zxGponVideoAniSignalLevelMax
ZXGPON-ONTMGMT-MIB ·
.1.3.6.1.4.1.3902.1012.3.50.19.3.1.11
Object
This attribute indicates the maximum optical RF power per channel that results in a CTB of -57 dBc for an 80-channel ensemble of carriers at a per-channel optical modulation index of 3.5%.
Context
- MIB
- ZXGPON-ONTMGMT-MIB
- OID
.1.3.6.1.4.1.3902.1012.3.50.19.3.1.11- Type
- column
- Access
- readonly
- Status
- current
- Units
- dBuW
- Parent
- zxGponPptpVideoAniEntry
- Table
- zxGponPptpVideoAniTable
- Siblings
- 15
Syntax
dBuW SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxGponVideoAniAdminState This attribute is used to activate (unlock: value 0x00) and
deactivate (lock: value 0x01) the functions performed by
instances of this managed entity.(1 byte) | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.1 |
| zxGponVideoAniSignalLevelMin This attribute indicates the minimum optical RF power per channel
that results in a CNR of 47 dBc for a channel of 4.5 MHz bandwidth
at a receive optical power of -5 dBm. | column | dBuW SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.10 |
| zxGponVideoAniPilotFrequency This attribute specifies the frequency of the pilot channel receiver.
The unit of this attribute is Hz.
If signal capability = 1, 2, 7 or 8, this attribute is undefined.
If signa… | column | Hz Unsigned32 | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.12 |
| zxGponVideoAniAgcMode This attribute allows the discovery and configuration of
the ONU's AGC capabilities. The attribute contains a code point
for several AGC types.
The ONU displays the currently u… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.13 |
| zxGponVideoAniAgcValue This attribute indicates the measurement offset that the ONU should
use in AGC. The attribute has a step size of 0.1 dB, represented as
a signed integer. | column | 0.1 dB Integer32 | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.14 |
| zxGponVideoAniLowerOpticalThresh This attribute specifies the optical level used to declare
the video OOR low alarm.
Valid values are -12 to +6 dBm in 0.1 dB increments, represented as
a 2s complement integer. … | column | 0.1 dBm Integer32 | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.15 |
| zxGponVideoAniUpperOpticalThresh This attribute specifies the optical level used to declare
the video OOR high alarm.
Valid values are -12 to +6 dBm in 0.1 dB increments, represented as
a 2s complement integer.… | column | 0.1 dBm Integer32 | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.16 |
| zxGponVideoAniOperState This attribute indicates whether or not this managed entity is
capable of performing its task. The operational state reflects
the perceived ability to receive or to generate a v… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.2 |
| zxGponVideoAniArc This attribute is used to control alarm reporting from
this managed entity.
See A.1.4.3 for a complete description.(1 byte) | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.3 |
| zxGponVideoAniArcInterval This attribute provides a provisionable length of time.
The special value 255 means that the timer never expires.
See A.1.4.3 for a complete description.(1 byte) | column | min Integer32 | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.4 |
| zxGponVideoAniFreqRangeLow This attribute indicates the lower of the two possible frequency
ranges supported.
Different frequency ranges are indicated by code points:
noLowBand(1): No low band
fro… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.5 |
| zxGponVideoAniFreqRangeHigh This attribute indicates the higher of the two frequency
ranges supported.
Different frequency ranges are indicated by code points:
noHighBand(1): No high band
from550to… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.6 |
| zxGponVideoAniSignalCapability This attribute indicates the capability of the ONU to measure
the video signal level.
Capabilities are indicated by code points:
noCapability(1): No signal level measurement… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.7 |
| zxGponVideoAniOpticalSignalLevel This attribute is an unsigned integer that returns
the current measurement of the total optical signal level.
If signal capability = 1, 3, 5 or 7, this attribute is undefined… | column | dBuW SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.8 |
| zxGponVideoAniPilotSignalLevel This attribute indicates the current measurement
of the pilot signal level or broadband RF level.
If signal capability = 1 or 2, then this attribute is undefined.
If si… | column | dBuV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.19.3.1.9 |