zxDslEnvCtrlObjects
ZTE-DSL-SYSCTRL-MIB ·
.1.3.6.1.4.1.3902.1004.3.1.2.16
Object
node
No description available.
Context
- MIB
- ZTE-DSL-SYSCTRL-MIB
- OID
.1.3.6.1.4.1.3902.1004.3.1.2.16- Type
- node
- Parent
- zxDslEnvMon
- Siblings
- 16
- Children
- 8
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxDslEnvChassisTemperature The current temperature of the chassis. | scalar | centigrade SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1004.3.1.2.1 |
| zxDslEnvFanTable The table of fan's managed objects.Each row instance represents
a controllable fan unit,may be a controlled fan or a controlled fan tray.
When zxDslEnvFanOperstatus an… | table | - | .1.3.6.1.4.1.3902.1004.3.1.2.10 |
| zxDslEnvDeviceTable The table of environment monitor Device. | table | - | .1.3.6.1.4.1.3902.1004.3.1.2.11 |
| zxDslEnvSwitchTable The table of switch's managed objects.Each row instance represents
a device connected with this switch. | table | - | .1.3.6.1.4.1.3902.1004.3.1.2.12 |
| zxDslEnvExteriorPower | node | - | .1.3.6.1.4.1.3902.1004.3.1.2.13 |
| zxDslEnvBatteriesVoltage | node | - | .1.3.6.1.4.1.3902.1004.3.1.2.14 |
| zxDslEnvPowerFailure | node | - | .1.3.6.1.4.1.3902.1004.3.1.2.15 |
| zxDslEnvMonitorElecLock | node | - | .1.3.6.1.4.1.3902.1004.3.1.2.17 |
| zxDslEnvTemperatureThreshold The threshold of the chassis temperature,zxDslEnvTempExceeded trap
should be generated when zxDslEnvChassisTemperature is lareger than it.
Otherwise,zxDslEnvTempNormal trap shoul… | scalar | centigrade SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1004.3.1.2.2 |
| zxDslEnvTemperatureTrapEnable The administrative status of temperature alarm trap. | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.2.3 |
| zxDslEnvFanMgmtCap The capabilities to be controlled.
speed_control(1) -- The speed of fun can be controlled
alarm_send(2) -- Alarm of fans can be generated and send to manager.
shutdown_control(… | scalar | Bits | .1.3.6.1.4.1.3902.1004.3.1.2.4 |
| zxDslEnvFanSpeedCtrlType The control type of fan speed.
If fix_Speed(2) is selected,zxDslEnvFanSpeed in zxDslEnvFanTable
should be configured. | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.2.5 |
| zxDslEnvFanTrapEnable The administrative status of fun's alarm trap. | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.2.6 |
| zxDslEnvFanTrayAlarmBeep Enable or disable the alarm beep for fun tray. | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.2.7 |
| zxDslEnvEpmRelaySwitchEnable Enable or disable the EPM relay switch.
if it's disabled, there will be four environment switch,
and if it's enabled, there will be only two environment switch.
Other two environm… | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.2.8 |
| zxDslEnvLossOfPowerTrapEnable Enable or disable the dying gasp event when the device is
power off or power failure. | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.2.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxDslEnvMonitorInterfaceUsage The equipment type connected to the enviroment monitor interface.
The possible values are:
epm(1) - connect to EPM device
battery(2) - direct connect to battery
noUse(3) - s… | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.2.16.1 |
| zxDslEnvMonitorInterfaceTrapEnable Indicates whether linkUp/linkDown traps should be
generated for MonitorInterface. | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.2.16.2 |
| zxDslEnvFanAutoCtrlEnable Enable or disble the autocontrol of fan by temperature. | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.2.16.3 |
| zxDslEnvFanCtrlTemperatureThresh The temperature threshold of fan for start-up or shut down,
in Celsiur scale. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1004.3.1.2.16.4 |
| zxDslEnvTemperatureLowerThreshold The lower threshold of the chassis temperature,the
zxDslTempUnderThreshTrap trap should be generated when
zxDslEnvChassisTemperature is lower than it.
Otherwise,zxDslTempUnderTh… | scalar | centigrade Integer32 | .1.3.6.1.4.1.3902.1004.3.1.2.16.5 |
| zxDslEnvBatteryEnergySavingEnable enable or disable energy saving for battery.
if enabled, device will switch to energy saving mode when the
exterior power lose and battery as power supply. | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.2.16.6 |
| zxDslEnvFanFaultInfo This object indicates the failed fan list.
e.g., 1,3-5 means Fan 1,Fan 3,Fan 4 and Fan 5 are in failure. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3902.1004.3.1.2.16.7 |
| zxDslEnvFanTotalNumber The total Number of Fans. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1004.3.1.2.16.8 |