zxAnXdsl2LConfInpMinEtrUs
ZTE-AN-XDSL2-MIBII ·
.1.3.6.1.4.1.3902.1015.1001.1.3.20.1.10
Object
column
r/w
kbps Unsigned32
GINP configuration parameters of upstream. Minimum allowed value for Expected throughput(ETR). to VDSL:range is 0-200000. to ADSL:range is 0-10240.
Context
- MIB
- ZTE-AN-XDSL2-MIBII
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.20.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Units
- kbps
- Parent
- zxAnXdsl2ExtConfPrfEntry
- Table
- zxAnXdsl2ExtConfPrfTable
- Siblings
- 23
Syntax
kbps Unsigned32
Values & Constraints
Object Constraints
range: 0-200000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2LConfExtPrfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.1 |
| zxAnXdsl2LConfInpMinEtrDs GINP configuration parameters of downstream.
Minimum allowed value for Expected throughput(ETR).
to VDSL:range is 0-200000.
to ADSL:range is 0-131040. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.11 |
| zxAnXdsl2LConfInpMaxEtrUs GINP configuration parameters of upstream.
Maximum allowed value for Expected throughput(ETR).
to VDSL:range is 0-200000.
to ADSL:range is 0-10240. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.12 |
| zxAnXdsl2LConfInpMaxEtrDs GINP configuration parameters of downstream.
Maximum allowed value for Expected throughput(ETR).
to VDSL:range is 0-200000.
to ADSL:range is 0-131040. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.13 |
| zxAnXdsl2LConfInpMaxNetUs GINP configuration parameters of upstream.
Maximum net data rate over alpha1/beta1 interface .
to VDSL:range is 0-200000.
to ADSL:range is 0-10240. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.14 |
| zxAnXdsl2LConfInpMaxNetDs GINP configuration parameters of downstream.
Maximum net data rate over alpha1/beta1 interface.
to VDSL:range is 0-200000.
to ADSL:range is 0-131040. | column | bps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.15 |
| zxAnXdsl2LConfInpShineRatioUs GINP configuration parameters of upstream.
The loss of rate in a 1 second interval expressed as a fraction of
NDR(Net data rate) due to a SHINE impulse noise environment expected… | column | Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.16 |
| zxAnXdsl2LConfInpShineRatioDs GINP configuration parameters of downstream.
The loss of rate in a 1 second interval expressed as a fraction of
NDR(Net data rate) due to a SHINE impulse noise environment expect… | column | Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.17 |
| zxAnXdsl2LConfInpMinReinUs GINP configuration parameters of upstream.
Minimum impulse protection against electrical repetitive impulse
noise in DMT symbols. | column | Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.18 |
| zxAnXdsl2LConfInpMinReinDs GINP configuration parameters of downstream.
Minimum impulse protection against electrical repetitive impulse
noise in DMT symbols. | column | Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.19 |
| zxAnXdsl2LConfInpIaReinFlagUs GINP configuration parameters of upstream.
Configuration flag indicating the inter-arrival of REIN. | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.20 |
| zxAnXdsl2LConfInpIaReinFlagDs GINP configuration parameters of downstream.
Configuration flag indicating the inter-arrival of REIN. | column | Enumeration | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.21 |
| zxAnXdsl2LConfInpMinDelayUs GINP configuration parameters of upstream.
Minimum delay in ms. | column | ms Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.22 |
| zxAnXdsl2LConfInpMinDelayDs GINP configuration parameters of downstream.
Minimum delay in ms. | column | ms Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.23 |
| zxAnXdsl2LFextCancelNotReqBandDs This configuration parameter shall be an array of pairs of
downstream sub-carrier indices. Each pair represents the start and
stop sub-carrier index of a frequency band in which … | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.30 |
| zxAnXdsl2LFextCancelNotReqBandUs This configuration parameter shall be an array of pairs of
upstream sub-carrier indices. Each pair represents the start and
stop sub-carrier index of a frequency band in which FE… | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.31 |
| zxAnXdsl2LConfInpMinShineUs GINP configuration parameters of upstream.
The INPMIN_SHINE_RTX is a configuration parameter that, for the
case of subcarrier spacing of 4.3125kHz, is used to derive the
control… | column | DMT symbol Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.32 |
| zxAnXdsl2LConfInpMinShineDs GINP configuration parameters of upstream.
The INPMIN_SHINE_RTX is a configuration parameter that, for the
case of subcarrier spacing of 4.3125kHz, is used to derive the
control… | column | DMT symbol Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.33 |
| zxAnXdsl2LConfInpMin8ShineUs GINP configuration parameters of upstream.
The INPMIN8_SHINE_RTX is a configuration parameter that, for the
case of subcarrier spacing of 8.625kHz, is used to derive the
control… | column | DMT symbol Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.34 |
| zxAnXdsl2LConfInpMin8ShineDs GINP configuration parameters of upstream.
The INPMIN8_SHINE_RTX is a configuration parameter that, for the
case of subcarrier spacing of 8.625kHz, is used to derive the
control… | column | DMT symbol Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.35 |
| zxAnXdsl2LConfInpMin8ReinUs GINP configuration parameters of upstream.
The INPMIN8_REIN_RTX is a configuration parameter that, for the
case of subcarrier spacing of 8.625kHz, is used to derive the
control … | column | DMT symbol Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.36 |
| zxAnXdsl2LConfInpMin8ReinDs GINP configuration parameters of upstream.
The INPMIN8_REIN_RTX is a configuration parameter that, for the
case of subcarrier spacing of 8.625kHz, is used to derive the
control … | column | DMT symbol Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.37 |
| zxAnXdsl2ExtConfPrfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.50 |