zxAnUapsForceSwap
ZTE-AN-UAPS-MIB ·
.1.3.6.1.4.1.3902.1015.7.1.2.1.11
Object
Force to swap the primary and secondary port. when it is set to 1.
Context
- MIB
- ZTE-AN-UAPS-MIB
- OID
.1.3.6.1.4.1.3902.1015.7.1.2.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxAnUapsGroupEntry
- Table
- zxAnUapsGroupTable
- Siblings
- 20
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnUapsGroupIndex The index of UAPS group.The max numbers of groups is 4. | column | Integer32 | .1.3.6.1.4.1.3902.1015.7.1.2.1.1 |
| zxAnUapsIpLinkStatus The status of ip link. | column | Enumeration | .1.3.6.1.4.1.3902.1015.7.1.2.1.10 |
| zxAnUapsPortWorkingStatus It indicates which port group is in working state. | column | Enumeration | .1.3.6.1.4.1.3902.1015.7.1.2.1.12 |
| zxAnUapsSwapReason It indicates the reason of swap.
NOTE:
BIT 0 is just the MSB of this variable and is NOT the LSB. | column | Enumeration | .1.3.6.1.4.1.3902.1015.7.1.2.1.13 |
| zxAnUapsSupportSlaveSlotPorts Whether support to use slave card's ports to act as
Primary-Secondary port. | column | Enumeration | .1.3.6.1.4.1.3902.1015.7.1.2.1.14 |
| zxAnUapsProtectionTime The protection time of UAPS.When the fail time of port is larger
than it,the UAPS module should failover to the secondary port.
It is only used in uaps mode. | column | second Integer32 | .1.3.6.1.4.1.3902.1015.7.1.2.1.15 |
| zxAnUapsIsInPrtctTime It indicates if the UAPS is in protect time status. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.7.1.2.1.16 |
| zxAnUapsSwapRequestInCache It indicates the swap request in memory. | column | Bits | .1.3.6.1.4.1.3902.1015.7.1.2.1.17 |
| zxAnUapsSwapLastRequest It indicates if there is a swap request in memory. | column | Enumeration | .1.3.6.1.4.1.3902.1015.7.1.2.1.18 |
| zxAnUapsSwapMode It indicates swap mode.
common: If one port of working port list down, all ports will
swap to slave port list.
trunk: Only when all working ports down, ports will swap to
… | column | Enumeration | .1.3.6.1.4.1.3902.1015.7.1.2.1.19 |
| zxAnUapsGroupName The name of UAPS group. | column | OctetString | .1.3.6.1.4.1.3902.1015.7.1.2.1.2 |
| zxAnUapsSecondaryPortLighting Enable\Disable secondary port lighting control function.
When port lighting control is enabled, port lighting is shutdown. | column | Enumeration | .1.3.6.1.4.1.3902.1015.7.1.2.1.20 |
| zxAnUapsGroupRowStatus Rowstatus to create or delete a row of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.7.1.2.1.25 |
| zxAnUapsPrimaryPortList The primary UAPS ports.The max port numbers joined in this portlist
should not be more than 4.
Each number of this variable is ifIndex of a port. | column | ObjectIdentifier | .1.3.6.1.4.1.3902.1015.7.1.2.1.3 |
| zxAnUapsSecondaryPortList The Secondary UAPS ports.The max port numbers joined in this portlist
should not be more than 4. Furthermore, the port numbers joined in
this portlist should be eqaul to the zxA… | column | ObjectIdentifier | .1.3.6.1.4.1.3902.1015.7.1.2.1.4 |
| zxAnUapsAutoFailbackEnable Enable/disable recovery to the UAPS primary port automatically
when the primary port is normal again. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.7.1.2.1.5 |
| zxAnUapsNextHopIp Next Hop Ip.If it is 0.0.0.0, UAPS will not check the link of
Next Hop. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3902.1015.7.1.2.1.6 |
| zxAnUapsIpLinkType The link type used to check ip link status. | column | Enumeration | .1.3.6.1.4.1.3902.1015.7.1.2.1.7 |
| zxAnUapsIpLinkChkRetries The retries of checking link status. | column | Integer32 | .1.3.6.1.4.1.3902.1015.7.1.2.1.8 |
| zxAnUapsIpLinkChkTimeout The timeout of checking link status. | column | sec Integer32 | .1.3.6.1.4.1.3902.1015.7.1.2.1.9 |