zxGponVoIPConfigDataConfigAddress
ZXGPON-ONTMGMT-MIB ·
.1.3.6.1.4.1.3902.1012.3.50.17.2.1.5
Object
column
r/w
OctetString
If this attribute is set to any value other than 0xFFFF, it points to a Network Address managed entity. In this case, the Network Address ME indicates the address of the server to contact using the method indicated in the VoIP Configuration Method Used attribute of the VoIP Service ME. If this attribute is set to 0xFFFF, an address is not defined by this attribute. However, the address may be defined by other methods such as deriving the address from the ONT Identifier attribute of the IP Host Config Data ME, and using a well-known URI schema. Default value is 0xFFFF (R, W) (mandatory) (2 bytes) Attention!! We hide the Network Address ME, using OCTET STRING instead! But now, it may be unused.
Context
- MIB
- ZXGPON-ONTMGMT-MIB
- OID
.1.3.6.1.4.1.3902.1012.3.50.17.2.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxGponVoIPConfigDataEntry
- Table
- zxGponVoIPConfigDataTable
- Siblings
- 17
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxGponVoIPConfigDataAvailableSignalProtocol This attribute defines, using a bitmap, the VoIP Signaling Protocols supported in the
ONT. Valid bitmap values are:
0x00 = s, VoIP not supported
0x01 = SIP
0x02 = H.248
0x04 = M… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.1 |
| zxGponVoIPLineName Line name sequence number.The default value is
null(all zero bytes) | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.10 |
| zxGponVoIPIpAllocMode VoIP allocate mode. | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.11 |
| zxGponVoIPCfgSvrValidateScheme User Validation Scheme. | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.12 |
| zxGponVoIPCfgSvrUsername User name for validation. | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.13 |
| zxGponVoIPCfgSvrPassword Password for validation. | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.14 |
| zxGponVoIPCfgSvrRealm A string to be displayed to users so they know which user name
and password to use. This string should contain at least the name
of the host performing the authentication and m… | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.15 |
| zxGponVoIPCfgSvrRetrieveFile This attribute is an action. It will be set independently
to notify ONU to retrieve file again. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.16 |
| zxGponVoIPCfgSvrRetrieveFileVer This attribute indicates the version of the latest retrieved file. | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.17 |
| zxGponVoIPCfgStatus Indicates the status of the ONU VoIP service.
Inactive: configuration retrieval has not been attempted
Active: configuration was retrieved
Initializing: configuration is now being… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.18 |
| zxGponVoIPConfigDataSignalProtocolUsed This attribute identifies the type of VoIP signaling protocol used for ONT.
Only one type of protocol is allowed. Valid values are:
0x00 = None
0x01 = SIP
0x02 = H.248
0x03 = M… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.2 |
| zxGponVoIPConfigDataAvailableConfigMethod This attribute indicates, using a bitmap, the capabilities of the ONT with regard to VoIP service configuration:
0x0001 indicates that the ONT is capable of using OMCI to configur… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.3 |
| zxGponVoIPConfigDataConfigMethodUsed Indicates to the ONT, which method should be used to configure the VoIP Service of the ONT.
0x00 the ONT default - do not configure.
0x01 indicate use of OMCI for VoIP service co… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.4 |
| zxGponVoIPOnuDomainName ONU domain name is used to locate ONU by SS when the mode of MG
registered to SS is using domain name. | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.6 |
| zxGponVoIPH248EquipName ONU equipment name is used to locate ONU by SS when the mode of MG
registered to SS is using equipment name. | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.7 |
| zxGponVoIPH248RegMode This attribute specifies MID flag. | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.8 |
| zxGponVoIPMgcRegMode This attribute specifies register mode. | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.17.2.1.9 |