zxGponCESoETHExpSignallingECID
ZXGPON-ONTMGMT-MIB ·
.1.3.6.1.4.1.3902.1012.3.50.18.2.1.5
Object
reference to Expected circuit ID in G.984.4 9.8.5 Pseudowire termination point, This attribute is a pair of ECID (Ethernet circuit ID) values that the ONT can expect in the direction from the packet-switched network toward the TDM termination. This is the second which is used for the optional separate signalling ECID. In both cases, default value 0 indicates that no ECID checking is expected..(4 bytes).
Context
- MIB
- ZXGPON-ONTMGMT-MIB
- OID
.1.3.6.1.4.1.3902.1012.3.50.18.2.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxGponCESoETHConfigEntry
- Table
- zxGponCESoETHConfigTable
- Siblings
- 12
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxGponCESoETHBridgeIndex This attribute indicates the index of MAC bridge in ONT, from 1 to M.
The first byte specifies the slot Id associated with this MAC bridge;
the second byte specifies the bridge gr… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.18.2.1.1 |
| zxGponCESoETHSrcMac This attribute specifies the near-end MAC address. It is established by non-OMCI means (eg factory
programmed into ONT flash memory) and included here for information only.(R)(ma… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3902.1012.3.50.18.2.1.10 |
| zxGponCESoETHDstMac This attribute specifies the MAC address of the destination Ethernet frames.
(R, W, Set-by-create) (mandatory) (6 bytes) | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3902.1012.3.50.18.2.1.11 |
| zxGponCESoETHLoopback This attribute sets the loopback configuration:
0 No loopback
1 Loopback of downstream traffic at MAC client(R, W) (mandatory) (1 byte) | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.18.2.1.12 |
| zxGponCESoETHTxPayloadECID reference to Transmit circuit ID in G.984.4 9.8.5 Pseudowire termination point,
This attribute is a pair of ECID (Ethernet circuit ID)values that the ONT transmits
in the dire… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.18.2.1.2 |
| zxGponCESoETHEntryStatus This attribute specifies the action of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1012.3.50.18.2.1.20 |
| zxGponCESoETHTxSignallingECID reference to Transmit circuit ID in G.984.4 9.8.5 Pseudowire termination point,
this is the second which is required only if signalling is to be carried in a distinct channel. … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.18.2.1.3 |
| zxGponCESoETHExpPayloadECID reference to Expected circuit ID in G.984.4 9.8.5 Pseudowire termination point,
This attribute is a pair of ECID (Ethernet circuit ID) values that the ONT can
expect in the di… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.18.2.1.4 |
| zxGponCESoETHRecvPayloadECID reference to Received circuit ID in G.984.4 9.8.5 Pseudowire termination point,
This attribute is a pair of ECID (Ethernet circuit ID) values that the ONT can
expect in the di… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.18.2.1.6 |
| zxGponCESoETHRecvSignallingECID reference to Received circuit ID in G.984.4 9.8.5 Pseudowire termination point,
This attribute is a pair of ECID (Ethernet circuit ID) values that the ONT can
expect in the di… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.18.2.1.7 |
| zxGponCESoETHTagPolicy This attribute specifies the tagging policy to be applied to upstream Ethernet frames.(1 byte) | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.50.18.2.1.8 |
| zxGponCESoETHVlanTagVal If the tag policy calls for tagging of upstream Ethernet frames, this attribute specifies the tag
control information, which includes the VLAN tag, P bits and CFI bit. (R, W) (op… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1012.3.50.18.2.1.9 |