zxAnSecSvcPktLimitRip
ZTE-AN-SECURITY-SERVICE-MIB ·
.1.3.6.1.4.1.3902.1015.11.1.2.46
Object
scalar
r/w
pps Integer32
The routing information protocol packet rate limit. It can be set value when zxAnSecSvcPktLimitRipEnable is enabled.
Context
- MIB
- ZTE-AN-SECURITY-SERVICE-MIB
- OID
.1.3.6.1.4.1.3902.1015.11.1.2.46- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- pps
- Parent
- zxAnSecSvcPktLimit
- Siblings
- 55
Syntax
pps Integer32
Values & Constraints
Object Constraints
range: 1-200
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnSecSvcPacketLimitAllEnable | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.1 |
| zxAnSecSvcPacketLimitBpdu | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.10 |
| zxAnSecSvcPacketLimitDhcpEnable | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.11 |
| zxAnSecSvcPacketLimitDhcp | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.12 |
| zxAnSecSvcPacketLimitVbasEnable | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.13 |
| zxAnSecSvcPacketLimitVbas | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.14 |
| zxAnSecSvcPacketLimitPPPOEEnable | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.15 |
| zxAnSecSvcPacketLimitPPPOE | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.16 |
| zxAnSecSvcPacketLimitSNMPEnable | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.17 |
| zxAnSecSvcPacketLimitSNMP | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.18 |
| zxAnSecSvcPktLimitV6IcmpEnable The IPv6 ICMP packets rate limit switch.
It will limit ICMPv6 rate first when zxAnSecSvcPktLimitV6IcmpEnable
is enabled and at least one of the other four subtype switchs is
ena… | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.19 |
| zxAnSecSvcPacketLimitAll | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.2 |
| zxAnSecSvcPktLimitV6Icmp The maximum packets per second of IPv6 ICMP and unit is pps.
It can be set value when zxAnSecSvcPktLimitV6IcmpEnable
is enabled. | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.20 |
| zxAnSecSvcPktLimitV6NsEnable The neighbor solicitation packets rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.21 |
| zxAnSecSvcPktLimitV6Ns The maximum packets per second of neighbor solicitation
and unit is pps. It can be set value when
zxAnSecSvcPktLimitV6NsEnable is enabled. | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.22 |
| zxAnSecSvcPktLimitV6NaEnable The neighbor advertisement packets rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.23 |
| zxAnSecSvcPktLimitV6Na The maximum packets per second of neighbor advertisement
and unit is pps. It can be set value when
zxAnSecSvcPktLimitV6NaEnable is enabled. | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.24 |
| zxAnSecSvcPktLimitV6RsEnable The router solicitation packets rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.25 |
| zxAnSecSvcPktLimitV6Rs The maximum packets per second of router solicitation
and unit is pps. It can be set value when
zxAnSecSvcPktLimitV6RsEnable is enabled. | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.26 |
| zxAnSecSvcPktLimitV6RaEnable The router advertisement packets rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.27 |
| zxAnSecSvcPktLimitV6Ra The maximum packets per second of router advertisement
and unit is pps. It can be set value when
zxAnSecSvcPktLimitV6RaEnable is enabled. | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.28 |
| zxAnSecSvcPktLimitV6DhcpEnable The IPv6 DHCP packets rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.29 |
| zxAnSecSvcPacketLimitArpEnable | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.3 |
| zxAnSecSvcPktLimitV6Dhcp The maximum packets per second of IPv6 DHCP and unit is pps.
It can be set value when zxAnSecSvcPktLimitV6DhcpEnable
is enabled. | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.30 |
| zxAnSecSvcPktLimitSshEnable The SSH packet rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.31 |
| zxAnSecSvcPktLimitSsh The SSH packet rate limit.
It can be set value when zxAnSecSvcPktLimitSshEnable is enabled. | scalar | pps Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.32 |
| zxAnSecSvcPktLimitTelnetEnable The telnet packet rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.33 |
| zxAnSecSvcPktLimitTelnet The telnet packet rate limit.
