zxPwCwStatus
ZXPW-STD-MIB ·
.1.3.6.1.4.1.3902.1015.1013.1.1.2.1.22
Object
column
ZXPW-TC-STD-MIBPwCwStatusTC
If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indicates if CW is to be present or not for this PW.
Context
- MIB
- ZXPW-STD-MIB
- OID
.1.3.6.1.4.1.3902.1015.1013.1.1.2.1.22- Type
- column
- Access
- readonly
- Status
- current
- Parent
- zxPwEntry
- Table
- zxPwTable
- Siblings
- 44
Syntax
ZXPW-TC-STD-MIBPwCwStatusTC
- Source
- ZXPW-TC-STD-MIBPwCwStatusTC
- Base type
Enumeration
Values & Constraints
Type Values
1 | waitingForNextMsg |
2 | sentWrongBitErrorCode |
3 | rxWithdrawWithWrongBitErrorCode |
4 | illegalReceivedBit |
5 | cwPresent |
6 | cwNotPresent |
7 | notYetKnown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxPwIndex Index for the conceptual row identifying a PW within
this PW Emulation table. | column | ZXPW-TC-STD-MIBPwIndexType | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.1 |
| zxPwAttachedPwIndex If the PW is attached to another PW instead of a local
native service, this item indicates the zxPwIndex of the
attached PW, and the PW specific entry in the service MIB
mo… | column | ZXPW-TC-STD-MIBPwIndexType | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.10 |
| zxPwIfIndex If the PW is represented in the ifTable as an ifIndex, this
item holds the ifIndex of the PW in the ifTable, otherwise
it MUST be set to zero. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.11 |
| zxPwID Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.
Applicable if zxPwOwner equal 'zxPwIdFecSignaling' or
'l2tpControlProtocol', should be set to zer… | column | ZXPW-TC-STD-MIBPwIDType | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.12 |
| zxPwLocalGroupID Used in the Group ID field sent to the peer PWES
within the maintenance protocol used for PW setup.
Applicable if zxPwOwner equal 'zxPwIdFecSignaling' or
'l2tpControlProto… | column | ZXPW-TC-STD-MIBPwGroupID | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.13 |
| zxPwGroupAttachmentID This object is an octet string representing the attachment
group identifier (AGI) this PW belongs too, which typically
identifies the VPN ID.
Applicable if zxPwOwner equal … | column | ZXPW-TC-STD-MIBPwAttachmentIdentifierType | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.14 |
| zxPwLocalAttachmentID This object is an octet string representing the local
forwarder attachment individual identifier (AII) to be
used by this PW. It is used as the SAII for outgoing
signalin… | column | ZXPW-TC-STD-MIBPwAttachmentIdentifierType | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.15 |
| zxPwPeerAttachmentID This object is an octet string representing the peer
forwarder attachment individual identifier (AII) to be
used by this PW. It is used as the TAII for outgoing
signaling… | column | ZXPW-TC-STD-MIBPwAttachmentIdentifierType | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.16 |
| zxPwCwPreference Defines if the control word will be sent with each packet
by the local node. Some PW types mandate the use of
control word, and is such cases the value configured has
no … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.17 |
| zxPwLocalIfMtu If not equal zero, the optional IfMtu object in the
signaling protocol will be sent with this value,
representing the locally supported MTU size over the
interface (or th… | column | Unsigned32 | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.18 |
| zxPwLocalIfString A PW MAY be associated to an interface (or a virtual
interface) in the ifTable of the node as part of the
service configuration. This object defines if the
maintenance pro… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.19 |
| zxPwType This value indicate the service to be carried over
this PW. | column | ZX-PWE3-MIBIANAPwTypeTC | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.2 |
| zxPwLocalCapabAdvert Indicates the capabilities to be advertised by this node
to the peer. | column | ZXPW-TC-STD-MIBPwCapabilities | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.20 |
| zxPwRemoteGroupID Obtained from the Group ID field as received via the
maintenance protocol used for PW setup, zero if not used.
