zxAnXdsl2XturInitFailTrapEnable
ZTE-AN-XDSL2-MIBII ·
.1.3.6.1.4.1.3902.1015.1001.1.4.1.1.38
Object
column
r/w
Bits
Enables and disables the InitFailureTrap on the xTU-R interface.
unused1 (0) - This bit is no use to enable or disable
the InitFailureTrap on the xTU-R
interface.
lossOfFraming (1) - Value 0 means disable the loss of frame
synchronization trap on the xTU-R
interface.
lossOfSignal (2) - Value 0 means disable the loss of signal
trap on the xTU-R interface.
lossOfPower (3) - Value 0 means disable the loss of power
trap on the xTU-R interface.
unused2 (4) - This bit is no use to enable or disable
the InitFailureTrap on the xTU-R
interface.
lossOfSignalQuality (5) - Value 0 means disable the loss of signal
quality trap on the xTU-C interface.
unused3 (6) - This bit is no use to enable or disable
the InitFailureTrap on the xTU-R
interface.
lossOfSignalAlm (7) - Value 0 means disable the loss of signal
alarm on the xTU-R interface.
lossOfPowerAlm (8) - Value 0 means disable the loss of power
alarm on the xTU-R interface.
Context
- MIB
- ZTE-AN-XDSL2-MIBII
- OID
.1.3.6.1.4.1.3902.1015.1001.1.4.1.1.38- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxAnXdsl2AlmThreshPrfEntry
- Table
- zxAnXdsl2AlmThreshPrfTable
- Siblings
- 42
Syntax
Bits
Values & Constraints
Enumerated Values
0 | unused1 |
1 | lossOfFraming |
2 | lossOfSignal |
3 | lossOfPower |
4 | unused2 |
5 | lossOfSignalQuality |
6 | unused3 |
7 | lossOfSignalAlm |
8 | lossOfPowerAlm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2AlmThreshPrfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.1 |
| zxAnXdsl2XtucThreshPtmCrcErrs A threshold for the zxAnXdsl2PMLCurr15MPtmCrcErrs counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.10 |
| zxAnXdsl2XtucThreshPtmCodViol A threshold for the zxAnXdsl2PMLCurr15MPtmCodViol counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.11 |
| zxAnXdsl2XturThreshFecs A threshold for the xdsl2PMLCurr15MFecs counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.12 |
| zxAnXdsl2XturThreshEs A threshold for the xdsl2PMLCurr15MEs counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.13 |
| zxAnXdsl2XturThreshSes A threshold for the xdsl2PMLCurr15MSes counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.14 |
| zxAnXdsl2XturThreshLoss A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.15 |
| zxAnXdsl2XturThreshLofs A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.16 |
| zxAnXdsl2XturThreshLprs A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.18 |
| zxAnXdsl2XturThreshUas A threshold for the xdsl2PMLCurr15MUas counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.19 |
| zxAnXdsl2XtucThreshFecs A threshold for the xdsl2PMLCurr15MFecs counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.2 |
| zxAnXdsl2XturThreshPtmCrcErrs A threshold for the zxAnXdsl2PMLCurr15MPtmCrcErrs counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.20 |
| zxAnXdsl2XturThreshPtmCodViol A threshold for the zxAnXdsl2PMLCurr15MPtmCodViol counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.21 |
| zxAnXdsl2ThreshFailedFullInt A threshold for the xdsl2PMLCurrInit15MfailedFullInits
counter.
The value 0 means that no threshold is specified for the
associated counter. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.22 |
| zxAnXdsl2ThreshFailedShrtInt A threshold for the xdsl2PMLCurrInit15MFailedShortInits
counter.
