zyAclV2ClassifierIpDSCP
ZYXEL-AclV2-MIB ·
.1.3.6.1.4.1.890.1.15.3.105.1.5.1.3
Object
column
Integer32
DSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP.
Context
- MIB
- ZYXEL-AclV2-MIB
- OID
.1.3.6.1.4.1.890.1.15.3.105.1.5.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- zyxelAclV2ClassifierIpEntry
- Table
- zyxelAclV2ClassifierIpTable
- Siblings
- 14
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zyAclV2ClassifierIpPacketLenRangeStart The Start value of IP packet length range, 0~65535.
And it must smaller then the zyAclV2ClassifierIpPacketLenRangeEnd.
Value -1 means any start value. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.1.5.1.1 |
| zyAclV2ClassifierIpDestinationIpAddress Destination IP address for classifier rule. 0.0.0.0 means any destination IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.890.1.15.3.105.1.5.1.10 |
| zyAclV2ClassifierIpDestinationIpMaskBits Destination IP mask bits for classifier rule. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.1.5.1.11 |
| zyAclV2ClassifierIpSourceSocketRangeStart Source Socket Number range start for classifier rule, 0~65535.
If not qualifying a range of socket numbers,
the zyAclV2ClassifierSourceSocketRangeEnd is no need to configure. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.1.5.1.12 |
| zyAclV2ClassifierIpSourceSocketRangeEnd Destination Socket Number range end for classifier rule.
This object is not necessary. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.1.5.1.13 |
| zyAclV2ClassifierIpDestinationSocketRangeStart Source Socket Number range start for classifier rule, 0~65535.
If not qualifying a range of socket numbers,
the zyAclV2ClassifierDestinationSocketRangeEnd is no need to configure. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.1.5.1.14 |
| zyAclV2ClassifierIpDestinationSocketRangeEnd Destination Socket Number range end for classifier rule.
This object is not necessary. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.1.5.1.15 |
| zyAclV2ClassifierIpPacketLenRangeEnd The End value of IP packet length range, 0~65535.
And it must larger then the zyAclV2ClassifierIpPacketLenRangeStart.
Value -1 means any start value. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.1.5.1.2 |
| zyAclV2ClassifierIpPrecedence Precedence for calssifier rule, 0~7. Value -1 means any Precedence. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.1.5.1.4 |
| zyAclV2ClassifierIpToS ToS for calssifier rule, 0~127. Value -1 means any ToS. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.1.5.1.5 |
| zyAclV2ClassifierIpProtocol IP Protocol for classifier rule. Value 255 means any IP protocol. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.1.5.1.6 |
| zyAclV2ClassifierIpEstablishOnly Establish Only for TCP protocol type in classifier rule.
This means that the switch will pick out the packets that are sent to establish TCP connections. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.890.1.15.3.105.1.5.1.7 |
| zyAclV2ClassifierIpSourceIpAddress Source IP address for classifier rule. 0.0.0.0 means any source IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.890.1.15.3.105.1.5.1.8 |
| zyAclV2ClassifierIpSourceIpMaskBits Source IP mask bits for classifier rule. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.105.1.5.1.9 |