zxAnQos3VCircuitType
ZTE-AN-QOS3-MIB ·
.1.3.6.1.4.1.3902.1015.21.4.3.1.1.6
Object
column
Enumeration
Virtual circuit type.
Context
- MIB
- ZTE-AN-QOS3-MIB
- OID
.1.3.6.1.4.1.3902.1015.21.4.3.1.1.6- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- zxAnQos3PortConfigEntry
- Table
- zxAnQos3PortConfigTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | physicalPort |
2 | bridgePort |
3 | eponOnu |
4 | gpon |
11 | servicePort |
12 | vlan |
13 | queue |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnQos3Rack Rack number of the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.1 |
| zxAnQosIfTrustMode Trust mode. | column | Enumeration | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.10 |
| zxAnQosIfDefaultCos Default CoS value.
This object is valid only when zxAnQosIfTrustMode is set to
cos. | column | Integer32 | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.11 |
| zxAnQosIfDscpToCosPrf The value of this object is the name of the referenced profile in
the zxAnQos3Dscp2CosProfileTable which applies on this
interface.
This object is valid only when zxAnQosIfTrustM… | column | OctetString | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.12 |
| zxAnQosIfDscpToDropPrecedencePrf The value of this object is the name of the referenced profile in
the zxAnQos3Dscp2DropProfileTable which applies on this
interface.
This object is valid only when zxAnQosIfTrust… | column | OctetString | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.13 |
| zxAnQosIfDscpToDscpPrf The value of this object is the name of the referenced profile in
the zxAnQos3DscpRemarkProfileTable which applies on this
interface.
This object is valid only when zxAnQosIfTrus… | column | OctetString | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.14 |
| zxAnQosIfIngressRateLimit Ingress rate limit.
zxAnQosIfIngressRateLimit is mandatory with
zxAnQosIfIngressBucketSize.
0 means no limit. | column | kbps Integer32 | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.15 |
| zxAnQosIfIngressBucketSize Ingress bucket size.
zxAnQosIfIngressBucketSize is mandatory with
zxAnQosIfIngressRateLimit.
0 means no shaping. | column | kbytes Integer32 | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.16 |
| zxAnQos3Shelf Shelf number of the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.2 |
| zxAnQos3Slot Slot number of the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.3 |
| zxAnQos3Port The port number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.4 |
| zxAnQos3Onu The ONU number. It is 0 in DSL port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.5 |
| zxAnQos3LogicalId Logic index of the interface.
If zxAnQos3VCircuitType is 'physicalPort', its value is 0.
If zxAnQos3VCircuitType is 'bridgePort', this object
indicat… | column | ObjectIdentifier | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.7 |
| zxAnQosIfRateLimit The rate-limit of interface's shaping,
0 is not limit. | column | kbps Integer32 | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.8 |
| zxAnQosIfBucketSize The bucket-size of interface's shaping,
0 is not shaping. | column | kbytes Integer32 | .1.3.6.1.4.1.3902.1015.21.4.3.1.1.9 |