zxAnXdsl2LConfSosTimeWindowUs
ZTE-AN-XDSL2-MIBII ·
.1.3.6.1.4.1.3902.1015.1001.1.3.21.1.3
Object
column
r/w
ms Integer32
The parameter SOS-TIME-us is used in the specification of the
receiver initiated SOS (see 13.4.3/G.993.2). If the value of this
parameter is not zero, the standard SOS triggering criteria are
enabled, and the value corresponds with duration of the time
window used in the standard SOS triggering criteria in the
upstream direction. See G.993.2 for detailed usage rules.
The special value zero indicates that the standard SOS triggering
criteria are disabled, i.e.,vendor-discretionary values may be
used instead of the values configured in the MIB for the following
parameters: SOS-NTONES-us, SOS-CRC-us, SOS-TIME-us.
This parameter applies in the upstream direction. The valid range
of non-zero values is from 64 ms to 16320 ms in steps of 64 ms.
Context
- MIB
- ZTE-AN-XDSL2-MIBII
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.21.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Units
- ms
- Parent
- zxAnXdsl2SosConfPrfEntry
- Table
- zxAnXdsl2SosConfPrfTable
- Siblings
- 13
Syntax
ms Integer32
Values & Constraints
Object Constraints
range: 0-0
range: 64-16320
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2LConfSosPrfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.21.1.1 |
| zxAnXdsl2LConfSosSnrmOffsetRocDs The parameter is defined as the SNR margin offset for the ROC
channel in the downstream direction.
The parameter is used in the specification of the channel
initialization polic… | column | 0.1dB Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.21.1.10 |
| zxAnXdsl2LConfSosSnrmOffsetRocUs The parameter is defined as the SNR margin offset for the ROC
channel in the upstream direction.
The parameter is used in the specification of the channel
initialization policy (… | column | 0.1dB Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.21.1.11 |
| zxAnXdsl2LConfSosMinInpRocDs This parameter contains the minimum impulse noise protection to
apply on the ROC in the downstream direction.
The minimum impulse noise protection is an integer ranging from 0
t… | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection | .1.3.6.1.4.1.3902.1015.1001.1.3.21.1.12 |
| zxAnXdsl2LConfSosMinInpRocUs This parameter contains the minimum impulse noise protection to
apply on the robust ROC in the upstream direction.
The minimum impulse noise protection is an integer ranging from… | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection | .1.3.6.1.4.1.3902.1015.1001.1.3.21.1.13 |
| zxAnXdsl2LConfSosTimeWindowDs The parameter SOS-TIME-ds is used in the specification of the
receiver initiated SOS(see 13.4.3/G.993.2). If the value of this
parameter is not zero, the standard SOS triggering … | column | ms Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.21.1.2 |
| zxAnXdsl2LConfSosNTonesDs This parameter is defined as the minimum percentage of tones in the
downstream MEDLEY SET that must be degraded in order to arm the
first sub-condition of the standard SOS trigge… | column | percentage Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.21.1.4 |
| zxAnXdsl2LConfSosNTonesUs The minimum percentage of tones in the upstream MEDLEY SET that
must be degraded in order to arm the first sub-condition of the
standard SOS triggering criteria (see 13.4.3.2/G.9… | column | percentage Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.21.1.5 |
| zxAnXdsl2LConfSosPrfRowStatus The status of this conceptual row.
The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.
To create a row in this ta… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.21.1.50 |
| zxAnXdsl2LConfSosCrcDs This parameter is defined as the minimum number of normalized CRC
anomalies received in SOSTIME-ds seconds in order to arm the
second sub-condition of the standard SOS triggering… | column | Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.21.1.6 |
| zxAnXdsl2LConfSosCrcUs This parameter is defined as the minimum number of normalized CRC
anomalies received in SOSTIME-us seconds in order to arm the
second sub-condition of the standard SOS triggering… | column | Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.21.1.7 |
| zxAnXdsl2LConfMaximumSosDs This parameter is used in G.993.2 de-activation
(see 12.1.4/G.993.2). If the number of successful SOS procedures
in the downstream direction performed within a 120-second interva… | column | Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.21.1.8 |
| zxAnXdsl2LConfMaximumSosUs This parameter is used in G.993.2 de-activation
(see 12.1.4/G.993.2). If the number of successful SOS procedures
in the upstream direction performed within a 120-second interval … | column | Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.21.1.9 |