zxAnXdsl2LConfProfiles
ZTE-AN-XDSL2-MIBII ·
.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.14
Object
The configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line (PROFILES). It is coded in a bitmap representation (0 if not allowed, 1 if allowed)
Context
- MIB
- ZTE-AN-XDSL2-MIBII
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxAnXdsl2SpectrumConfPrfEntry
- Table
- zxAnXdsl2SpectrumConfPrfTable
- Siblings
- 15
Syntax
VDSL2-LINE-TC-MIBXdsl2LineProfiles
- Source
- VDSL2-LINE-TC-MIBXdsl2LineProfiles
- Base type
Bits
Values & Constraints
Type Values
0 | profile8a |
1 | profile8b |
2 | profile8c |
3 | profile8d |
4 | profile12a |
5 | profile12b |
6 | profile17a |
7 | profile30a |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2SpectrumConfPrfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.1 |
| zxAnXdsl2LConfL0Time The minimum time (in seconds) between an Exit from the L2
state and the next Entry into the L2 state (L0-TIME).
It ranges from 0 to 255 seconds. | column | seconds Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.10 |
| zxAnXdsl2LConfL2Time The minimum time (in seconds) between an Entry into the
L2 state and the first Power Trim in the L2 state and between
two consecutive Power Trims in the L2 State (L2-TIME).
It ran… | column | seconds Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.11 |
| zxAnXdsl2LConfL2Atpr The maximum aggregate transmit power reduction (in dB) that
can be performed at transition of L0 to L2 state or through a
single Power Trim in the L2 state (L2-ATPR).
It ranges fr… | column | dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.12 |
| zxAnXdsl2LConfL2Atprt The total maximum aggregate transmit power reduction
(in dB) that can be performed in an L2 state. This is the
sum of all reductions of L2 Request (i.e., at transition of
L0 to L2… | column | dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.13 |
| zxAnXdsl2LConfUs0Mask The set of profiles which allows the transceivers to support
a subset of allowed settings, as defined in G.993.2 Recommendation. | column | VDSL2-LINE-TC-MIBXdsl2LineUs0Mask | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.15 |
| zxAnXdsl2LConfXtuTransSysEna xTU Transmission System Enabling (xTSE). A list of the
different coding types enabled in this profile. It is coded
in a bit-map representation with 1 or more bits set. A bit
se… | column | ZTE-AN-XDSL2-MIBZxAnXdsl2TransmissionModeType | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.2 |
| zxAnXdsl2LConfScMaskDs Sub-carriers mask. A bitmap of 4096 bits that allows
masking
up to 4096 downstream sub-carriers, depending on NSCds. If
bit i (0 <= i < NSCds) is set to '1', the
respective
… | column | VDSL2-LINE-TC-MIBXdsl2ScMaskDs | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.3 |
| zxAnXdsl2SpectrumPrfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.30 |
| zxAnXdsl2LConfScMaskUs Sub-carriers mask. A bitmap of 4096 bits that allows
masking
up to 4096 downstream sub-carriers, depending on NSCds. If
bit i (0 <= i < NSCus) is set to '1', the
respective
… | column | VDSL2-LINE-TC-MIBXdsl2ScMaskUs | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.4 |
| zxAnXdsl2LConfVdsl2CarMask (VDSL2-CARMASK).
VDSL2 specific Sub-carriers mask. This configuration
parameter defines the restrictions, additional to the band
plan, to determine the set of subcarriers allowed… | column | VDSL2-LINE-TC-MIBXdsl2CarMask | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.5 |
| zxAnXdsl2LConfMsgMinDs Minimum Overhead Rate Downstream. Defines the minimum rate
of
the message-based overhead that shall be maintained by the xTU
in downstream direction. Expressed in bits per sec… | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.6 |
| zxAnXdsl2LConfMsgMinUs Minimum Overhead Rate Upstream. Defines the minimum rate of
the message-based overhead that shall be maintained by the xTU
in upstream direction. Expressed in bits per second an… | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.7 |
| zxAnXdsl2LConfCeFlag (CEFLAG).
This parameter is a bit that enables the use of the optional
cyclic extension values. If the bit is set to 1, the optional
cyclic extension values may be used. Otherwise… | column | VDSL2-LINE-TC-MIBXdsl2LineCeFlag | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.8 |
| zxAnXdsl2LConfPmMode Power management state Enabling (PMMode). Defines the power
states the xTU-C or xTU-R may autonomously transition to on
this line.
The various bit positions are: allowTransitions… | column | VDSL2-LINE-TC-MIBXdsl2LinePmMode | .1.3.6.1.4.1.3902.1015.1001.1.3.12.1.9 |