zxAnXdsl2LConfDpboEscmC
ZTE-AN-XDSL2-MIBII ·
.1.3.6.1.4.1.3902.1015.1001.1.3.13.1.6
Object
column
r/w
2^-8 Unsigned32
(DPBOESCMC). The E-side Cable Model parameter C (DPBOESCMC) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back-off (DPBO) depending on this value. The cable model is in terms of three scalars zxAnXdsl2LConfDpboEsCableModelA (DPBOESCMA), zxAnXdsl2LConfDpboEsCableModelB(DPBOESCMB), and zxAnXdsl2LConfDpboEsCableModelC (DPBOESCMC), that are used to estimate the frequency dependent loss of E-side cables calculated from the zxAnXdsl2LConfDpboEsEL (DPBOESEL) parameter. Possible values shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in steps of 2^-8. All values in the range are valid. This parameter is used only for G.993.2.
Context
- MIB
- ZTE-AN-XDSL2-MIBII
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.13.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 2^-8
- Parent
- zxAnXdsl2DpboConfPrfEntry
- Table
- zxAnXdsl2DpboConfPrfTable
- Siblings
- 9
Syntax
2^-8 Unsigned32
Values & Constraints
Object Constraints
range: 0-640
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2DpboConfPrfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.13.1.1 |
| zxAnXdsl2LConfDpboEPsd (DPBOEPSD).
This configuration parameter defines the PSD mask that
is assumed to be permitted at the exchange. This parameter
shall use the same format as zxAnXdsl2LConfPsdMaskDs … | column | VDSL2-LINE-TC-MIBXdsl2PsdMaskDs | .1.3.6.1.4.1.3902.1015.1001.1.3.13.1.2 |
| zxAnXdsl2LConfDpboEsEL (DPBOESEL).
This configuration parameter defines the assumed
electrical length of cables (E-side cables) connecting
exchange based DSL services to a remote flexibility point
(cabi… | column | 0.5 dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.13.1.3 |
| zxAnXdsl2DpboConfPrfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.13.1.30 |
| zxAnXdsl2LConfDpboEscmA (DPBOESCMA).
The E-side Cable Model parameter A (DPBOESCMA) of the
cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet)… | column | 2^-8 Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.13.1.4 |
| zxAnXdsl2LConfDpboEscmB (DPBOESCMB).
The E-side Cable Model parameter B (DPBOESCMB) of the
cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet)… | column | 2^-8 Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.13.1.5 |
| zxAnXdsl2LConfDpboMus (DPBOMUS).
This configuration parameter defines the assumed Minimum Usable
receive PSD mask (in dBm/Hz) for exchange based services,
used to modify parameter zxAnXdsl2LConfDpboFMa… | column | 0.5 dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.13.1.7 |
| zxAnXdsl2LConfDpboFMin (DPBOFMIN).
This configuration parameter defines the minimum frequency
from which the DPBO shall be applied. It ranges from
0 kHz (coded as 0) to 8832 kHz (coded as 2048) in steps… | column | 4.3125 kHz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.13.1.8 |
| zxAnXdsl2LConfDpboFMax (DPBOFMAX).
This configuration parameter defines the maximum frequency at
which DPBO may be applied. It ranges from 138 kHz (coded as 32)
to 29997.75 kHz (coded as 6956) in steps … | column | 4.3125 kHz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.13.1.9 |