zxGponPonAlarmDisableInterval
ZXGPON-ONTMGMT-MIB ·
.1.3.6.1.4.1.3902.1012.3.50.12.1.1.9
Object
Alarm reporting control interval. 0: Allow alarm reporting immediately when port is trouble free. 1-254: The duration in minutes for alarm suppression. 255: Suppress alarm reporting until alarm is enabled. (1 byte)
Context
- MIB
- ZXGPON-ONTMGMT-MIB
- OID
.1.3.6.1.4.1.3902.1012.3.50.12.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxGponPonEntry
- Table
- zxGponPonTable
- Siblings
- 24
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxGponPonSRInd This Boolean attribute indicates the capability of status reporting. The
value TRUE means that the status reporting is available for all T-CONTs which
are associated with the ANI… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.1 |
| zxGponPonRxOpticalLevel This attribute reports the current measurement of total
optical signal level at 1490 nm. Its value is a 2s complement
integer referred to 1 mW (ie dBm), with 0.002 dB granularit… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.10 |
| zxGponPonLowerRxOpticalThreshold This attribute specifies the optical level the ONT uses to
declare the 1490 nm low received optical power alarm.
Valid values are -127 dBm (coded as 254) to 0 dBm (coded as 0)
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.11 |
| zxGponPonUpperRxOpticalThreshold This attribute specifies the optical level the ONT uses to
declare the 1490 nm high received optical power alarm.
Valid values are -127 dBm (coded as 254) to 0 dBm (coded as 0) … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.12 |
| zxGponPonOntResponseTime This attribute indicates actual ONT response time recorded by ONT.
The unit is nanoseconds.(2 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.13 |
| zxGponPonTxOpticalLevel This attribute reports the current measurement of optical
transmit power level. Its value is a 2s complement integer
referred to 1 mW (ie dBm), with 0.002 dB granularity.(2 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.14 |
| zxGponPonLowerTxOpticalThreshold This attribute specifies the transmit power level the ONT uses to
declare the low transmit optical power alarm. Its value is a 2s complement
integer referred to 1 mW (ie dBm), w… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.15 |
| zxGponPonUpperTxOpticalThreshold This attribute specifies the transmit power level the ONT uses to
declare the high transmit optical power alarm. Its value is a 2s complement
integer referred to 1 mW (ie dBm), … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.16 |
| zxGponPonPowerFeedVoltage DC voltage, 2s complement, 20 mV resolution.(2 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.17 |
| zxGponPonLaserBiasCurrent 2s complement, 2 uA resolution.(2 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.18 |
| zxGponPonTemperature 2s complement, 1/256 degree C resolution.(2 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.19 |
| zxGponPonTotalTcontNum This attribu provides the total number of T-CONTs that are able to be supported
in this ANI port.(2 bytes) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.2 |
| zxGponPonLowerVoltageThreshold (2 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.20 |
| zxGponPonUpperVoltageThreshold (2 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.21 |
| zxGponPonLowerCurrentThreshold (2 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.22 |
| zxGponPonUpperCurrentThreshold (2 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.23 |
| zxGponPonLowerTemperatureThreshold (2 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.24 |
| zxGponPonUpperTemperatureThreshold (2 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.25 |
| zxGponPonGemBlockLen This attribute indicates the reporting block size for GEM mode in units of bytes.
The value which the OLT sets is used by all T-CONTs in this ANI.
Upon autonomous instantiation t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.3 |
| zxGponPonPiggybackDBAReporting The following coding is used to indicate the ONT's piggyback DBA reporting
mode capabilities:
0x00: supports mode 0 only;
0x01: supports modes 0 and 1;
0x02: supports modes 0 and… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.4 |
| zxGponPonWholeOnuDBAReporting Valid values are 0x00 (whole ONU DBA reporting is not supported)
and 0x01 (whole ONU DBA reporting is supported).(1 byte) | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.5 |
| zxGponPonSFThreshold This attribute represents the upstream/downstream BER threshold to detect SFi/SF alarm.
When this value is y in decimal, the BER threshold for SFi/SF is 10^(-y).
The valid values… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.6 |
| zxGponPonSDThreshold This attribute represents the upstream/downstream BER threshold to detect SDi/SD alarm.
When this value is x in decimal, the BER threshold for SDi/SD is 10^(-x).
The valid values… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.7 |
| zxGponPonAlarmReport Alarm reporting control.
0(enable): Allow alarm reporting, 1(disable): Suppress alarm reporting.(1 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.12.1.1.8 |