cleared. It is an integer percentage between
0..99. If no more than this densit… | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.31 |
| zhoneCpePweOverrunUnderrunDeclarePolicy The alarm declaration policy attribute defines the anomaly rate that causes
the corresponding alarm to be declared. It is an integer percentage between
1..100. If this density of … | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.32 |
| zhoneCpePweOverrunUnderrunClearPolicy The alarm clear policy attribute defines the anomaly rate that causes the
correcponding alarm to be cleared. It is an integer percentage between
0..99. If no more than this densit… | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.33 |
| zhoneCpePweMalformedDeclarePolicy The alarm declaration policy attribute defines the anomaly rate that causes
the corresponding alarm to be declared. It is an integer percentage between
1..100. If this density of … | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.34 |
| zhoneCpePweMalformedClearPolicy The alarm clear policy attribute defines the anomaly rate that causes the
correcponding alarm to be cleared. It is an integer percentage between
0..99. If no more than this densit… | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.35 |
| zhoneCpePweRBitTransmitSetPolicy This attribute defines the number of consecutive lost packets that
causes the transmitted R bit to be set in the TDM to PSN direction, indicating
lost packets to the far end. The … | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.36 |
| zhoneCpePweRBitTransmitClearPolicy This attribute defines the number of consecutive valid packets
that causes the transmitted R bit to be cleared in the TDM to PSN direction,
removing the remote failure indication … | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.37 |
| zhoneCpePweRBitReceivePolicy This attribute defines the action toward the Nx64 TDM interface when
remote failure is indicated on packets received from the PSN. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.38 |
| zhoneCpePweLBitReceivePolicy This attribute defines the action toward the TDM interface when far end TDM
failure is indicated on packets received from the PSN. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.39 |
| zhoneCpePweLineType This attribute specifies the line type (T1, E1 or other) used. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.4 |
| zhoneCpePweSesThreshold Number of lost, malformed or otherwise unusable packets expected in the
PSN to TDM direction within a one-second interval that causes a severely
errored second to be counted. Stra… | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.40 |
| zhoneCpePweCdvTolerance This attribute represents the duration of user data that must be buffered
by the CES interworking entity to offset packet delay variation. It is
expressed in 10 microsecond increm… | column | microseconds Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.12.2.1.41 |
| zhoneCpePweChannelAssociatedSignalling This attribute selects the signalling format. It applies to structured
interfaces only. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.42 |
| zhoneCpePweMplsTpType This attribute specifies the type of ANI-side termination for the MPLS
Pseudowire. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.43 |
| zhoneCpePweDscp This parameter indicates DSCP value for cpe pwe traffic.
Valid code values:
<0-63> Differentiated services codepoint value
af11 Mark packet… | column | OctetString | .1.3.6.1.4.1.5504.5.16.1.12.2.1.44 |
| zhoneCpePweEncoding This attribute specifies the line coding scheme. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.5 |
| zhoneCpePweDs1Mode This attribute specifies the mode of a DS1. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.6 |
| zhoneCpePweDs1Framing This attribute specifies the DS1 framing structure. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.7 |
| zhoneCpePweTransport The underlying transport for the Pseudowire service. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.8 |
| zhoneCpePweServiceType This attribute specifies the basic service type, either a transparent bit
pipe or an encapsulation that recognizes the underlying structure of the
payload. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.12.2.1.9 |