Value of 0xFFFF shall be used if the object is yet to be
de… | column | ZXPW-TC-STD-MIBPwGroupID | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.21 |
| zxPwRemoteIfMtu The remote interface MTU as (optionally) received from the
remote node via the maintenance protocol. Should be zero
if this parameter is not available or not used. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.23 |
| zxPwRemoteIfString Indicates the interface description string as received by
the maintenance protocol, MUST be NULL string if not
applicable or not known yet. | column | OctetString | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.24 |
| zxPwRemoteCapabilities Indicates the capabilities as advertised by the peer. | column | ZXPW-TC-STD-MIBPwCapabilities | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.25 |
| zxPwFragmentCfgSize If set to value other than zero, indicates that
fragmentation is desired for this PW. | column | ZXPW-TC-STD-MIBPwFragSize | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.26 |
| zxPwRmtFragCapability The status of the fragmentation based on the local
configuration and the peer capabilities as advertised by
the peer if control protocol is used. | column | ZXPW-TC-STD-MIBPwFragStatus | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.27 |
| zxPwFcsRetentioncfg The local configuration of FCS retention for this PW. FCS
retention can be configured for PW types HDLC, PPP and
Ethernet only. If the agent does not support FCS retention … | column | Enumeration | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.28 |
| zxPwFcsRetentionStatus The status of the FCS retention negotiation process based on
local configuration and the remote advertisement.
remoteIndicationUnknown - set if a FEC has not been received
f… | column | Bits | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.29 |
| zxPwOwner Set by the operator to indicate the protocol responsible
for establishing this PW.
'manual' is used in all cases where no maintenance
protocol (PW signaling) is used to set… | column | Enumeration | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.3 |
| zxPwOutboundLabel The PW label used in the outbound direction (i.e. toward
the PSN). It may be set up manually if owner is 'manual'
or automatically otherwise. Examples: For MPLS PSN, it
r… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.30 |
| zxPwInboundLabel The PW label used in the inbound direction (i.e. packets
received from the PSN. It may be set up manually if owner
is 'manual' or automatically otherwise.
Examples: For MP… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.31 |
| zxPwName The canonical name assigned to the PW. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.32 |
| zxPwDescr A textual string containing information about the PW.
If there is no description this object contains a zero
length string. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.33 |
| zxPwCreateTime System time when this PW was created. | column | OctetString | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.34 |
| zxPwUpTime Specifies the total time this PW operStatus has been
Up(1). | column | OctetString | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.35 |
| zxPwLastChange The value of sysUpTime at the time the PW entered
its current operational state. If the current state was
entered prior to the last re-initialization of the local
network m… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.36 |
| zxPwAdminStatus The desired operational status of this PW. | column | Enumeration | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.37 |
| zxPwOperStatus This object indicates the operational status of the PW, it
does not reflect the status of the CE bound interface.
It is set to down only if pwNotForwarding,
psnFacingPwRx… | column | ZXPW-TC-STD-MIBPwOperStatusTC | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.38 |
| zxPwLocalStatus Indicates the status of the PW in the local node.
The various indications in this object should be
available independent of the ability of the local node to
advertise them… | column | ZXPW-TC-STD-MIBPwStatus | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.39 |
| zxPwPsnType Set by the operator to indicate the PSN type. Based on
this object, the relevant PSN table entries are created
in the in the PSN specific MIB modules. | column | ZX-PWE3-MIBIANAPwPsnTypeTC | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.4 |
| zxPwRemoteStatusCapable Indicates the remote node capability to advertise the
PW status notification.
notAppicable should be reported for manually set PW, or
if the local node is not capable of s… | column | Enumeration | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.40 |
| zxPwRemoteStatus Indicates the status of the PW as was advertised by the
remote. If the remote is not capable of advertising the
status object, or the local node is not able t… | column | ZXPW-TC-STD-MIBPwStatus | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.41 |
| zxPwTimeElapsed The number of seconds, including partial seconds,
that have elapsed since the beginning of the current
interval measurement period. | column | HC-PerfHist-TC-MIBHCPerfTimeElapsed | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.42 |
| zxPwValidIntervals The number of previous 15-minute intervals
for which data was collected. | column | HC-PerfHist-TC-MIBHCPerfValidIntervals | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.43 |
| zxPwRowStatus For creating, modifying, and deleting this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.44 |
| zxPwStorageType This variable indicates the storage type for this
object. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.45 |
| zxPwPeerTos | column | Integer32 | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.46 |
| zxPwSetUpPriority This object defines the relative set-up priority of the PW
in a lowest-to-highest fashion, where 0 is the highest
priority. PWs with the same priority are treated with
eq… | column | Integer32 | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.5 |
| zxPwHoldingPriority This object defines the relative holding priority of the
PW in a lowest-to-highest fashion, where 0 is the highest
priority. PWs with the same priority are treated with
equ… | column | Integer32 | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.6 |
| zxPwPeerAddrType Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.8 |
| zxPwPeerAddr This object contains the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(zxPwPe… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.9 |