zhoneCpeIpServerFirewallAccess
Zhone-CPE-MIB ·
.1.3.6.1.4.1.5504.5.16.1.4.3.1.9
Object
column
r/w
Bits
Lists the protocols allowed on this interface. The firewall option must be enabled before these settings will take effect.
Context
- MIB
- Zhone-CPE-MIB
- OID
.1.3.6.1.4.1.5504.5.16.1.4.3.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zhoneCpeIpServerEntry
- Table
- zhoneCpeIpServerTable
- Siblings
- 14
Syntax
Bits
Values & Constraints
Enumerated Values
0 | http |
1 | ping |
2 | snmp |
3 | snmptrap |
4 | ssh |
5 | telnet |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneCpeIpServerIndex This represents the CPE Ip server index value. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.4.3.1.1 |
| zhoneCpeIpServerNat When it is enabled, NAT/NAPT function is performed to translate between the public IP address and the private
addresses. It is only supported on a WAN interface. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.4.3.1.10 |
| zhoneCpeIpServerSecureForward When this mode is enabled, packets are not flooded to all ports. Instead, all
packets are forwarded to the port that is designated as the uplink port. In
this mode, users are prev… | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.4.3.1.11 |
| zhoneCpeIpServerIgmpFunction Enable an Igmp snooping function. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.4.3.1.12 |
| zhoneCpeIpServerDefaultIface When true, an internally generated packet
(e.g., from SNMP trap, SNTP, etc.) is sent out through this
interface if the destination IP address is not defined
in the route table. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.5.16.1.4.3.1.13 |
| zhoneCpeIpServerDnsSrc When true, the Interface is used by the
DHCP Client to obtain DNS information. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.5.16.1.4.3.1.14 |
| zhoneCpeIpServerDnsType Default - Get the DNS information from the WAN interface
Static - The DNS information is manually provisioned
Proxy - Enable interface to act as a proxy for DNS requests | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.4.3.1.15 |
| zhoneCpeIpServerRowStatus Used to create, modify or delete an entry in this table. | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.5.16.1.4.3.1.2 |
| zhoneCpeIpServerProfileName CPE Ip server profile for the VoIP services for the dynamic bridging.
This field is only writable upon creation and must be unique within its
table. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.5.16.1.4.3.1.3 |
| zhoneCpeIpServerHostIpOption This attribute selects an IP related option. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.4.3.1.4 |
| zhoneCpeIpServerNetmask The subnet mask for IP host services. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.5.16.1.4.3.1.5 |
| zhoneCpeIpServerGateway The default gateway address used for IP host services, this attribute
has the default value 0.0.0.0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.5.16.1.4.3.1.6 |
| zhoneCpeIpServerPrimaryDns This attribute specifies the primary DNS IP address. If this value is
0.0.0.0, no primary SIP DNS is defined. The default value is 0.0.0.0 | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.5.16.1.4.3.1.7 |
| zhoneCpeIpServerSecondaryDns This attribute specifies the secondary DNS IP address. If this value
is 0.0.0.0, no secondary SIP DNS is defined. The default value is 0.0.0.0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.5.16.1.4.3.1.8 |