zhoneCpeEthSubscriberPowerRange
Zhone-CPE-MIB ·
.1.3.6.1.4.1.5504.5.16.1.8.1.17
Object
column
r/w
Enumeration
Maximum PoE ( Power over ethernet ) Power allowed per port. When disabled, no PoE Power will be provided.
Context
- MIB
- Zhone-CPE-MIB
- OID
.1.3.6.1.4.1.5504.5.16.1.8.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zhoneCpeEthSubscriberEntry
- Table
- zhoneCpeEthSubscriberTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disabled |
2 | low |
3 | medium |
4 | high |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneCpeEthSubscriberPortNumber This represents the CPE Eth Subscriber Port Number. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.8.1.1 |
| zhoneCpeEthSubscriberMode This attribute specifies whether the Ethernet interface is bridged or
derived from an IP router function. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.8.1.10 |
| zhoneCpeEthSubscriberPowerFeed This attribute controls whether power is provided to an external equipment
over the Ethernet interface. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.8.1.11 |
| zhoneCpeVideoProfileIndex This object points to the associated video profile. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.8.1.12 |
| zhoneCpeTrafficManagementProfileIndex This object points to the associated Traffic Management profile. If there is
no traffic control for the UNI, set it to 0. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.8.1.13 |
| zhoneCpeEthSubscriberLineStatusAlarm This field is for enabling/disabling alarm reporting from this CPE UNI. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.8.1.14 |
| zhoneCpeEthSubscriberAlarmSeverity This field is for specifying the severity level of all the alarms from this CPE UNI. | column | Zhone-TCZhoneAlarmSeverity | .1.3.6.1.4.1.5504.5.16.1.8.1.15 |
| zhoneCpeEthSubscriberPowerShed When zhoneCpeSystemCommonPowerShutdownDelay is non-zero and the unit is operating on Battery
Power during an AC power outage, this option controls the Enable/Disable state of each… | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.8.1.16 |
| zhoneCpeEthSubscriberLldpMedList A list of cpe-lldp-med-policy profiles. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.5.16.1.8.1.18 |
| zhoneCpeEthSubscriberRowStatus Used to create, modify or delete an entry in this table. | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.5.16.1.8.1.2 |
| zhoneCpeEthSubscriberAdminState This attribute activates or deactivates the functions performed by
the Ethernet port for this subscriber or put the port in test mode. | column | Zhone-TCZhoneAdminState | .1.3.6.1.4.1.5504.5.16.1.8.1.3 |
| zhoneCpeEthSubscriberLoopback This enables or disables Ethernet loopback. | column | Zhone-TCZhoneEnabledFlag | .1.3.6.1.4.1.5504.5.16.1.8.1.4 |
| zhoneCpeEthSubscriberRate This attribute sets the Ethernet port rate. | column | Mbps Enumeration | .1.3.6.1.4.1.5504.5.16.1.8.1.5 |
| zhoneCpeEthSubscriberDuplex This attribute sets the Ethernet port duplex. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.8.1.6 |
| zhoneCpeEthSubscriberMtu This attribute denotes the maximum frame size allowed across this interface. | column | Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.8.1.7 |
| zhoneCpeEthSubscriberPortType This attribute specifies the Ethernet interface wiring. | column | Enumeration | .1.3.6.1.4.1.5504.5.16.1.8.1.8 |
| zhoneCpeEthSubscriberPauseTime This attribute allows the interface to ask the subscriber terminal to
temporarily suspend sending data. Units are in pause quanta
(1 pause quantum is 512 bit times of the particul… | column | quanta Unsigned32 | .1.3.6.1.4.1.5504.5.16.1.8.1.9 |