dot3MpcpAdminState
ZXEPON-SERVICE-MIB ·
.1.3.6.1.4.1.3902.1015.1010.1.2.1.1.2
Object
This object is used to define the admin state of the Multi-Point MAC Control sublayer, as defined in [802.3ah] clause 64, and to reflect its state. When selecting the value as true(1) the Multi-Point control protocol of the interface is enabled. When selecting the value as false(2) the Multi-Point Control protocol of the interface is disabled. This object reflects the administrative state of the Multi-Point control protocol of the interface. The write operation is not restricted in this document and can be done at any time. Changing dot3MpcpAdminState state can lead to disabling the Multi-point control protocol on the respective interface leading to the interruption of service of the users connected to the respective EPON interface. This object is applicable for an OLT, with the same value for all virtual interfaces, and for an ONU.
Context
- MIB
- ZXEPON-SERVICE-MIB
- OID
.1.3.6.1.4.1.3902.1015.1010.1.2.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dot3MpcpControlEntry
- Table
- dot3MpcpControlTable
- Siblings
- 10
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot3MpcpOperStatus This object reflects the operational state of the Multi-Point
MAC Control sublayer, as defined in [802.3ah] clause 64. When
the value is true(1) the interface will act as if Mul… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1010.1.2.1.1.1 |
| dot3MpcpRoundTripTime An object that reports the MPCP round trip time in increments of Time
Quanta (TQ)-16ns. The value returned shall be (round trip time in ns)/16.
If this value exceeds (2^16-1) th… | column | TQ (16nsec) Unsigned32 | .1.3.6.1.4.1.3902.1015.1010.1.2.1.1.10 |
| dot3MpcpMaximumPendingGrants An object that reports the maximum number of grants which an ONU can
store for handling. The maximum number of grants which an ONU can store
for handling has a range of 0 to 255… | column | Unsigned32 | .1.3.6.1.4.1.3902.1015.1010.1.2.1.1.11 |
| dot3MpcpMode This object is used to identify the operational state of the Multi-Point
MAC Control sublayer. Reading olt(1)for an OLT (server) mode and onu(2)
for an ONU (client) mode. This o… | column | Enumeration | .1.3.6.1.4.1.3902.1015.1010.1.2.1.1.3 |
| dot3MpcpSyncTime An object that reports the 'sync lock time' of the OLT receiver in
increments of Time Quanta. The value returned shall be (sync lock
time ns)/16. If this value exceeds (2^32-1) … | column | TQ (16nsec) SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1010.1.2.1.1.4 |
| dot3MpcpLinkID An object that identifies the Logical Link identifier (LLID) associated
with the MAC of the virtual link. This object is applicable for an OLT
and an ONU. At the OLT it has a di… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1010.1.2.1.1.5 |
| dot3MpcpRemoteMACAddress An object that identifies the source_address parameter of the last
MPCPDUs passed to the MAC Control. This value is updated on reception
of a valid frame with (1) a destination … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3902.1015.1010.1.2.1.1.6 |
| dot3MpcpRegistrationState An object that identifies the registration state of the Multi-Point
MAC Control sublayer. When this object has the enumeration unregistered(1)
the interface is unregistered and … | column | Enumeration | .1.3.6.1.4.1.3902.1015.1010.1.2.1.1.7 |
| dot3MpcpTransmitElapsed An object that reports the interval from last MPCP frame transmission
in increments of Time Quanta (TQ)-16ns. The value returned shall be
(interval from last MPCP frame transmis… | column | TQ (16nsec) SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1010.1.2.1.1.8 |
| dot3MpcpReceiveElapsed An object that reports the interval from last MPCP frame reception
in increments of Time Quanta (TQ)-16ns. The value returned shall be
(interval from last MPCP frame reception i… | column | TQ (16nsec) SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1010.1.2.1.1.9 |