zxDslAutoSaveToNvmInterval
ZTE-DSL-SYSCTRL-MIB ·
.1.3.6.1.4.1.3902.1004.3.1.4.14
Object
scalar
deprecated
r/w
hours Integer32
The interval to save running configuration of agent to
flash media automatically.
The value 0 means disable the auto save flash operation.
Context
- MIB
- ZTE-DSL-SYSCTRL-MIB
- OID
.1.3.6.1.4.1.3902.1004.3.1.4.14- Type
- scalar
- Access
- readwrite
- Status
- deprecated
- Units
- hours
- Parent
- zxDslCommon
- Siblings
- 22
Syntax
hours Integer32
Values & Constraints
Object Constraints
range: 0-168
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxDslCliPrompt prompt name of the zxDsl. (ex. fasp#) | scalar | OctetString | .1.3.6.1.4.1.3902.1004.3.1.4.1 |
| zxDslTimeZoneOffset Time zone offset.
The zone offset can be 0 for GMT or it can be a value '+' or '-'
from GMT. | scalar | Integer32 | .1.3.6.1.4.1.3902.1004.3.1.4.10 |
| zxDslIsHalfTimeZone Whether it is a half zone.If it is true(1),the local
time should be plused 0.5 hours. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1004.3.1.4.11 |
| zxDslSystemReboot Server as reboot system. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1004.3.1.4.12 |
| zxDslSystemPortList Server as port batch configuring. | scalar | PortList | .1.3.6.1.4.1.3902.1004.3.1.4.13 |
| zxDslTimingSaveModifiedToNvmInterval The interval to save flash if running configuration of
agent modified, value 0 means disable the auto save flash
operation. | scalar | minutes Integer32 | .1.3.6.1.4.1.3902.1004.3.1.4.15 |
| zxDslTimingSaveToNvmInterval The interval to force saving flash , value 0 means disable
the force save saving operation. | scalar | hours Integer32 | .1.3.6.1.4.1.3902.1004.3.1.4.16 |
| zxDslUserSideMtu The user side maximum transmission unit,
the packge from user side will be discard
while it exceed this limit. | scalar | byte Integer32 | .1.3.6.1.4.1.3902.1004.3.1.4.17 |
| zxDslSysMaxPortNumPerSlot The max port number per slot of the device.
This number is used to compute the ifIndex. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1004.3.1.4.18 |
| zxDslSysOutbandPortUsage The usage of outband port.
outbandPort(1) - Switch the port usage to outband port.
cascadePort(2) - Switch the port usage to cascade port. | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.4.19 |
| zxDslLineTestRootMode A flag is to indicate whether the MasterToSLave transfering is going on. | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.4.2 |
| zxDslEPMConfType the EPM config type. | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.4.3 |
| zxDslPerfStatTable This table provides one row for each adsl interface.
Each row contains the perf statistic parameters for this adsl line | table | - | .1.3.6.1.4.1.3902.1004.3.1.4.30 |
| zxDslUserTable A table contain user information for web and console and telnet.. | table | - | .1.3.6.1.4.1.3902.1004.3.1.4.31 |
| zxDslTrapHostTable This table, which provides Trap target. | table | - | .1.3.6.1.4.1.3902.1004.3.1.4.33 |
| zxDslSysIfCtrlTable An (conceptual) table listing of zxDsl system interface extend attribute. | table | - | .1.3.6.1.4.1.3902.1004.3.1.4.34 |
| zxDslSaveToNvm | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1004.3.1.4.4 |
| zxDslEraseNvm | scalar | Integer32 | .1.3.6.1.4.1.3902.1004.3.1.4.5 |
| zxDslSwapCore The flag that master to slave. | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.4.6 |
| zxDslBorrowBoardSet The borrow board type. | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.4.7 |
| zxDslBorrowBoardGet The actual borrow board type | scalar | Enumeration | .1.3.6.1.4.1.3902.1004.3.1.4.8 |
| zxDslSysDateTime yyyy-mm-dd HH:MM:SS.For example(2001-01-01 02:22:33). | scalar | OctetString | .1.3.6.1.4.1.3902.1004.3.1.4.9 |