zxAnXdsl2SeltTestStatus

ZTE-AN-XDSL2-MIBII · .1.3.6.1.4.1.3902.1015.1001.1.7.2.1.10

Object

column Enumeration

Possible failure reasons associated with performing Single Ended
Loop Test (SELT) on a DSL line.
Possible values are:
none          (1) - The default value in case LDSF was never
                    requested for the associated line.
success       (2) - The recent command completed
                    successfully.
inProgress    (3) - The Loop Diagnostics process is in
                    progress.
unsupported   (4) - The NE or the line card doesn't support
                    LDSF.
cannotRun     (5) - The NE cannot initiate the command, due
                    to a non specific reason.
aborted       (6) - The Loop Diagnostics process aborted.
failed        (7) - The Loop Diagnostics process failed.
illegalMode   (8) - The NE cannot initiate the command, due
                    to the specific mode of the relevant
                    line.
noResources   (9) - The NE cannot initiate the command, due
                    to lack of internal memory resources.
online        (10)- The CPE is online but not in showtime status.
parallelOverLimit (11)- The number of parallel tests has reached 
                    the upper limit.
showtime      (12)- The CPE is in showtime status.

Context

MIB: ZTE-AN-XDSL2-MIBII
OID: .1.3.6.1.4.1.3902.1015.1001.1.7.2.1.10
Type: column
Access: readonly
Status: current
Parent: zxAnXdsl2SeltLineStatusEntry
Table: zxAnXdsl2SeltLineStatusTable
Siblings: 11

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	none
`2`	success
`3`	inProgress
`4`	unsupported
`5`	cannotRun
`6`	aborted
`7`	failed
`8`	illegalMode
`9`	noResources
`10`	online
`11`	parallelOverLimit
`12`	showtime

Related Objects

Sibling Objects

Object	Type	Syntax	OID
zxAnXdsl2SeltLoopTermStatus Loop Termination Indicator is a state indication of the loop termination.	column	Enumeration	`.1.3.6.1.4.1.3902.1015.1001.1.7.2.1.1`
zxAnXdsl2SeltCapabilities The management capabilities of VDSL card. bit 0: value 1 means support zxAnXdsl2SeltRawDataCmd. bit 1: value 1 means support zxAnXdsl2SeltCalibrateCmd.	column	Bits	`.1.3.6.1.4.1.3902.1015.1001.1.7.2.1.11`
zxAnXdsl2SeltChipsetType Chipset type. Possible values are: lantiq (1) - Use LANTIQ chipset. bcm (2) - Use BCM chipset.	column	Enumeration	`.1.3.6.1.4.1.3902.1015.1001.1.7.2.1.12`
zxAnXdsl2SeltLoopLength This parameter is the physical length (in meters) of the loop between the U-C and the U-R interface. The loop length shall be measured with a granularity of 1 m, with valid range…	column	Unsigned32	`.1.3.6.1.4.1.3902.1015.1001.1.7.2.1.2`
zxAnXdsl2SeltLoopTopology The Loop Topology without cable-type identification is consists of a list of segments that are represented by (len1,gauge1,term1,bt1), (len2,gauge2,term2,bt2)...(lenN,gaugen,term…	column	OctetString	`.1.3.6.1.4.1.3902.1015.1001.1.7.2.1.3`
zxAnXdsl2SeltSplitterMissing This parameter is a indication of a missing or incorrectly installed splitter or micro-filter at the U-R reference point. The value of true means missing splitter …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.3902.1015.1001.1.7.2.1.4`
zxAnXdsl2SeltLineAtten The line attenuation TFlog(f) is the logarithmic power transfer function of the line as a function of frequency when both the near-end and far-end line terminations have the foll…	column	OctetString	`.1.3.6.1.4.1.3902.1015.1001.1.7.2.1.5`
zxAnXdsl2SeltCapacityDs This parameter represents a best-effort estimate of the achievable downstream data rate (in kbit/s) on the loop under test.	column	kbps Unsigned32	`.1.3.6.1.4.1.3902.1015.1001.1.7.2.1.6`
zxAnXdsl2SeltCapacityUs This parameter represents a best-effort estimate of the achievable upstream data rate (in kbit/s) on the loop under test.	column	kbps Unsigned32	`.1.3.6.1.4.1.3902.1015.1001.1.7.2.1.7`
zxAnXdsl2SeltUerScale The scale factor for SELT Uncalibrated Echo Response, it shall be coded as a 32 bit unsigned integer.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.1001.1.7.2.1.8`
zxAnXdsl2SeltCerScale deprecated The scale factor for SELT Calibrated Echo Response, it shall be coded as a 32 bit unsigned integer.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.1001.1.7.2.1.9`