zxAnAclExtRuleSrcIpMask
ZTE-AN-QOSPCL-MIB ·
.1.3.6.1.4.1.3902.1015.26.1.15.1.6
Object
This is the wildcard mask for the zxAnAclExtRuleSrcIp bits that must match.0 bits in the mask indicate the corresponding bits in the zxAnAclExtRuleSrcIp must match in order for the matching to be successful, and 1 bits are not care bits in the matching. A value of zero causes only IP packets of source address the same as zxAnAclExtRuleSrcIp to match. This object value has to be consistent with the type specified in zxAnAclExtRuleSrcIpType.
Context
- MIB
- ZTE-AN-QOSPCL-MIB
- OID
.1.3.6.1.4.1.3902.1015.26.1.15.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxAnAclExtendedRuleEntry
- Table
- zxAnAclExtendedRuleTable
- Siblings
- 24
Syntax
INET-ADDRESS-MIBInetAddress
- Source
- INET-ADDRESS-MIBInetAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnAclExtAclNumber The number of an extended ACL. | column | Integer32 | .1.3.6.1.4.1.3902.1015.26.1.15.1.1 |
| zxAnAclExtRuleIpProtocol The protocol number field in the IP header used to indicate the
higher layer protocol as specified in RFC 1700.A value of '0xFF'
matches every IP packet.
For exampl… | column | Integer32 | .1.3.6.1.4.1.3902.1015.26.1.15.1.10 |
| zxAnAclExtRuleSrcPortOper Indicates how a packet's source TCP/UDP port number is to
be compared.
If the zxAnAclExtRuleIpProtocol object in the same row does not
indicate TCP or UDP, this o… | column | ZxAnAclPortOperator | .1.3.6.1.4.1.3902.1015.26.1.15.1.11 |
| zxAnAclExtRuleStartSrcPort The source port number of the TCP or UDP protocol. If the
zxAnAclExtRuleSrcPortOper object in the same row is range(7),
this object will be the starting port number of the port r… | column | Integer32 | .1.3.6.1.4.1.3902.1015.26.1.15.1.12 |
| zxAnAclExtRuleEndSrcPort The source port number of the TCP or UDP protocol. If the
zxAnAclExtRuleSrcPortOper object in the same row is range(7),
this object will be the ending port number of the port ran… | column | Integer32 | .1.3.6.1.4.1.3902.1015.26.1.15.1.13 |
| zxAnAclExtRuleDestPortOper Indicates how a packet's destination TCP/UDP port number is to
be compared.
If the zxAnAclExtRuleIpProtocol object in the same row does not
indicate TCP or UDP, t… | column | ZxAnAclPortOperator | .1.3.6.1.4.1.3902.1015.26.1.15.1.14 |
| zxAnAclExtRuleStartDestPort The destination port number of the TCP or UDP protocol. If the
zxAnAclExtRuleDestPortOper object in the same row is range(5),
this object will be the starting port number of the… | column | Integer32 | .1.3.6.1.4.1.3902.1015.26.1.15.1.15 |
| zxAnAclExtRuleEndDestPort The destination port number of the TCP or UDP protocol. If the
zxAnAclExtRuleDestPortOper object in the same row is range(5),
this object will be the ending port number of the p… | column | Integer32 | .1.3.6.1.4.1.3902.1015.26.1.15.1.16 |
| zxAnAclExtRuleTcpEstablished Indicates whether matching established TCP packets.
This object cannot be configured if zxAnAclExtRuleIpProtocol
in the same row is not TCP.
establishedTcp(1) means matching esta… | column | Enumeration | .1.3.6.1.4.1.3902.1015.26.1.15.1.17 |
| zxAnAclExtRuleIcmpType Specifies the ICMP type value to be matched against.
A value of '0xFF' indicates not care about this field.
If the zxAnAclExtRuleIpProtocol object in the same row does not
indica… | column | Integer32 | .1.3.6.1.4.1.3902.1015.26.1.15.1.18 |
| zxAnAclExtRuleIcmpCode Specifies the ICMP code value to be matched against.
A value of '0xFF' indicates not care about this field.
If the zxAnAclExtRuleIpProtocol object in the same row does not
indica… | column | Integer32 | .1.3.6.1.4.1.3902.1015.26.1.15.1.19 |
| zxAnAclExtRuleId The index of a rule within a extended ACL | column | Integer32 | .1.3.6.1.4.1.3902.1015.26.1.15.1.2 |
| zxAnAclExtRulePrecedence Specifies the IP precedence value to be matched against.
Packets can be matched the IP precedence value from 0 to 7.
This object can't be configured simultaneously with
zxAnAclE… | column | Integer32 | .1.3.6.1.4.1.3902.1015.26.1.15.1.20 |
| zxAnAclExtRuleTos Specifies the TOS value to be matched against. Packets can
be matched the TOS value from 0 to 15. This object can't
be configured simultaneously with zxAnAclExtRuleDscp.
A valu… | column | Integer32 | .1.3.6.1.4.1.3902.1015.26.1.15.1.21 |
| zxAnAclExtRuleDscp Specifies the DSCP value to be matched against.
Packets can be matched the DSCP level from 0 to 63.
This object can't be configured simultaneously with
zxAnAclExtRuleTos and zx… | column | Integer32 | .1.3.6.1.4.1.3902.1015.26.1.15.1.22 |
| zxAnAclExtRuleTtl Specifies the TTL value to be matched against.
Packets can be matched the TTL level from 0 to 255.
A value of '0xFFFF' indicates not care about this field. | column | Integer32 | .1.3.6.1.4.1.3902.1015.26.1.15.1.23 |
| zxAnAclExtRuleAccessCtrl Specify packets to be rejected or to be forwarded. | column | Enumeration | .1.3.6.1.4.1.3902.1015.26.1.15.1.3 |
| zxAnAclExtRuleSrcIpType The type of source IP address used by this rule entry. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3902.1015.26.1.15.1.4 |
| zxAnAclExtRuleTimeRangeName Name of the time range | column | OctetString | .1.3.6.1.4.1.3902.1015.26.1.15.1.49 |
| zxAnAclExtRuleSrcIp The source IP address to be matched against for this rule.
A zero value of this variable and a 0xFFFFFF value of variable
zxAnAclExtRuleSrcIpMask causes all source addre… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.26.1.15.1.5 |
| zxAnAclExtRuleRowStatus The status of this conceptual row.
The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.
To create a row in this table, a manager must set this o… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.26.1.15.1.50 |
| zxAnAclExtRuleDestIpType The type of destination IP address used by this rule entry. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3902.1015.26.1.15.1.7 |
| zxAnAclExtRuleDestIp The destination IP address to be matched against for this rule.
A zero value of this variable and a 0xFFFFFF value of variable
zxAnAclExtRuleDestIpMask causes all destination add… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.26.1.15.1.8 |
| zxAnAclExtRuleDestIpMask This is the wildcard mask for the zxAnAclExtRuleDestIp bits
that must match. 0 bits in the mask indicate the corresponding
bits in the zxAnAclExtRuleDestIp must match in order f… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.26.1.15.1.9 |