accessSwitchVdslVtuoCurrStatus

ZYXEL-VDSLLINE-MIB · .1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.9

Object

column mandatory Integer32

Indicates mandatory state of the VTU-O line.  This is a
bit-map of possible conditions.  The various bit
positions are:
              
0      noDefect             There no defects on the line
              
1      lossOfFraming        VTU-O failure due to not
                     receiving valid frame.
              
2      lossOfSignal         VTU-O failure due to not
                     receiving signal.
              
3      lossOfPower          VTU-O failure due to loss of
                     power.
                     Note: the Agent may still
                     function.
              
4      lossOfSignalQuality  Loss of Signal Quality is
                     declared when the Noise Margin
                     falls below the Minimum Noise
                     Margin, or the bit-error-rate
                     exceeds 10^-7.
              
5      lossOfLink           VTU-O failure due to inability
                     to link with VTU-R.
              
6      dataInitFailure      VTU-O failure during
                     initialization due to bit
                     errors corrupting startup
                     exchange data.
              
7      configInitFailure    VTU-O failure during
                     initialization due to peer
                     VTU not able to support
                     requested configuration
              
8      protocolInitFailure  VTU-O failure during
                     initialization due to
                     incompatible protocol used by
                     the peer VTU.
              
9      noPeerVtuPresent     VTU-O failure during
                     initialization due to no
                     activation sequence detected
                     from peer VTU.
              
This is intended to supplement ifOperStatus.

Context

MIB: ZYXEL-VDSLLINE-MIB
OID: .1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.9
Type: column
Access: readonly
Status: mandatory
Parent: accessSwitchVdslVtuoPhysEntry
Table: accessSwitchVdslVtuoPhysTable
Siblings: 8

Syntax

Integer32

Source: COPS-PR-SPPIInteger32
Base type: Integer32

Values & Constraints

Object Constraints

range: 0-96

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
accessSwitchVdslVtuoCurrSnrMgn mandatory Noise Margin as seen by this VTU with respect to its received signal in 0.01dB.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.1`
accessSwitchVdslVtuoCurrMse mandatory Minimum Square Error as seen by this VTU with respect to its received signal in 0.01dB.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.2`
accessSwitchVdslVtuoCurrPsd mandatory Power Spectral Density as seen by this VTU with respect to its received signal in 0.01dBm/Hz.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.3`
accessSwitchVdslVtuoCurrRsErr mandatory Reed-Solomon error counted by this VTU with respect to its received signal.	column	RFC1155-SMICounter	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.4`
accessSwitchVdslVtuoCurrAtn mandatory Measured difference in the total power transmitted by the peer VTU and the total power received by this VTU.	column	RFC1155-SMIGauge	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.5`
accessSwitchVdslVtuoCurrOutputPwr mandatory Measured total output power in 0.01dBm transmitted by this VTU.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.6`
accessSwitchVdslVtuoCurrRate mandatory Actual transmission rate in bits-per-second on this line.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.7`
accessSwitchVdslVtuoCurrAttainableRate mandatory Indicates the maximum mandatoryly attainable data rate in bits-per-second by the VTU. This value will be equal or greater than the mandatory line rate.	column	RFC1155-SMIGauge	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.8`