zxGponONTSecurityCap
ZXGPON-ONTMGMT-MIB ·
.1.3.6.1.4.1.3902.1012.3.50.11.2.1.12
Object
column
Integer32
This attribute is used to advertise the advanced security modes of the ONT. The following codepoints are defined: 0: Reserved for future use; 1: AES encryption of the downstream payload is supported; 2..255: Reserved for future use.(1 byte)
Context
- MIB
- ZXGPON-ONTMGMT-MIB
- OID
.1.3.6.1.4.1.3902.1012.3.50.11.2.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- zxGponONTEntry
- Table
- zxGponONTTable
- Siblings
- 20
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxGponONTVendorId This attribute identifies the vendor of the ONT, and is the same as the 4 most significant bytes of the ONT serial number as specified in ITU-T Rec. G.983.1.
Upon autonomous inst… | column | OntVendorId | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.1 |
| zxGponONTOmccVersion This attribute is used to identify the specific version of the OMCC
protocol being used by the ONT. This is used to allow the OLT to manage a
network with ONTs that support dif… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.10 |
| zxGponONTVendorProductCode This attribute is used to provide a vendor-specific product code for the ONT.(2 bytes) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.11 |
| zxGponONTSecurityMode This attribute is used to select the advanced security mode for the ONT.
Note that all secure VPs/VCs or GEM ports in an ONT must use the same security mode at
any time. The follo… | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.13 |
| zxGponONTTotalPrioQueueNum This attribute provides a total number of priority queues which are not associated with the PON IF circuit pack.
Maximum value is 0x0FFF. Upautonomous instantiation, this attribu… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.14 |
| zxGponONTTotalTrafficSchNum This attribute provides a total number of Traffic Schedulers which
are not associated with the PON IF circuit pack. The ONT supports NULL function,
HOL scheduling and WRR from t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.15 |
| zxGponONTMode This attribute identifies whether the ONT can operate in ATM-only mode (0x00),
GEM-only mode (0x01), or dual (both ATM and GEM) mode (0x02).(1 byte) | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.16 |
| zxGponOnuActualType This attribute identifies ONU actual type. | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.17 |
| zxGponOnuSurvivalTime This attribute indicates the minimum guaranteed time in
milliseconds between the loss of external power and the silence of
the ONU. This does not include survival time attributa… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.18 |
| zxGponOnuTotalGemPortNum This attribute reports the total number of GEM port-IDs
supported by the ONU. The maximum value is specified in the
corresponding TC recommendation [ITU-T G.984.3] or… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.19 |
| zxGponONTVersion This attribute identifies the version of the ONT as defined by the vendor. The printable value of '0'
is used when version information is not available or applicable to the ONT b… | column | OntVersionId | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.2 |
| zxGponOnuSysUpTime This attribute counts 10 ms intervals since the ONU was last
initialized. It rolls over to 0 when full (see [IETF RFC 1213]).
(R) (optional) (4 bytes) | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.20 |
| zxGponOnuAlias This attribute identifies ONU alias. | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.21 |
| zxGponONTSerialNum The serial number is unique for each ONT.
The first four bytes are the ASCII encoded vendor ID four letter mnemonic.
The second four bytes are a binary encoded 'serial number', u… | column | OntSerialNumber | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.3 |
| zxGponONTTrafficOpt This attribute identifies the upstream traffic management function implememted
in the ONT.
1) 'Priority controlled and flexibly scheduled upstream traffic' (0x00): The traffic
sc… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.4 |
| zxGponONTVpVcCrossOpt It identifies the support of ATM VP or VC cross-connection management
functions for the interworking connections to non ATM UNIs.
0 means no cross-connection management functions… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.5 |
| zxGponONTBatteryBackup This attribute provides a Boolean indication of whether or not the ONT/NT supports battery backup.
False will indicate that no battery is provisioned; true indicates that a batter… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.6 |
| zxGponONTAdminState This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01)
the functions performed by instances of this managed entity.(1 byte) | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.7 |
| zxGponONTOperState This attribute indicates whether or not a managed entity is capable of
performing its task. Valid values are enabled (0x00) and disabled (0x01).(1 byte) | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.8 |
| zxGponONTEquipId This attribute may be used to identify the specific type of ONT. In North America,
this may be used for the equipment CLEI code.(20 bytes) | column | OntEquipmentId | .1.3.6.1.4.1.3902.1012.3.50.11.2.1.9 |