zxAnVoipCallerTestSipFailReason
ZTE-AN-VOIP-BASE-MIB ·
.1.3.6.1.4.1.3902.1015.5200.3.12.2.1.15
Object
column
Enumeration
The failed reason of SIP test. This field should be filled when the
value of zxAnVoipCallerTestFailReason is 'sipTestFailure'.
inviteOkButNoBearerData(1) - No bearer traffic was received even
though the test call was successful.
callTimeoutNo200Ok(2) - The test call never completed although
provisional response were received for the INVITE request.
noResponseToInvite(3) - No response was received to the INVITE
request and attempts to retry the INVITE timed out without a
response.
errorCodeAndReasonPhrase(4) - The softswitch returned an error to
the INVITE request.
callCancelledByServer(5) - The softswitch sent a CANCEL for the
INVITE transaction.
callCancelledByOnt(6) - The call was cancelled by the ONT.
lineNotConfigured(7) - The POTS line is not fully configured,
probably due to missing SIP provisioning data.
lineNotInValidState(8)- The POTS line is in the wrong status to
perform the test.
lineNotRegistered(9) - The POTS line is not registered with the
softswitch.
notchFiltersRequired(10) - The notch filter settings in the
configuration profile analog data were missing.
dialToneTestFailure(11) - Dial tone test failure.
Context
- MIB
- ZTE-AN-VOIP-BASE-MIB
- OID
.1.3.6.1.4.1.3902.1015.5200.3.12.2.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- zxAnVoipCallerTestEntry
- Table
- zxAnVoipCallerTestTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | inviteOkButNoBearerData |
2 | callTimeoutNo200Ok |
3 | noResponseToInvite |
4 | errorCodeAndReasonPhrase |
5 | callCancelledByServer |
6 | callCancelledByOnt |
7 | lineNotConfigured |
8 | lineNotInValidState |
9 | lineNotRegistered |
10 | notchFiltersRequired |
11 | dialToneTestFailure |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnVoipCallerTestRack This object indicates the rack number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.1 |
| zxAnVoipCallerTestDialedNumber The number that user dial. Here it is set by manager.
When zxAnVoipCallerTestDialedNumber is used to SFU,
it's size is 1 to 63. | column | OctetString | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.10 |
| zxAnVoipCallerTestStatus The status of test. Agent need keep this parameter updated so that
manager can get the latest status of test by polling.
notStarted(1) - Test is not started.
inProg… | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.11 |
| zxAnVoipCallerTestPortStatus This object indicates the current status of port.
idle(1) - The state of port is idle.
offHook(2) - The state of port is off-hook.
dialTone(3) - The port is playing… | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.12 |
| zxAnVoipCallerTestFailReason The failed reason of test.
other(1) - Other reason.
noDialTone(2) - No dial tone.
noRingBack(3) - No ring back tone.
noAnswer(4) - No answer.
noUpstreamVoice(5) - N… | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.13 |
| zxAnVoipCallerTestFailDetail The failed detail. This field should be filled when the value of
zxAnVoipCallerTestFailReason is 'other'. | column | OctetString | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.14 |
| zxAnVoipCallerTestSipErrorCode The error code of SIP test. This field should be filled when the
value of zxAnVoipCallerTestSipFailReason is
'errorCodeAndReasonPhrase'.
unauthorized(1) - 401 Unau… | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.16 |
| zxAnVoipCallerTestSipDelay Specifies how long it takes to set up bearer traffic RTP packets
for the POTS line being tested in tenths of a second.The delay
measure timer starts when the INVITE is generated… | column | 0.1second Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.17 |
| zxAnVoipCallerTestMode The test mode of caller test.
interactive(1) - normal caller test model.
nonInteractive(2) - in this test mode, if only receive ringback
tone m… | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.18 |
| zxAnVoipCallerTestShelf This object indicates the shelf number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.2 |
| zxAnVoipCallerTestSlot This object indicates the slot number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.3 |
| zxAnVoipCallerTestPort This object indicates the physical port number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.4 |
| zxAnVoipCallerTestOnu When zxAnVoipCallerTestCircuitType are 'onu' or 'gemportOrLlid' or
'servicePort', this object indicates 'onu ID'.
When zxAnVoipCallerTestCircuitType are 'physicalPort' or
'bridgeP… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.5 |
| zxAnVoipCallerTestRowStatus This object is used to create a new row or delete an existing row
in this table. Only 'createAndGo' and 'destroy' need to be
supported. If test is in progress, agent should reject… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.50 |
| zxAnVoipCallerTestCircuitType This object indicates the type of port. | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.6 |
| zxAnVoipCallerTestLogicalId This value is an oid which indicats the logical index.
When zxAnVoipCallerTestCircuitType is 'physicalPort', its value is
'0'.
When zxAnVoipCallerTestCircuitType is… | column | ObjectIdentifier | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.7 |
| zxAnVoipCallerTestAction The object is used to start or stop test. The object could be
specified when creating an entry, also could be specified alone in a
SET operation.
start(1) - Start t… | column | Enumeration | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.8 |
| zxAnVoipCallerTestTimeout The time-out of test. Agent should stop test following regular
on-hook procedure, if the test hasn't completed after time-out yet. | column | seconds Integer32 | .1.3.6.1.4.1.3902.1015.5200.3.12.2.1.9 |