zxSonetVTLoopbackConfig
ZXSONETIF-MIB ·
.1.3.6.1.4.1.3902.1015.1013.2.1.3.3.1.2
Object
column
r/w
Enumeration
This variable represents the desired loopback
configuration of the Sonet VT. Agents
supporting read/write access should return
inconsistentValue in response to a requested
loopback state that the interface does not
support. The values mean:
noLoop
Not in the loopback state.
payloadLoop
The received signal at this interface is looped
through the device. Typically the received signal
is looped back for retransmission after it has
passed through the device's framing function.
lineLoop
The received signal at this interface does not go
through the device (minimum penetration) but is
looped back out.
otherLoop
Loopbacks that are not defined here.
inwardLoop
The transmitted signal at this interface is
looped back and received by the same interface.
What is transmitted onto the line is product
dependent.
dualLoop
Both lineLoop and inwardLoop will be
active simultaneously.
Context
- MIB
- ZXSONETIF-MIB
- OID
.1.3.6.1.4.1.3902.1015.1013.2.1.3.3.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxSonetVTConfigEntry
- Table
- zxSonetVTConfigTable
- Siblings
- 4
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | noLoop |
2 | payloadLoop |
3 | lineLoop |
4 | otherLoop |
5 | inwardLoop |
6 | dualLoop |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxSonetVTIfIndex deprecated The 4 bytes index includes:
interface type(bit31~28);shelfId(bit27~24);slotId(bit23~19);portId(bit18~16);augno(bit15~bit10);
au3/au4no(bit9~bit8);tug3no(bit7~bit6);tug2no(bit5~bit… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.3902.1015.1013.2.1.3.3.1.1 |
| zxSonetVTTransmitClockSource The source of Transmit Clock.
'loopTiming' indicates that the recovered
receive clock is used as the transmit clock.
'localTiming' indicates that a local clock
sour… | column | Enumeration | .1.3.6.1.4.1.3902.1015.1013.2.1.3.3.1.3 |
| zxSonetVTClockStatus The current clock state of the sonet VT interface. the value can be:
FREERUN 0
HOLDOVER 1
ACQUIRING 2
ACUIRED 3. | column | Integer32 | .1.3.6.1.4.1.3902.1015.1013.2.1.3.3.1.4 |
| zxSonetVTCfgInfoSend The action to send the configuration on
Sonet VT to corresponding card. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1013.2.1.3.3.1.5 |