dot3ExtPkgObjectFecEnabled – ZXEPON-SERVICE-MIB

Object

column r/w Enumeration

An object defining the FEC mode of operation of the interface, and 
indicating its state. The modes defined in this object are extensions 
to the FEC modes defined in the dot3EponFecMode object. When noFECEnabled 
(1) the interface does not enable FEC mode. When fecTxEnabled (2) the 
interface enables the FEC transmit mode. When fecRxEnabled (3) the 
interface enables the FEC receive mode. When fecTxRxEnabled (4) the 
interface enables the FEC transmit and receive mode. This object is 
applicable for an OLT and an ONU. At the OLT it has a distinct value 
for each virtual interface. The FEC counters are referring to the 
receive path. The FEC counters will stop when the FEC receive mode 
of the interface is disabled, as defined by fecRxEnabled (3) and 
fecTxRxEnabled (4) values. The counters: dot3EponFecPCSCodingViolation 
- not affected by FEC mode. dot3EponFecCorrectedBlocks - stops counting 
when Rx_FEC is not enabled. (noFecEnabled (1) and fecTxEnabled (2)). 
dot3EponFecUncorrectableBlocks - stops counting when Rx_FEC is not enabled 
(noFecEnabled (1) and fecTxEnabled (2)). dot3EponFecBufferHeadCodingViolation
 - stops counting when Rx_FEC is not enabled (noFecEnabled (1) and 
 fecTxEnabled (2)). The objects: dot3EponFecAbility - indicates the FEC 
 ability and is not affected by the FEC mode. dot3EponFecMode - indicates 
 the FEC mode for combined RX and TX. The write operation is not restricted 
 in this document and can be done at any time. Changing dot3ExtPkgObjectFecEnabled 
 state can lead to disabling the Forward error correction on the respective 
 interface which can lead to a degradation of the optical link and therefore 
 may lead to an interruption of service of the users connected to the 
 respective EPON interface.

Context

MIB: ZXEPON-SERVICE-MIB
OID: .1.3.6.1.4.1.3902.1015.1010.1.5.1.1.1.4
Type: column
Access: readwrite
Status: current
Parent: dot3ExtPkgControlEntry
Table: dot3ExtPkgControlTable
Siblings: 5

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	noFecEnabled
`2`	fecTxEnabled
`3`	fecRxEnabled
`4`	fecTxRxEnabled

Related Objects

Sibling Objects

Object	Type	Syntax	OID
dot3ExtPkgObjectReset This object is used to reset the EPON interface. The interface may be unavailable while the reset occurs and data may be lost. Setting this object to running(1) will cause the i…	column	Enumeration	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.1.1.1`
dot3ExtPkgObjectPowerDown This object is used to power down the EPON interface. The interface may be unavailable while the power down occurs and data may be lost. Setting this object to true(1) will caus…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.1.1.2`
dot3ExtPkgObjectNumberOfLLIDs A read only object which indicates the number of registered LLIDs. Initialization value is 0. This object is applicable for an OLT, with the same value for all virtual interface…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.1.1.3`
dot3ExtPkgObjectReportMaximumNumQueues An object, that defines the maximal number of queues in the REPORT message, as defined in [802.3ah] 64. For further information please see the description of the queue table. Th…	column	Unsigned32	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.1.1.5`
dot3ExtPkgObjectRegisterAction An object configuring the registration state of an interface, and indicating its registration state. Write operation changes the registration state to its new value. Read operat…	column	Enumeration	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.1.1.6`