It can be set value when zxAnSecSvcPktLimitTelnetEnable
is enabled. | scalar | pps Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.34 |
| zxAnSecSvcPktLimitBfdEnable The bidirectional forwarding detection packet rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.35 |
| zxAnSecSvcPktLimitBfd The bidirectional forwarding detection packet rate limit.
It can be set value when zxAnSecSvcPktLimitBfdEnable is enabled. | scalar | pps Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.36 |
| zxAnSecSvcPktLimitZesrEnable The ZTE ethernet switch ring packet rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.37 |
| zxAnSecSvcPktLimitZesr The ZTE ethernet switch ring packet rate limit.
It can be set value when zxAnSecSvcPktLimitZesrEnable is enabled. | scalar | pps Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.38 |
| zxAnSecSvcPktLimitStpEnable The spanning tree protocol packet rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.39 |
| zxAnSecSvcPacketLimitArp | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.4 |
| zxAnSecSvcPktLimitStp The spanning tree protocol packet rate limit.
It can be set value when zxAnSecSvcPktLimitStpEnable is enabled. | scalar | pps Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.40 |
| zxAnSecSvcPktLimitLacpEnable The link aggregation control protocol packet rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.41 |
| zxAnSecSvcPktLimitLacp The link aggregation control protocol packet rate limit.
It can be set value when zxAnSecSvcPktLimitLacpEnable
is enabled. | scalar | pps Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.42 |
| zxAnSecSvcPktLimitLldpEnable The link layer discovery protocol packet rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.43 |
| zxAnSecSvcPktLimitLldp The link layer discovery protocol packet rate limit.
It can be set value when zxAnSecSvcPktLimitLldpEnable is enabled. | scalar | pps Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.44 |
| zxAnSecSvcPktLimitRipEnable The routing information protocol packet rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.45 |
| zxAnSecSvcPktLimitBgpEnable The border gateway protocol packet rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.47 |
| zxAnSecSvcPktLimitBgp The border gateway protocol packet rate limit.
It can be set value when zxAnSecSvcPktLimitBgpEnable is enabled. | scalar | pps Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.48 |
| zxAnSecSvcPktLimitOspfEnable The open shortest path first packet rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.49 |
| zxAnSecSvcPacketLimitIcmpEnable | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.5 |
| zxAnSecSvcPktLimitOspf The open shortest path first packet rate limit.
It can be set value when zxAnSecSvcPktLimitOspfEnable is enabled. | scalar | pps Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.50 |
| zxAnSecSvcPktLimitIsisEnable The intermediate system to intermediate system packet rate limit
switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.51 |
| zxAnSecSvcPktLimitIsis The intermediate system to intermediate system packet rate limit.
It can be set value when zxAnSecSvcPktLimitIsisEnable is enabled. | scalar | pps Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.52 |
| zxAnSecSvcPktLimitLdpEnable The label distribution protocol packet rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.53 |
| zxAnSecSvcPktLimitLdp The label distribution protocol packet rate limit.
It can be set value when zxAnSecSvcPktLimitLdpEnable is enabled. | scalar | pps Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.54 |
| zxAnSecSvcPktLimitCfmEnable The connectivity fault management packet rate limit switch. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.55 |
| zxAnSecSvcPktLimitCfm The connectivity fault management packet rate limit.
It can be set value when zxAnSecSvcPktLimitCfmEnable is enabled. | scalar | pps Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.56 |
| zxAnSecSvcPacketLimitIcmp | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.6 |
| zxAnSecSvcPacketLimitIgmpEnable | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.7 |
| zxAnSecSvcPacketLimitIgmp | scalar | Integer32 | .1.3.6.1.4.1.3902.1015.11.1.2.8 |
| zxAnSecSvcPacketLimitBpduEnable | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.11.1.2.9 |