zxDslSysCompatible

The compatibility of DSLAM. Every bit denotes the 
compatibility of some function. If the value of the 
bit is 1, the related function has compatible problem.
The related function of the first bit is the naming 
rules of string.
          
bit 1: QoS Flow Policy of NE supports CCoS.
bit 2: zxDslInBandIpUseType.  value 1 of this bit means normalSecondary(5), 0 means normalSecondary(3).
bit 3: zxDslSyslog. value 1 means use zxDslSyslogHostTable, value 0 means just scalar value for Finland test.
bit 4: zxDslTrapHostTable. value 1 means support event level and type.
bit 5: QoS Queue Expand,include zxDslQosSchedulerID and zxDslQos8021p2CosQPortNumber. value 1 means zxDslQosSchedulerID 
       and zxDslQos8021p2CosQPortNumber support UNI-ETCA.
bit 6: Different unit of ifLastChange, value 1 means 10 millisecond, 0 means 1 second.
bit 7: value 1 means support IAP Igmp and Multicast MIB.
bit 8: value 1 means support a200mgcinfo in a200mgccfgTable.
bit 9: value 1 means support zxDslPortLocationIfaceDhcpv6Enable and Dhcpv6OptionTrust in zxDslPortLocationIfaceTable.
bit 10: value 1 means support IPV6.
bit 11: value 1 means support zxAnMvlanHostVersion.                       
bit 12: For port egress QoS policy, value 1 means support zxDslQosPortEgressPolicyTable.
bit 13: value 1 means support zxDslPortLocationIfaceCircuitIdSyntaxPrfName and zxDslPortLocationIfaceActualCircuitId
        in zxDslPortLocationIfaceTable.             
bit 14: value 1 means support VdslDataRateTrap.            
bit 15: value 1 means support zxDslDhcpv6PvcIfIpSourceGuardEnable,zxDslDhcpv6IfDhcpSnoopingEnable and zxDslDhcpv6IfDhcpSnoopingLimit
        for DHCPv6 in zxDslDhcpPvcIfTable and zxDslDhcpIfTable.      
bit 16: value 1 means flowcontrol inndependent to auto-negotiation.            
bit 17: value 1 means zxDslFtpManagedObjectType support DSL_PORT_INFO.      
bit 18: value 1 means support zxDslMacAddressExtTable. 
bit 19: value 1 means support pccw DSL_PORT_INFO (Modem Vendor, Modem Serial Number, Modem Firmware).  
bit 20: value 1 means support aturInitFailureTrapEnable of ADSL and atucInitFailureTrapEnable and aturInitFailureTrapEnable of VDSL.
bit 21: value 1 means support zxVoiceFlowStatisticRecordTime in zxVoipVoiceFlowStatisticTable.
bit 22: value 1 means support a200sipproxysvrPort in a200sipproxysvrTable and the range of a200sipproxysvrindex is 1..4.
bit 23: value 1 means support zxDslPortPppoeSyntaxPrfName and zxDslPortActPppoeCircuitId in zxDslPortLocationIfaceTable.
bit 24: value 1 means support a200slcFeedCurrent in a200slcTable and
        msagSlcHighImpedacneOper and msagSlcNoneHighImpedanceOper in msagSlcCtrlTable.
bit 25: value 1 means support a200sipproxysvrInfo and a200sipproxysvrDomainName in a200sipproxysvrTable. 
bit 26: value 1 means support G.INP for VDSL Line.
bit 27: value 1 means support G.INP for ADSL Line.
bit 28: value 1 means support DPBO,PSDMASK(PSD mask) 
        and TXREFVN(transmitter referred virtual noise)
        for ADSL Line.
bit 29: value 1 means support zxDslDevSecAclDestIpType,
        zxDslDevSecAclDestIp,
        zxDslDevSecAclDestIpMask, 
        zxDslDevSecAclDestIpv6PfxLen,
        zxDslDevSecAclEtherType,
        zxDslDevSecAclVlan 
        and zxDslDevSecAclPktRateLimit
        in zxDslDevSecurityAclTable.
bit 30: value 1 means support pccw DSL_PORT_INFO (Modem Mode).

MIB

ZTE-DSL-SYSCTRL-MIB

OID

.1.3.6.1.4.1.3902.1004.3.3.1

Type

scalar

Access

readonly

Status

current

Parent

zxDslSysCompatibility