The value 0 means that no threshold is specified for the
associated counter. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.23 |
| zxAnXdsl2Ch1XtucThrshCodeViol A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.24 |
| zxAnXdsl2Ch1XtucThrshCorrected A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.25 |
| zxAnXdsl2Ch1XturThrshCodeViol A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.26 |
| zxAnXdsl2Ch1XturThrshCorrected A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.27 |
| zxAnXdsl2Ch2XtucThrshCodeViol A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.28 |
| zxAnXdsl2Ch2XtucThrshCorrected A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.29 |
| zxAnXdsl2XtucThreshEs A threshold for the xdsl2PMLCurr15MEs counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.3 |
| zxAnXdsl2Ch2XturThrshCodeViol A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.30 |
| zxAnXdsl2Ch2XturThrshCorrected A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.31 |
| zxAnXdsl2AlmThreshPrfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.32 |
| zxAnXdsl2XtucLowDataRateTolerance Tolerance between zxAnXdsl2ChConfMaxDataRateDs and
xdsl2ChStatusActDataRate(xtuc).
Calculation:
100*(zxAnXdsl2ChConfMaxDataRateDs - xdsl2ChStatusAc… | column | % Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.33 |
| zxAnXdsl2XturLowDataRateTolerance Tolerance between zxAnXdsl2ChConfMaxDataRateUs and
xdsl2ChStatusActDataRate(xtur).
Calculation:
100*(zxAnXdsl2ChConfMaxDataRateUs - xdsl2ChStatusAc… | column | % Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.34 |
| zxAnXdsl2XtucLowDataRateThresh Threshold of xtuc data rate.
If xdsl2ChStatusActDataRate(xtuc) is lower than zxAnXdsl2XtucLowDataRateThresh,
zxAnXdsl2LineXtucLowDataRateTrap will be sent.
A value of `0' will d… | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.35 |
| zxAnXdsl2XturLowDataRateThresh Threshold of xtur data rate.
If xdsl2ChStatusActDataRate(xtur) is lower than zxAnXdsl2XturLowDataRateThresh,
zxAnXdsl2LineXturLowDataRateTrap will be sent.
A value of `0' will d… | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.36 |
| zxAnXdsl2XtucInitFailTrapEnable Enables and disables the InitFailureTrap on the xTU-C interface.
unused1 (0) - This bit is no use to enable or disable
the Ini… | column | Bits | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.37 |
| zxAnXdsl2XtucThreshInpLeftr The LEFTR_THRESH is a configuration parameter that is used to
derive the control parameter leftr_thresh, which specifies the
fraction of NDR that shall be used as the threshold f… | column | Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.39 |
| zxAnXdsl2XtucThreshSes A threshold for the xdsl2PMLCurr15MSes counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.4 |
| zxAnXdsl2XturThreshInpLeftr The LEFTR_THRESH is a configuration parameter that is used to
derive the control parameter leftr_thresh, which specifies the
fraction of NDR that shall be used as the threshold f… | column | Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.40 |
| zxAnXdsl2XtucEsLossRatioThresh XTU-C vectoring error sample loss ratio between
zxAnXdsl2PMLCurr1DayTxEsPkts and zxAnXdsl2PMLCurr1DayRxEsPkts.
Calculation:
Difference= 100 * (zxAn… | column | percent Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.41 |
| zxAnXdsl2XturEsLossRatioThresh XTU-R error sample loss ratio between zxAnXdsl2PMLCurr1DayTxEsPkts
and zxAnXdsl2PMLCurr1DayRxEsPkts.
Calculation:
Difference= 100 * (zxAnXdsl2PMLCurr1DayTxEsPkts -… | column | percent Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.42 |
| zxAnXdsl2XtucThreshInpLeftrs A threshold for the zxAnXdsl2PMChCurr15MInpLeftrs counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.43 |
| zxAnXdsl2XturThreshInpLeftrs A threshold for the zxAnXdsl2PMChCurr15MInpLeftrs counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.44 |
| zxAnXdsl2XtucThreshLoss A threshold for the zxAnXdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.5 |
| zxAnXdsl2XtucThreshLofs A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.6 |
| zxAnXdsl2XtucThreshLols A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.7 |
| zxAnXdsl2XtucThreshLprs A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.8 |
| zxAnXdsl2XtucThreshUas A threshold for the zxAnXdsl2PMLCurr15MUas counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter. | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.9 |