zxAnPethMainPsePowerUsageThresh
ZTE-AN-PETH-MIB ·
.1.3.6.1.4.1.3902.1015.300.1.1.11
Object
scalar
r/w
0.1Watts Integer32
The PSE power usage threshold.
When pethMainPseConsumptionPower is larger than
zxAnPethMainPsePowerUsageThresh, pethMainPowerUsageOnNotification
will be sent.
Value 0 means that pethMainPowerUsageOnNotification is disabled.
Note: zxAnPethMainPsePowerUsageThresh must be less than
zxAnPethMainPsePowerLimit.
Context
- MIB
- ZTE-AN-PETH-MIB
- OID
.1.3.6.1.4.1.3902.1015.300.1.1.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- 0.1Watts
- Parent
- zxAnPethGlobalObjects
- Siblings
- 10
Syntax
0.1Watts Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnPethPsePmMode The power management mode. Possible values are:
none (1) - Power management is not performed by default,
The user must power-up the port manually.
staticPowerWithPriori… | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.300.1.1.1 |
| zxAnPethMainPsePowerLimit The power threshhold of PSE output. | scalar | 0.1Watts Integer32 | .1.3.6.1.4.1.3902.1015.300.1.1.10 |
| zxAnPethPseActualCurrent The actual momentary current. | scalar | mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.300.1.1.2 |
| zxAnPethPseActualVoltage The actual momentary input line voltage. | scalar | 0.1V SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.300.1.1.3 |
| zxAnPethPseChipTemp The temperature of the PSE chip. | scalar | centigrade SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.300.1.1.4 |
| zxAnPethPseChipTempAlmThresh The temperature alarm threshold of the PSE chip. | scalar | centigrade Integer32 | .1.3.6.1.4.1.3902.1015.300.1.1.5 |
| zxAnPethPseChipTempTrapEnable Enable/disable the zxAnPethPseChipHighTempAlm and
zxAnPethPseChipHighTempClr. | scalar | Enumeration | .1.3.6.1.4.1.3902.1015.300.1.1.6 |
| zxAnPethPseOutVoltageUpperThresh The upper threshold of PSE output volts.
The alarm should be generated when zxAnPethPseActualVoltage
exceeds this threshold.
zxAnPethPseOutVoltageUpperThresh must be larger than… | scalar | 0.1V Integer32 | .1.3.6.1.4.1.3902.1015.300.1.1.7 |
| zxAnPethPseOutVoltageLowerThresh The lower threshold of PSE output volts.
The alarm should be generated when zxAnPethPseActualVoltage is
lower than this threshold.
zxAnPethPseOutVoltageLowerThresh must be less… | scalar | 0.1V Integer32 | .1.3.6.1.4.1.3902.1015.300.1.1.8 |
| zxAnPethPseFirmwareVersion The PSE firmware version. | scalar | OctetString | .1.3.6.1.4.1.3902.1015.300.1.1.9 |