zxGponMGCConfigDataMaxRetryAttempts
ZXGPON-ONTMGMT-MIB ·
.1.3.6.1.4.1.3902.1012.3.50.17.7.1.17
Object
This attribute specifies the maximum number of times a message is retransmitted to the MGC. The default value 0 specifies vendor-specific implementation (R, W, Set-by-create) (optional) (2 bytes)
Context
- MIB
- ZXGPON-ONTMGMT-MIB
- OID
.1.3.6.1.4.1.3902.1012.3.50.17.7.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxGponMGCConfigDataEntry
- Table
- zxGponMGCConfigDataTable
- Siblings
- 20
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxGponMGCConfigDataId This attribute provides a unique number for each instance of this managed entity.
(1~n)(R, Set-by-create) (mandatory) (2 bytes) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.1 |
| zxGponMGCConfigDataSecondaryPassword | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.10 |
| zxGponMGCConfigDataSecondaryRealm | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.11 |
| zxGponMGCConfigDataTCPUDPPort This attribute specifies the port(1~65535) of TCP/UDP used for communication
with the MGC. (R, W, Set-by-create) (mandatory) (2 bytes) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.12 |
| zxGponMGCConfigDataHostId | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.13 |
| zxGponMGCConfigDataVersion This integer attribute reports the version(1~255) of the Megaco protocol in use.
(R, W, Set-by-create) (mandatory) (1 byte) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.14 |
| zxGponMGCConfigDataMessageFormat This attribute defines the message format. Valid values are:
0 Text long
1 Text short
2 Binary
The default value is 0. (R, W, Set-by-create) (mandatory) (1 byte) | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.15 |
| zxGponMGCConfigDataMaxRetryTime This attribute specifies the maximum retry time for MGC transactions, in seconds.
The default value 0 specifies vendor-specific implementation (R, W) (optional) (2 bytes) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.16 |
| zxGponMGCConfigDataServiceChangeDelay The attribute specifies the service status delay time for changes in line service
status. This attribute is specified in seconds. The default value 0 specifies no
delay. (R, W) (… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.18 |
| zxGponMGCConfigDataTerminationIDbase The attribute specifies the base string for the H.248 physical termination id(s)
for this ONT. This string is intended to uniquely identify an ONT. Vendor specific
termination ide… | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.19 |
| zxGponMGCConfigDataPrimaryMGC This attribute points to a network address ME that contains the name (IP address
or resolved name) of the primary MGC that controls the signalling messages. The
port is optiona… | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.2 |
| zxGponMGCConfigDataSSVendor This attribute identifies the gateway softswitch vendor.
The format is four ASCII coded alphabetic characters [A..Z] as defined in ANSI T1.220.
A value of four null characters i… | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.20 |
| zxGponMGCConfigDataEntryStatus This attribute specifies the action of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.21 |
| zxGponMGCConfigDataPrimaryValidateScheme | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.3 |
| zxGponMGCConfigDataPrimaryUsername | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.4 |
| zxGponMGCConfigDataPrimaryPassword | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.5 |
| zxGponMGCConfigDataPrimaryRealm | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.6 |
| zxGponMGCConfigDataSecondaryMGC This attribute points to a network address ME that contains the name (IP address
or resolved name) of the secondary or backup MGC that controls the signalling
messages. The port… | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.7 |
| zxGponMGCConfigDataSecondaryValidateScheme | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.8 |
| zxGponMGCConfigDataSecondaryUsername | column | OctetString | .1.3.6.1.4.1.3902.1012.3.50.17.7.1.9 |