zxr10MplsL2vpnPWLocalGroupId
ZXR10-MPLS-L2VPN ·
.1.3.6.1.4.1.3902.3.104.1.1.1.1.11
Object
column
SNMPv2-SMIUnsigned32
Used in the Group ID field sent to peer within the maintenance protocol used for PW setup.
Context
- MIB
- ZXR10-MPLS-L2VPN
- OID
.1.3.6.1.4.1.3902.3.104.1.1.1.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- zxr10MplsL2vpnPWEntry
- Table
- zxr10MplsL2vpnPWTable
- Siblings
- 23
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxr10MplsL2vpnPWVcId VcId of Mpls L2vpn that PW belongs to.It can't be zero. | column | Unsigned32 | .1.3.6.1.4.1.3902.3.104.1.1.1.1.1 |
| zxr10MplsL2vpnPWStatus If PW has finished negotiation with remote peer including internal label and
other parameters,then PW will be in established status. | column | MplsL2vpnPWStatus | .1.3.6.1.4.1.3902.3.104.1.1.1.1.10 |
| zxr10MplsL2vpnPWLocalEncapsulationType Local Mpls L2vpn PW encapsulation type. | column | MplsL2vpnPWEncapsulationType | .1.3.6.1.4.1.3902.3.104.1.1.1.1.12 |
| zxr10MplsL2vpnPWLocalLabel PW internal label locally allocated.If the label is not yet known,
the object should return a value of 0xFFFFFFFF. | column | Unsigned32 | .1.3.6.1.4.1.3902.3.104.1.1.1.1.13 |
| zxr10MplsL2vpnPWLocalCbit Local configuration of the control word. | column | MplsL2vpnPWCbit | .1.3.6.1.4.1.3902.3.104.1.1.1.1.14 |
| zxr10MplsL2vpnPWLocalPortName Name of local interface that PW has been configured on. | column | OctetString | .1.3.6.1.4.1.3902.3.104.1.1.1.1.15 |
| zxr10MplsL2vpnPWLocalRouterId Router ID of local PE. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3902.3.104.1.1.1.1.16 |
| zxr10MplsL2vpnPWLocalIfMtu Locally supported MTU size over the interface associated with the PW. | column | Unsigned32 | .1.3.6.1.4.1.3902.3.104.1.1.1.1.17 |
| zxr10MplsL2vpnPWRemoteGroupId Obtained from the Group ID field as received via the signaling protocol
used for PW setup. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.3.104.1.1.1.1.18 |
| zxr10MplsL2vpnPWRemoteEncapsulationType Remote Mpls L2vpn PW encapsulation type. | column | MplsL2vpnPWEncapsulationType | .1.3.6.1.4.1.3902.3.104.1.1.1.1.19 |
| zxr10MplsL2vpnPWType Type of PW:hub or spoke,used in H-VPLS. | column | MplsL2vpnPWType | .1.3.6.1.4.1.3902.3.104.1.1.1.1.2 |
| zxr10MplsL2vpnPWRemoteLabel PW internal label allocated by remote peer.If the label is not yet known,
the object should return a value of 0xFFFFFFFF. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.3.104.1.1.1.1.20 |
| zxr10MplsL2vpnPWRemoteCbit Remote configuration of the control word. | column | MplsL2vpnPWCbit | .1.3.6.1.4.1.3902.3.104.1.1.1.1.21 |
| zxr10MplsL2vpnPWRemotePortName Name of remote interface that PW has been configured on. | column | OctetString | .1.3.6.1.4.1.3902.3.104.1.1.1.1.22 |
| zxr10MplsL2vpnPWRemoteRouterId Router ID of remote PE. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3902.3.104.1.1.1.1.23 |
| zxr10MplsL2vpnPWRemoteIfMtu Supported MTU size of remote peer over the interface associated with the PW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.3.104.1.1.1.1.24 |
| zxr10MplsL2vpnPWEncapsulationType Mpls L2vpn PW encapsulation type. | column | MplsL2vpnPWEncapsulationType | .1.3.6.1.4.1.3902.3.104.1.1.1.1.3 |
| zxr10MplsL2vpnPWVlanid if zxr10MplsL2vpnPWEncapsulationType is eth-vlan type,this value represents
vlan id encapsulated for L2vpn interface.It will be zero otherwise. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.3.104.1.1.1.1.4 |
| zxr10MplsL2vpnPWPsnType Type of external tunnel for this PW to be carried on. | column | MplsL2vpnPWPsnType | .1.3.6.1.4.1.3902.3.104.1.1.1.1.5 |
| zxr10MplsL2vpnPWTunnelid If zxr10MplsL2vpnPWPsnType is TE tunnel,this value represents Id of TE tunnel
for this PW to be carried on. It will be zero otherwise. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.3.104.1.1.1.1.6 |
| zxr10MplsL2vpnPWInlabel The PW internal label used in the inbound direction,ie label locally allocated.
If the label is not yet known,the object should return a value of 0xFFFFFFFF. | column | Unsigned32 | .1.3.6.1.4.1.3902.3.104.1.1.1.1.7 |
| zxr10MplsL2vpnPWOutlabel The PW internal label used in the outbound direction,ie label allocated by remote
peer.If the label is not yet known,the object should return a value of 0xFFFFFFFF. | column | Unsigned32 | .1.3.6.1.4.1.3902.3.104.1.1.1.1.8 |
| zxr10MplsL2vpnPWCbit Defines if the control word will be sent with each packet by the local node. | column | MplsL2vpnPWCbit | .1.3.6.1.4.1.3902.3.104.1.1.1.1.9 |