pingCtlDSField
ZYXEL-ES3124PWR-MIB ·
.1.3.6.1.4.1.890.1.5.8.14.23.2.1.24
Object
column
r/w
Unsigned32
Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the ping probe. The DS Field is defined as the Type of Service (TOS) octet in a IPv4 header or as the Traffic Class octet in a IPv6 header. The value of this object must be a decimal integer in the range from 0 to 255. This option can be used to determine what effect an explicit DS Field setting has on a ping response. Not all values are legal or meaningful. A value of 0 means that the function represented by this option is not supported. DS Field usage is often not supported by IP implementations and not all values are supported. Refer to RFC 2474 for guidance on usage of this field.
Context
- MIB
- ZYXEL-ES3124PWR-MIB
- OID
.1.3.6.1.4.1.890.1.5.8.14.23.2.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pingCtlEntry
- Table
- pingCtlTable
- Siblings
- 24
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pingCtlServInstType The type of the service instance that this ping entry belong to.
1: VLAN.
This item would be used as an index | column | Enumeration | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.1 |
| pingCtlAdminStatus Reflects the desired state that a pingCtlEntry should be
in:
enabled(1) - Attempt to activate the test as defined by
this pingCtlEntry.
disabled(2) - Deactivate the … | column | Enumeration | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.10 |
| pingCtlDataFill The content of this object is used together with the
corresponding pingCtlDataSize value to determine how to
fill the data portion of a probe packet. The option of
selecting a da… | column | OctetString | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.11 |
| pingCtlFrequency The number of seconds to wait before repeating a ping test
as defined by the value of the various objects in the
corresponding row.
A single ping test consists of a series of ping… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.12 |
| pingCtlMaxRows The maximum number of entries allowed in the
pingProbeHistoryTable. An implementation of this
MIB will remove the oldest entry in the
pingProbeHistoryTable to allow the addition … | column | rows SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.13 |
| pingCtlStorageType The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.14 |
| pingCtlTrapGeneration The value of this object determines when and if
to generate a notification for this entry:
probeFailure(0) - Generate a pingProbeFailed
notification subject to the value of
… | column | Bits | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.15 |
| pingCtlTrapProbeFailureFilter The value of this object is used to determine when
to generate a pingProbeFailed NOTIFICATION.
Setting pingCtlTrapGeneration
to probeFailure(0) implies that a pingP… | column | Unsigned32 | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.16 |
| pingCtlTrapTestFailureFilter The value of this object is used to determine when
to generate a pingTestFailed NOTIFICATION.
Setting pingCtlTrapGeneration to testFailure(1)
implies that a pingTestFailed NOTIFIC… | column | Unsigned32 | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.17 |
| pingCtlType The value of this object is used to either report or
select the implementation method to be used for
calculating a ping response time. The value of this
object MAY be selected fr… | column | ObjectIdentifier | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.18 |
| pingCtlDescr The purpose of this object is to provide a
descriptive name of the remote ping test. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.19 |
| pingCtlServInstId The ID of the service instance that this ping entry belong to.
This item would be used as an index | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.2 |
| pingCtlSourceAddressType Specifies the type of the source address,
pingCtlSourceAddress, to be used at a remote host
when performing a ping operation. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.20 |
| pingCtlSourceAddress Use the specified IP address (which must be given
in numeric form, not as a hostname) as the source
address in outgoing probe packets. On hosts with
more than one IP address, thi… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.21 |
| pingCtlIfIndex Setting this object to an interface's ifIndex prior
to starting a remote ping operation directs
the ping probes to be transmitted over the
specified interface. A value of zero fo… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.22 |
| pingCtlByPassRouteTable The purpose of this object is to optionally enable
bypassing the route table. If enabled, the remote
host will bypass the normal routing tables and send
directly to a host on an … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.23 |
| pingCtlRowStatus This object allows entries to be created and deleted
in the pingCtlTable. Deletion of an entry in this
table results in all corresponding (same
pingCtlOwnerIndex and pingCtlTestN… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.25 |
| pingCtlOwnerIndex To facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model (RFC 2575, VACM) for tables in which
multiple users may need… | column | OctetString | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.3 |
| pingCtlTestName The name of the ping test. This is locally unique, within
the scope of an pingCtlOwnerIndex. | column | OctetString | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.4 |
| pingCtlTargetAddressType Specifies the type of host address to be used at a remote
host for performing a ping operation. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.5 |
| pingCtlTargetAddress Specifies the host address to be used at a remote host for
performing a ping operation. The host address type is
determined by the object value of corresponding
pingCtlTargetAddr… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.6 |
| pingCtlDataSize Specifies the size of the data portion to be
transmitted in a ping operation in octets. A ping
request is usually an ICMP message encoded
into an IP packet. An IP packet has a m… | column | octets Unsigned32 | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.7 |
| pingCtlTimeOut Specifies the time-out value, in seconds, for a
remote ping operation. | column | seconds Unsigned32 | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.8 |
| pingCtlProbeCount Specifies the number of times to perform a ping
operation at a remote host. | column | probes Unsigned32 | .1.3.6.1.4.1.890.1.5.8.14.23.2.1.9 |